DATA SHEET SKY67013-396LF: 300 to 1500 MHz Low-Noise, Low-Current Amplifier Applications VBIAS ISM band receivers General purpose LNAs Active Bias RF_OUT/VDD RF_IN Features Stability Network Low NF: 0.85 dB @ 900 MHz Gain: 14 dB @ 900 MHz Flexible supply voltage from 1.8 to 5.0 V Adjustable supply current for higher IIP3 Incorporates on-die stability structures S2395 Figure 1. SKY67013-396LF Block Diagram Description Miniature DFN (8-pin, 2 x 2 mm) package (MSL1 @ 260 C per JEDEC J-STD-020) The SKY67013-396LF is a GaAs, pHEMT low-noise amplifier (LNA) with an integrated active bias. The advanced GaAs pHEMT enhancement mode process provides excellent return loss, low noise, and high linearity. Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. VBIAS 1 8 N/C RF_IN 2 7 RF_OUT/VDD N/C 3 6 N/C N/C 4 5 N/C The device offers the ability to externally adjust the supply current. The supply voltage is applied to the RF-OUT/VDD pin through an RF choke inductor. The VBIAS pin should be connected to the RF_OUT/VDD pin through an external resistor to control the supply current. Both RF_OUT/VDD and RF_IN pins should be DC blocked to ensure proper operation. The SKY67013-396LF is manufactured in a compact, 2 x 2 mm, 8-pin Dual Flat No-Lead (DFN) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. S2396 Figure 2. SKY67013-396LF Pinout – 8-Pin DFN (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201657F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 22, 2015 1 DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER Table 1. SKY67013-396LF Signal Descriptions Pin Name Description Pin Name Description 1 VBIAS Bias for first stage amplifier. External resistor sets current consumption. 5 N/C No connection. May be connected to ground with no change in performance. 2 RF_IN RF input. DC blocking capacitor required. 6 N/C No connection. May be connected to ground with no change in performance. 3 N/C No connection. May be connected to ground with no change in performance. 7 RF_OUT/VDD RF output. Apply VDD through RF choke inductor. DC blocking capacitor required. 4 N/C No connection. May be connected to ground with no change in performance. 8 N/C No connection. May be connected to ground with no change in performance. Electrical and Mechanical Specifications Typical performance characteristics of the SKY67013-396LF are illustrated in Figures 3 through 15 (for 15 mA quiescent current), and Figures 16 through 26 (for 5 mA quiescent current). The absolute maximum ratings of the SKY67013-396LF are provided in Table 2. Electrical specifications are provided in Tables 3 (15 mA operation) and 4 (5 mA operation). Table 2. SKY67013-396LF Absolute Maximum Ratings (Note 1) Typical Maximum Units Supply voltage Parameter VDD 3.3 5.5 V Drain current IDD 15 50 mA RF input power PIN +18 dBm Storage temperature TSTG –65 +25 +125 C Operating temperature TA –40 +25 +85 C Thermal resistance ΘJC Electrostatic discharge: ESD Human Body Model (HBM), Class 1A Symbol Minimum C/W 128 500 V Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 April 22, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201657F DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER Table 3. SKY67013-396LF Electrical Specifications: Supply Current = 15 mA (Note 1) (VDD = 3.3 V, TA = +25 C, PIN = –20 dBm, Characteristic Impedance [ZO] = 50 Ω, Tuning Optimized for 900 MHz, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units 0.85 1.20 dB RF Specifications Noise figure NF Board and connector insertion losses not de-embedded Small signal gain |S21| Input return loss Output return loss 12 14 dB |S11| 23 dB |S22| 16 dB Reverse isolation |S12| 22 dB Third order input intercept point IIP3 Δf = 1 MHz, PIN = –20 dBm/tone +9 +12 dBm Third order output intercept point OIP3 Δf = 1 MHz, PIN = –20 dBm/tone +23 +26 dBm 1 dB input compression point IP1dB +0.5 +2.5 dBm 1 dB output compression point OP1dB +13.5 +15.5 dBm 3.3 V 15 mA DC Specifications Supply voltage VDD Supply current IDD Set with external resistor 10 Note 1: Performance is guaranteed