DATA SHEET SKY13593-690LF: 2.4 to 2.5 GHz SP3T Switch Applications 802.11 a/b/g/n/ac WLAN networks Bluetooth® systems Smartphones Connectivity modules RF1 RFC RF2 Features High isolation: 31 dB (typical) at 2.4 GHz 36 dB (typical) at 2.4 GHz (RF1 to RF2) Excellent linearity performance: P0.1dB = +31 dBm Integrated DC blocking capacitors Miniature, ultra-thin MLP (8-pin, 1.5 × 1.5 mm) package (MSL1, 260 C per JEDEC J-STD-020) Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. RFC 1 8 RF3 N/C 2 7 V3 V1 3 6 V2 RF1 4 5 RF2 Logic and Supply V1 V2 203516-001 RF3 Positive low voltage control: 0/3.0 to 3.6 V Low insertion loss: 0.6 dB (typical) @ 2.4 GHz V3 Figure 1. SKY13593-690LF Block Diagram Description The SKY13593-690LF is a single-pole, triple-throw (SP3T) antenna switch that operates in the 2.4 to 2.5 GHz frequency range. Switching between the antenna (RFC signal) and the RF1, RF2, and RF3 ports is accomplished with three control voltages. The low loss, high isolation, high linearity, small size, and low cost make this switch ideal for all WLAN and Bluetooth systems operating in the 2.4 to 2.5 GHz band. The SKY13593-690LF has integrated DC blocking capacitors, so no external DC blocking capacitors are required. The SKY13593-690LF is manufactured in a compact, 1.5 × 1.5 mm, 8-pin Micro Leadframe Package (MLP). A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. 203516-002 Figure 2. SKY13593-690LF Pinout (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203516C • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • June 2, 2016 1 DATA SHEET • SKY13593-690LF: 2.4 TO 2.5 GHz SP3T SWITCH Table 1. SKY13593-690LF Signal Descriptions Pin 1 Name RFC Description Pin Name Description Antenna 5 RF2 RF port 2 2 N/C No connect 6 V2 Switch logic control (see Table 5) 3 V1 Switch logic control (see Table 4) 7 V3 Switch logic control (see Table 5) 4 RF1 RF port 1 8 RF3 RF port 3 Electrical and Mechanical Specifications The absolute maximum ratings of the SKY13593-690LF are provided in Table 2. Recommended operating conditions are shown in Table 3. Electrical specifications are provided in Table 4. The state of the SKY13593-690LF is determined by the logic provided in Table 5. Table 2. SKY13593-690LF Absolute Maximum Ratings1 Maximum Units Input power Parameter PIN Symbol Minimum Typical +32 dBm Control voltage VCTL 3.7 V Storage temperature TSTG –65 +150 C Operating temperature TOP –40 +90 C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industrystandard ESD handling precautions should be used at all times. Table 3. SKY13593-690LF Recommended Operating Conditions Parameter Symbol Minimum Operating frequency fo 2.4 Control voltage: Low High VCTL_L VCTL_H 3.0 Operating temperature TOP Typical 0 3.3 Maximum Units 2.5 GHz 0.4 3.6 V V +25 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 June 2, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203516C C DATA SHEET • SKY13593-690LF: 2.4 TO 2.5 GHz SP3T SWITCH Table 4. SKY13593-690LF Electrical Specifications1 (VCTL = 0 V and +3.3 V, TOP = +25 °C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 , Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units 0.6 0.8 dB Insertion loss IL 2.4 to 2.5 GHz Isolation RFC to RF1/RF2 or RF3 ISO 2.4 to 2.5 GHz 28 31 dB Isolation RF1 to RF2 ISO 2.4 to 2.5 GHz 34 36 dB Return loss RL 2.4 to 2.5 GHz 15 dB P0.1dB compression point P0.1dB 2.4 to 2.5 GHz +31 dBm –52 –48 dBm dBm 54 dBm Harmonics: fo =2.4 GHz, PIN = +24 dBm, 50 Ω, VCTL = 3.3 V 2fo 3fo Input IP3 IP3 Error vector magnitude EVM Switching speed tsw PIN = +20 dBm/tone, fo = +2.4 GHz Raise/fall time Control current Ictl 50 802.11g, 2.4 GHz, PIN = +24 dBm –47 –43 dB 802.11g, 2.4 GHz, PIN = +25.5 dBm –45 –42 dB 50% VCTL to 90% RF 340 400 ns 10%/90% or 90%/10% RF 150 200 ns 5 10 μA VCTL = 3.3 V 1 Performance is guaranteed only under the conditions listed in this table. Table 5. SKY13593-690LF Truth Table1 V1 V2 V3 RFC - RF1 RFC - RF2 RFC - RF3 1 0 0 ON OFF OFF 0 1 0 OFF ON OFF 0 0 1 OFF OFF ON 1 “1” indicates VCTL = 3.0 to 3.6 V. “0” indicates VCTL = 0 to 0.4 V. Any state other than described in this table places the switch into an undefined state. An undefined state will not damage the device. