DATA SHEET SMPA1320-079LF Series: Low Resistance, Low Capacitance, Plastic Packaged PIN Diode Automotive Applications Infotainment Navigation Telematics Garage door openers Wireless control systems Features AEC-Q101 qualified ISO/TS16949 certified facility Resistance: 0.75 Ω typical @ 10 mA Capacitance: 0.23 pF typical @ 30 V Packages rated MSL1, 260 C per JEDEC J-STD-020) Description The SMPA1320-079LF plastic packaged, surface mountable PIN diode is designed for use in high volume switch applications from 10 MHz to more than 10 GHz. The low current performance of this diode (0.9 Ω maximum at 10 mA and 2 Ω typical at 1 mA) makes the SMPA1320-079LF particularly well suited for in-vehicle infotainment applications. Table 1 describes the SMPA1320-079LF package and marking. Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. Table 1. Package and Marking Single SC-79 Green™ SMPA1320-079LF Marking: Cathode and C5 LS = 0.7 nH The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203195B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 6, 2015 1 DATA SHEET • SMPA1320-079LF SERIES: LOW RESISTANCE, LOW CAPACITANCE, PLASTIC PACKAGED PIN DIODE Electrical and Mechanical Specifications Package and Handling Information The absolute maximum ratings of the SMPA1320-079LF are provided in Table 2. Electrical specifications are provided in Table 3. Resistance versus temperature measurements are provided in Table 4. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Typical performance characteristics of the SMPA1320-079LF are illustrated in Figures 1 to 4. Package dimensions are shown in Figure 5, and tape and reel dimensions are provided in Figure 6. The SMPA1320-079LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Table 2. SMPA1320-079LF Absolute Maximum Ratings (Note 1) Parameter Symbol Reverse voltage Minimum Maximum Units 50 V VR Power dissipation @ 25 °C lead temperature PD 250 mW Storage temperature TSTG –65 +150 C Operating temperature TA –65 +150 C Electrostatic discharge: Charged Device Model (CDM), Class 3 Human Body Model (HBM), Class 2 Machine Model (MM), Class B ESD 1000 2000 250 V V V Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. SMPA1320-079LF Electrical Specifications (Note 1) (TA = +25 C, Unless Otherwise Noted) Parameter Symbol Test Condition Max Units 10 μA 0.23 0.30 pF I = 1 mA I = 10 mA 2.00 0.75 0.90 Ω Ω Reverse current IR Capacitance CT F = 1 MHz, V = 30 V Resistance RS F = 100 MHz Min Typical VR = 50 V Forward voltage VF IF = 10 mA 0.85 Carrier lifetime TI IF = 10 mA 0.4 μs 8 μm I region width Note 1: Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 August 6, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203195B V DATA SHEET • SMPA1320-079LF SERIES: LOW RESISTANCE, LOW CAPACITANCE, PLASTIC PACKAGED PIN DIODE Table 4. Resistance vs Temperature @ 500 MHz IF (mA) RS @ –55 °C (Ω) RS @ –15 °C (Ω) RS @ +25 °C (Ω) RS @ +65 °C (Ω) RS @ +100 °C (Ω) 0.02 29.6 29.2 30.8 32.0 32.7 0.10 7.2 7.7 8.3 8.8 8.8 0.3 3.4 3.6 3.8 4.0 4.1 0.5 2.5 2.7 2.8 2.9 3.0 1.0 1.7 1.8 1.9 2.0 1.9 10 0.84 0.85 0.76 0.76 0.67 20 0.73 0.73 0.64 0.64 0.56 100 0.59 0.57 0.47 0.48 0.40 Typical Performance Characteristics 100 Forward Current (mA) Series Resistance (Ω) 100 10 1 10 1 0.1 0.01 0.1 0.01 0.1 1 10 100 400 500 600 700 800 900 1000 Forward Voltage (mV) Forward Current (mA) Figure 2. DC Characteristics Figure 1. Series Resistance vs Current @ 100 MHz 600 0.5 500 Conductance (μS) Capacitance (pF) 0.4 0.3 0.2 0.1 400 0V 300 200 10 V 100 40 V 0 0 0 1 2 5 10 20 Reverse Voltage (V) Figure 3. Capacitance vs Reverse Voltage (1 MHz to 1 GHz) 50 0 500 1000 1500 2000 Frequency (MHz) Figure 4. Conductance vs Frequency and Reverse Voltage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203195B • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • August 6, 2015 3 DATA SHEET • SMPA1320-079LF SERIES: LOW RESISTANCE, LOW CAPACITANCE, PLASTIC PACKAGED PIN DIODE Box or Bar Polarity Indicator Area 0.006 (0.15 mm) Min. 0.010 (0.25 mm) Min. 0.014 (0.35 mm) Max. 1 2 0.028 (0.70 mm) Min. 0.035 (0.90 mm) Max. 0.060 (1.50 mm) Min. 0.067 (1.70 mm) Max. 0.043 (1.10 mm) Min. 0.051 (1.30 mm) Max. 10° Max. 0.020 (0.50 mm) Min. 0.028 (0.70 mm) Max. 0.003 (0.07 mm) Min. 0.008 (0.20 mm) Max. 10° Max. Dimensions are in inches (millimeters shown in parentheses) S1652 Figure 5. SC-79 Package Dimension Drawing Ø1.50± 0.10 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 0.229 ± 0.02 (T) 1.75 ± 0.10 B A B Pin 1 Indicator 0.80 ± 0.05 (Ko) B 8.00 ± 0.20 A 3.50 ± 0.05 1.40 ± 0.05 1.95 ± 0.05 (Bo) 2° Max Ø0.50± 0.05 0.39 ± 0.05 2o Max 0.90 ± 0.05 (Ao) A Notes: 1. Carrier tape: black conductive polycarbonate or polystyrene. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.4 mm width. 4. ESD-surface resistivity is ≤1 x 108 Ohms/square per EIA, JEDEC TNR Specification. 4. All measurements are in millimeters. S2929 Figure 6. SC-79 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 August 6, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203195B DATA SHEET • SMPA1320-079LF SERIES: LOW RESISTANCE, LOW CAPACITANCE, PLASTIC PACKAGED PIN DIODE Copyright © 2014-2015 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203195B • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • August 6, 2015 5