only under the conditions listed in this table. Table 4. SKY67013-396LF Electrical Specifications: Supply Current = 5 mA (Note 1) (VDD = 3.3 V, TA = +25 C, PIN = –20 dBm, Characteristic Impedance [ZO] = 50 Ω, Tuning Optimized for 900 MHz, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units RF Specifications Noise figure NF Board and connector insertion losses not de-embedded 1.1 dB Small signal gain |S21| 12.5 dB Input return loss |S11| 16 dB Output return loss |S22| 14 dB Reverse isolation |S12| 23 dB Third order input intercept point IIP3 Δf = 1 MHz, PIN = –20 dBm/tone +9.5 dBm Third order output intercept point OIP3 Δf = 1 MHz, PIN = –20 dBm/tone +22 dBm 1 dB input compression point IP1dB +4 dBm 1 dB output compression point OP1dB +15.5 dBm 3.3 V 5 mA DC Specifications Supply voltage VDD Supply current IDD Set with external resistor Note 1: Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201657F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 22, 2015 3 DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER Typical Performance Characteristics (VDD = 3.3 V, Quiescent Current = 15 mA, TA = +25 C, PIN = –20 dBm, Characteristic Impedance [Zo] = 50 Ω, Tuning Optimized for 900 MHz, Unless Otherwise Noted) 1.6 15.25 1.4 14.75 Small Signal Gain (dB) Noise Figure (dB) 1.2 1.0 0.8 0.6 0.4 14.50 14.25 14.00 13.75 13.50 13.25 –40 °C +25 °C +85 °C 0.2 13.00 0 800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960 12.75 800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960 Frequency (MHz) Frequency (MHz) Figure 3. Noise Figure vs Frequency and Temperature, Narrow Band (Includes EVB Insertion Losses) Figure 4. Small Signal Gain (|S21|) vs Frequency and Temperature, Narrow Band –10 –21.6 –40 °C +25 °C +85 °C –12 –14 –21.8 Reverse Isolation (dB) Input Return Loss (dB) –40 °C +25 °C +85 °C 15.00 –16 –18 –20 –22 –22.0 –22.2 –22.4 –22.6 –22.8 –40 °C +25 °C +85 °C –23.0 –24 –23.2 –26 800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960 –23.4 800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960 Frequency (MHz) Figure 5. Small Signal Input Return Loss (|S11|) vs Frequency and Temperature, Narrow Band Frequency (MHz) Figure 6. Small Signal Reverse Isolation (|S12|) vs Frequency and Temperature, Narrow Band Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 April 22, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201657F DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER +20 –9 Small Signal Gain (dB) Output Return Loss (dB) –40 °C +25 °C +85 °C +10 –11 –13 –15 –17 –19 –40 °C +25 °C +85 °C –21 0 –10 –20 –30 –23 –40 –25 800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960 –50 0 2 4 6 8 Frequency (MHz) Figure 7. Small Signal Output Return Loss (|S22|) vs Frequency and Temperature, Narrow Band 16 18 20 22 24 –15 Reverse Isolation (dB) Input Return Loss (dB) 14 –5 –5 –10 –15 –40 °C +25 °C +85 °C –20 –25 –35 –45 –65 0 2 4 6 8 10 12 14 16 18 –40 °C +25 °C +85 °C –55 –25 20 22 24 0 2 4 6 8 Frequency (GHz) –5 5 Stability Factor, μ1 6 –10 –15 –40 °C +25 °C +85 °C –20 2 4 6 8 10 12 14 12 14 16 18 20 22 24 Figure 10. Small Signal Reverse Isolation (|S12|) vs Frequency and Temperature, Wide Band 0 0 10 Frequency (GHz) Figure 9. Small Signal Input Return Loss (|S11|) vs Frequency and Temperature, Wide Band Output Return Loss (dB) 12 Figure 8. Small Signal Gain (|S21|) vs Frequency and Temperature, Wide Band 0 –25 10 Frequency (GHz) 16 18 20 22 –40 °C +25 °C +85 °C 4 3 2 1 24 Frequency (GHz) Figure 11. Small Signal Output Return Loss (|S22|) vs Frequency and Temperature, Wide Band 0 0 2 4 6 8 10 12 14 16 18 20 22 24 Frequency (GHz) Figure 12. Stability Factor (μ1) vs Frequency and Temperature, Wide Band Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201657F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 22, 2015 5 DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER 6 5 +18 +16 OP1dB (dBm) Stability Factor, μ2 +20 4 3 2 –40 °C +25 °C +85 °C 1 0 0 2 4 6 8 10 12 14 16 18 20 22 +14 +12 +10 +8 1.8 V 3.3 V 5.0 V +6 +4 +2 0 24 5 10 15 20 Figure 14. OP1dB