201759A.pdf

DATA SHEET
MAFR-000645-000001: 960-1215 MHz Single Junction
Drop-In Circulator
Applications
• Radar systems
• Power amplifiers
Features
• BeO free
• Operating frequency range: 960 MHz to 1215 MHz
Description
The MAFR-000645-000001 is a single-junction circulator
designed for radar and Power Amplifier (PA) applications. It
operates over the frequency range of 960 MHz to 1215 MHz.
Insertion loss is less than 0.50 dB over an operating temperature
range of –40 °C to +85 °C.
The MAFR-000645-000001 comes in an industry-recognized
package designed for drop-in assembly.
A block diagram of the MAFR-000645-000001 is shown in
Figure 1. The absolute maximum ratings of the MAFR-000645000001 are provided in Table 1.
Electrical specifications are provided in Table 2. Plating
information is shown in Table 3.
Figure 2 shows the package dimensions.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201759A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 24, 2012
1
DATA SHEET • MAFR-000645-000001 DROP-IN CIRCULATOR
Figure 1. MAFR-000645-000001 Block Diagram
Table 1. MAFR-000645-000001 Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Units
Average power
PAVG
200
W
Peak power
PPEAK
1000
W
Operating temperature
TOP
–40
+85
°C
Storage temperature
TST
–55
+125
°C
Note:
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
Table 2. MAFR-000645-000001 Electrical Specifications (Note 1)
(TOP = –40 °C to +85 °C)
Parameter
Frequency range
Symbol
Test Condition
f
Min
Typical
960
Impedance
Max
Units
1215
MHz
0.50
dB
0.40
dB
Ω
50
Insertion loss
IL
Insertion loss
IL
978-1090 MHz
Isolation
Iso
18
20
dB
Return loss
RL
18
20
dB
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Table 3. MAFR-000645-000001 Plating
Section
Material
Plating
Leads
Copper
Silver
Housing
Steel
Nickel
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
January 24, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201759A
DATA SHEET • MAFR-000645-000001 DROP-IN CIRCULATOR
Figure 2. MAFR-000645-000001 Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201759A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 24, 2012
3
DATA SHEET • MAFR-000645-000001 DROP-IN CIRCULATOR
Ordering Information
Model Name
MAFR-000645-000001 Single Junction Drop-In Circulator
Manufacturing Part Number
MAFR-000645-000001
Evaluation Board Part Number
MAFX-999999-000PPR
Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
January 24, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201759A