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203516C • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • June 2, 2016 3 DATA SHEET • SKY13593-690LF: 2.4 TO 2.5 GHz SP3T SWITCH Evaluation Board Description Package and Handling Information The SKY13593-690LF Evaluation Board is used to test the performance of the SKY13593-690LF SP3T Switch. An Evaluation Board schematic diagram is provided in Figure 3. An assembly drawing for the Evaluation Board is shown in Figure 4. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions The SKY13593-690LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to Skyworks Application Note, Solder Reflow Information, document number 200164. The PCB layout footprint for the SKY13593-690LF is provided in Figure 5. Typical part markings are shown in Figure 6. Package dimensions are shown in Figure 7, and tape and reel dimensions are provided in Figure 8. CBL 1 Antenna × 3 Switch Control (See Table 5) CBL RF Port 1 2 4 Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. RFC RF3 N/C V3 V1 V2 RF1 RF2 8 CBL RF Port 3 7 Switch Control (See Table 5) 6 5 Switch Control (See Table 5) CBL RF Port 2 203516-003 Note: CBL = 0 Ω (No external DC blocking capacitors are required). Figure 3. SKY13593-690LF Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 June 2, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203516C RF C 3 RF RF RF DATA SHEET • SKY13593-690LF: 2.4 TO 2.5 GHz SP3T SWITCH V1 V2 V3 2 GND 1 203516-004 Figure 4. SKY13593-690LF Evaluation Board Assembly Diagram 8X 0.55 8X 0.35 8X 0.20 0.15 X 45° 0.40 Pitch 0.60 1.20 0.20 0.05 9X Exposed Solder Area 0.20 0.35 203516-005 0.70 Figure 5. SKY13593-690LF PCB Layout Footprint (Top View) Skyworks Part Number Pin 1 Indicator XXXX is for QYL Code Character 1 = Q/Y Code Characters 2, 3, and 4 = Lot Code 203516-006 Figure 6. Typical Part Markings (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203516C • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • June 2, 2016 5 DATA SHEET • SKY13593-690LF: 2.4 TO 2.5 GHz SP3T SWITCH Exposed Pad C Seating Plane A 1.5 B Pin 1 Indicator 0.15 X 45° Pin 1 Indicator Detail B 0.02 +0.03/–0.02 Detail D 1.20 ± 0.05 Detail C 1.5 Detail A 2X 0.40/0.50 2X 2X 0.05 2X 0.20 0.127 Ref 0.05 C 8X 0.05 C 3 Top View Side View Bottom View 0.175 ± 0.075 0.175 ± 0.075 0.175 ± 0.075 0.175 ± 0.05 0.175 ± 0.05 0.07 0.05 0.70 ± 0.05 0.05 C 0.05 C M M 0.20 ± 0.05 0.07 0.05 C A B C M M C A B C 0.07 0.05 0.15 0.15 M M C A B C 0.15 Detail A Detail B Scale: 2X 1X This Rotation 1X Rotated 180° Detail C Scale: 2X 1X This Rotation 1X Rotated 180° Scale: 2X 2X This Rotation 2X Rotated 180° 8X 0.2 Min 0.4 CL Notes: 1. 2. 3. 4. 5. All measurements are in millimeters. Dimensions and tolerances according to ASME Y14.5M-1994. Coplanarity applies to the exposed heat sink pad as well as the terminals. Plating requirement per source control drawing (SCD) 2504. Dimension applies to metallized terminal, not measured in radius area. 0.2 Detail D 203516-007 Scale: 1X Figure 7. SKY13593-690LF Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 June 2, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203516C DATA SHEET • SKY13593-690LF: 2.4 TO 2.5 GHz SP3T SWITCH 4.00 ± 0.10 2.00 ± 0.05 ϕ1.50± 0.10 0.20 ± 0.02 (T) 1.75 ± 0.10 A 3.50 ± 0.05 1.78 ± 0.05 (Bo) B A 8.00 +0.30 –0.10 Pin 1 5o Max B 0.69 ± 0.05 (Ko) ϕ0.50± 0.05 Section B 5o Max Notes: 1.78 ± 0.05 (Ao) 1. 2. 3. 4. Section A Carrier tape: black conductive polycarbonate or polystyrene. Cover tape: transparent conductive material. Cover tape size: 5.4 mm width. All measurements are in millimeters. 203516-008 Figure 8. SKY13593-690LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203516C • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • June 2, 2016 7 DATA SHEET • SKY13593-690LF: 2.4 TO 2.5 GHz SP3T SWITCH Ordering Information Model Name SKY13593-690LF: SP3T Switch Manufacturing Part Number SKY13593-690LF Evaluation Board Part Number SKY13593-690LF-EVB Copyright © 2015-2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 June 2, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203516C