vs Quiescent Current Figure 13. Stability Factor (μ2) vs Frequency and Temperature, Wide Band +35 +30 OIP3 (dBm) +25 +20 +15 +10 1.8 V 3.3 V 5.0 V +5 0 5 10 15 20 25 30 Quiescent Current (mA) Figure 15. OIP3 vs Quiescent Current Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 25 Quiescent Current (mA) Frequency (GHz) April 22, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201657F 30 DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER Typical Performance Characteristics (VDD = 3.3 V, Quiescent Current = 5 mA, TA = +25 C, PIN = –20 dBm, Characteristic Impedance [Zo] = 50 Ω, Tuning Optimized for 900 MHz, Unless Otherwise Noted) 1.8 14.00 13.75 1.6 Small Signal Gain (dB) Noise Figure (dB) 1.4 1.2 1.0 0.8 0.6 0.4 –40 °C +25 °C +85 °C 0.2 13.25 13.00 12.75 12.50 12.25 12.00 11.75 11.50 11.25 0 800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960 11.00 800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960 Frequency (MHz) Frequency (MHz) Figure 16. Noise Figure vs Frequency and Temperature, Narrow Band (Includes EVB Insertion Losses) Figure 17. Small Signal Gain (|S21|) vs Frequency and Temperature, Narrow Band –23.2 –8 –9 –23.3 –40 °C +25 °C +85 °C –23.4 Reverse Isolation (dB) –10 Input Return Loss (dB) –40 °C +25 °C +85 °C 13.50 –11 –12 –13 –14 –15 –23.5 –23.6 –23.7 –23.8 –23.9 –24.0 –40 °C +25 °C +85 °C –24.1 –16 –24.2 –17 –24.3 –18 800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960 –24.4 800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960 Frequency (MHz) Figure 18. Small Signal Input Return Loss (|S11|) vs Frequency and Temperature, Narrow Band Frequency (MHz) Figure 19. Small Signal Reverse Isolation (|S12|) vs Frequency and Temperature, Narrow Band Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201657F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 22, 2015 7 DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER +20 –5 Small Signal Gain (dB) Output Return Loss (dB) –40 °C +25 °C +85 °C +10 –10 –15 –20 –25 –40 °C +25 °C +85 °C –30 0 –10 –20 –30 –40 –35 800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960 –50 0 2 4 6 8 Frequency (MHz) 10 12 14 16 18 20 22 24 Frequency (GHz) Figure 20. Small Signal Output Return Loss (|S22|) vs Frequency and Temperature, Narrow Band Figure 21. Small Signal Gain (|S21|) vs Frequency and Temperature, Wide Band –5 0 –10 –15 Reverse Isolation (dB) Input Return Loss (dB) –5 –10 –15 –40 °C +25 °C +85 °C –20 –20 –25 –30 –35 –40 –45 –50 –40 °C +25 °C +85 °C –55 –60 –65 –25 0 2 4 6 8 10 12 14 16 18 20 22 0 24 2 4 6 8 Frequency (GHz) Figure 22. Small Signal Input Return Loss (|S11|) vs Frequency and Temperature, Wide Band 12 14 16 18 4.5 24 –40 °C +25 °C +85 °C 4.0 Stability Factor, μ1 –10 –15 –20 –25 –40 °C +25 °C +85 °C –30 –35 22 5.0 –5 0 2 4 6 8 10 12 14 16 18 20 22 3.5 3.0 2.5 2.0 1.5 1.0 0.5 24 Frequency (GHz) Figure 24. Small Signal Output Return Loss (|S22|) vs Frequency and Temperature, Wide Band 0 0 2 4 6 8 10 12 14 16 18 20 22 24 Frequency (GHz) Figure 25. Stability Factor (μ1) vs Frequency and Temperature, Wide Band Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 20 Figure 23. Small Signal Reverse Isolation (|S12|) vs Frequency and Temperature, Wide Band 0 Output Return Loss (dB) 10 Frequency (GHz) April 22, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201657F DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER 5.0 4.5 Stability Factor, μ2 4.0 3.5 3.0 2.5 2.0 1.5 1.0 –40 °C +25 °C +85 °C 0.5 0 0 2 4 6 8 10 12 14 16 18 20 22 24 Frequency (GHz) Figure 26. Stability Factor (μ2) vs Frequency and Temperature, Wide Band Evaluation Board Description Package and Handling Information The SKY67013-396LF Evaluation Board is used to test the performance of the SKY67013-396LF LNA. An assembly drawing for the Evaluation Board is shown in Figure 27. An Evaluation Board schematic diagram is provided in Figure 28. Table 5 provides the Bill of Materials (BOM) list for Evaluation Board components. