DC16_73LF_200230B.pdf

DATA SHEET
DC16-73LF: Directional Coupler 0.3 to 2.7 GHz
Features
Coupled
 Low cost
 Low profile
 Available in small SOT-6 package
 Available on tape and reel
Out
In
 MSL1 @ 260 °C per JEDEC J-STD-020
Figure 1. DC16-73LF Block Diagram
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
Description
The DC16-73 is a monolithic directional coupler for low-cost
wireless applications. It offers low loss, good isolation, good
input/output matching and exceptional coupling repeatability. It is
available in the SOT-6 surface mount package.
Figure 1 shows the DC16-73LF functional block diagram. Figure 2
shows the DC16-73LF pinout.
6
OUT
5
GND
4
3
Coupled
2
GND
1
GND
RF IN
Figure 2. DC16-73LF Pinout
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200230B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 29, 2014
1
DATA SHEET • DC16-73LF: DIRECTIONAL COUPLER 0.3 TO 2.7 GHZ
Electrical and Mechanical Specifications
The absolute maximum ratings for the DC16-73LF are shown in
Table 1. Electrical specifications are provided in Table 2.
Typical performance characteristics are shown in Figures 3
through 8.
Table 1. DC16-73LF Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Input power
Minimum
PIN
Maximum
Units
4
W
Operating temperature
TA
–40
+85
C
Storage temperature
TSTG
–65
+150
C
Electrostatic discharge:
ESD
125
V
Human Body Model (HBM), Class 0
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 2. DC16-73LF Electrical Specifications (Note 1)
(TOP = 25 °C, Z0 = 50 Ω, Unless Otherwise Noted)
Parameter
Minimum
Frequency
Typical
1.42
Insertion loss (Note 2)
Isolation
0.25
23
Input VSWR
Output VSWR
Coupling
14.6
Coupled port VSWR
Maximum
Units
Minimum
1.66
GHz
1.71
0.35
dB
24
dB
1.1 : 1
1.3 : 1
1.1 : 1
1.3 : 1
15.6
16.6
1.1 : 1
1.3 : 1
dB
Typical
0.35
22
13.8
Maximum
Units
1.99
GHz
0.45
dB
23
dB
1.1 : 1
1.3 : 1
1.1 : 1
1.3 : 1
14.8
15.8
1.1 : 1
1.3 : 1
Note 1: Performance is guaranteed only under the conditions listed in this table.
Note 2: Coupling loss included.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
August 29, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200230B
dB
DATA SHEET • DC16-73LF: DIRECTIONAL COUPLER 0.3 TO 2.7 GHZ
0.0
1.5
-0.5
1.4
Output VSWR
Insertion Loss (dB)
Typical Performance Characteristics
(TOP = 25 °C, Z0 = 50 Ω, Unless Otherwise Noted)
-1.0
-1.5
-2.0
1.3
1.2
1.1
-2.5
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
2.7
1.0
3.0
0.3
0.6
0.9
Frequency (GHz)
1.8
2.1
2.4
2.7
3.0
2.7
3.0
Figure 4. Output VSWR vs Frequency
0
1.5
Coupled Port VSWR
Isolation (dB)
1.5
Frequency (GHz)
Figure 3. Insertion Loss vs Frequency
-10
-20
-30
1.4
1.3
1.2
1.1
-40
1.0
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
2.7
3.0
0.3
0.6
0.9
Frequency (GHz)
1.2
1.5
1.8
2.1
2.4
Frequency (GHz)
Figure 5. Isolation vs Frequency
Figure 6. Coupled Port VSWR vs Frequency
1.5
-5.0
1.4
-10.0
Coupling (dB)
Input VSWR
1.2
1.3
1.2
-15.0
-20.0
-25.0
1.1
-30.0
1.0
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
Frequency (GHz)
Figure 7. Input VSWR vs Frequency
2.7
3.0
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
2.7
3.0
Frequency (GHz)
Figure 8. Coupling vs Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200230B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 29, 2014
3
DATA SHEET • DC16-73LF: DIRECTIONAL COUPLER 0.3 TO 2.7 GHZ
Package and Handling Information
The DC16-73LF is rated to Moisture Sensitivity Level 1 (MSL1)
at 260 C. They can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
The recommended board layout for the DC16-73LF is shown in
Figure 9. Package dimensions for the device are shown in
Figure 10.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Instructions on the shipping container label regarding exposure
to moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
0.075
0.018 Typ.
0.020
0.015
0.0200 Dia.
Via 3 Places
0.039 Typ.
Material is 10 mil FR4.
Figure 9. DC16-73LF Recommended Board Layout
0.074
(1.90 mm) Ref.
0.126 (3.20 mm)
0.087 (2.20 mm)
Pin 6
0.071 (1.80 mm)
0.052 (1.30 mm)
Pin 1
Indicator
Pin 1
0.037 (0.95 mm) Ref.
0.020 (0.51 mm)
0.014 (0.350 mm)
0.006
(0.15 mm)
0.000
(0.00 mm)
0.057 (1.45 mm)
0.035 (0.90 mm)
5.0° ± 1°
5.0° ± 1°
0.122 (3.10 mm)
0.106 (2.70 mm)
0.012
(0.30 mm)
Typ.
0.014
(0.26 mm)
0.004
(0.10 mm)
0.022 (0.61 mm)
0.004 (0.10 mm)
Figure 10. DC16-73LF Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
August 29, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200230B
DATA SHEET • DC16-73LF: DIRECTIONAL COUPLER 0.3 TO 2.7 GHZ
Copyright © 2002-2005, 2014 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200230B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 29, 2014
5