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions The SKY67013-396LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. The PCB layout footprint for the SKY67013-396LF is provided in Figure 29. Typical part markings are shown in Figure 30. Package dimensions for the 8-pin DFN are shown in Figure 31, and tape and reel dimensions are provided in Figure 32. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201657F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 22, 2015 9 DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER R3 R2 C3 R1 C1 C2 L1 C6 C5 L2 C4 S2394 Figure 27. SKY67013-396LF Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 April 22, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201657F DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER VDD C3 C6 R1 1 N/C VBIAS 8 C5 × L2 C2 L1 2 RF Input RF_IN RF_OUT/VDD 7 C4 RF Output C1 × × 3 N/C N/C N/C N/C 4 6 × 5 × S2397 Figure 28. SKY67013-396LF Evaluation Board Schematic Table 5. SKY67013-396LF Evaluation Board Bill of Materials Component Value Size Manufacturer C1 1.8 pF 0402 Murata GJM C2 20 pF 0402 Murata GJM C3 10 pF 0402 Murata GRM C4 2.4 pF 0402 Murata GRM C5 10000 pF 0402 Murata GRM C6 0.5 pF 0402 Murata GRM L1 10 nH 0402 Murata LQW L2 8.2 nH 0402 Murata LQG R1 (Note 1) 6.2 kΩ 0402 Panasonic R2 0Ω 0402 Panasonic R3 0Ω 0402 Panasonic Note 1: Use 20 kΩ for R1 to achieve 5 mA of quiescent current with 3.3 VDD. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201657F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 22, 2015 11 DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER 8X 0.70 8X 0.45 R0.20 Pin 1 8X 0.25 0.50 Pitch 2X 0.85 0.25 2X 0.45 Exposed Solder Areas (Typical) All dimensions are in millimeters S1413 Figure 29. SKY67013-396LF PCB Layout Footprint (Top View) Pin 1 Indicator Skyworks Part # Figure 30. Typical Part Markings (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12 April 22, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201657F DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER 0.90 +0.10/–0.15 C 2 0.20 Ref Seating Plane A B 0.45 +0.05/–0.07 Exposed Pad Detail A 0.02 +0.03/–0.02 Pin 1 Indicator -B- 2 0.15 C 2X 8X 3 0.08 C Detail C 0.75 ±0.05 0.15 C 2X 1.70 +0.10/–0.15 0.85 +0.05/–0.07 Detail B 2 Places 0.10 C Top View Side View Bottom View R0.12 Typ 0.25 0.30 ± 0.10 -A- CL R0.20 Pin 1 Indicator 0.5 0.25 +0.05/–0.07 5 0.10 M C A B 0.05 M C Detail C 8 Places Detail B Detail A Notes: All measurements are in millimeters. Dimensions and tolerances according to ASME Y14.5M-1994. Coplanarity applies to the exposed heat sink ground pad as well as the terminals. Plating requirement per source control drawing (SCD) 2504. Dimension applies to metallized terminal and is measured between 0.15 mm and 0.30 mm from terminal tip. S1945 Figure 31. SKY67013-396LF 8-Pin DFN Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201657F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 22, 2015 13 DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER ∅1.50+ 0.10/–0.00 0.30 ± 0.05 (T) Pin #1 4.00 ± 0.10 2.00 ± 0.05 4.00 (see Note 4) 1.75 ± 0.10 2.30 (Bo) A B 1.00 (Ko) 2.30 (Ao) 8.00 +0.30/–0.10 A 3.50 ± 0.05 B ∅1.00 Min. R0.30 Typ. B Notes: 1. Carrier tape: black conductive polystyrene. 2. Cover tape material: transparent conductive HSA. 3. Cover tape size: 5.40 mm width. 4. Ten sprocket hole pitch cumulative tolerance = ±0.20 mm. 5. ESD surface resistivity is ≤1 x 108 Ohms/square per EIA, JEDEC tape and reel specification. 6. Ao and Bo measurement point to be 0.30 mm from bottom pocket. 7. All measurements are in millimeters. A Figure 32. SKY67013-396LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 14 April 22, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201657F S1601 DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER Ordering Information Model Name SKY67013-396LF: Low-Noise, Low-Current Amplifier Manufacturing Part Number SKY67013-396LF Evaluation Board Part Number SKY67013-396LF-EVB Copyright © 2011-2012, 2014-2015 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201657F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 22, 2015 15