DATA SHEET SMV1405 to SMV1430 Series: Plastic Packaged Abrupt Junction Tuning Varactors Applications High-Q resonators in wireless system VCOs High volume commercial systems Features High Q Low series resistance for low phase noise Packages rated MSL1, 260 °C per JEDEC J-STD-020 Description Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074. The SMV1405 to SMV1430 group of silicon abrupt junction varactor diodes is designed for use in Voltage Controlled Oscillators (VCOs) requiring tight capacitance tolerances. The low resistance of these varactors makes them appropriate for high-Q resonators in wireless system VCOs to frequencies above 10 GHz. This family of varactors is characterized for capacitance over temperature. Table 1 describes the various packages and markings of the SMV1405 to SMV1430 group of varactors. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200068V • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 25, 2016 1 DATA SHEET • SMV1405 TO SMV1430 VARACTORS Table 1. Packaging and Marking Single Single Common Cathode Single SC-79 Green™ SOT-23 SOT-23 SOD-882 Green™ SMV1405-079LF Marking: Cathode and A3 SMV1405-040LF Marking: 5 SMV1408-040LF Marking: DV SMV1408-001LF Green™ Marking: DV1 SMV1413-079LF Marking: Cathode and A4 SMV1413-001LF Green™ Marking: ER1 SMV1413-004LF Green™ Marking: ER3 SMV1430-040LF Marking: 7 LS = 0.7 nH LS = 1.5 nH LS = 1.5 nH LS = 0.45 nH The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Electrical and Mechanical Specifications Package and Handling Information The absolute maximum ratings of the SMV1405 to SMV1430 varactors are provided in Table 2. Electrical specifications are provided in Table 3. Typical capacitance values are listed in Table 4. Typical performance characteristics of the SMV1405 to SMV1430 varactors are illustrated in Figures 1, 2, and 3. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SPICE model for the SMV1405 to SMV1430 varactors is shown in Figure 4, and the associated model parameters are provided in Table 5. The SMV1405 to SMV1430 series of varactors are rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. They can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Package Dimensions Package dimensions are shown in Figures 5 to 9 (odd numbers), and tape and reel dimensions are provided in Figures 6 to 10 (even numbers). Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 January 25, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200068V DATA SHEET • SMV1405 TO SMV1430 VARACTORS Table 2. SMV1405 to SMV1430 Series Absolute Maximum Ratings1 Parameter Symbol Minimum Maximum Units 30 V Reverse voltage VR Forward current IF 20 mA Power dissipation PD 250 mW Operating temperature TOP –55 +125 C Storage temperature TSTG –55 +150 C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. SMV1405 to SMV1430 Series Electrical Specifications1 (TOP = 25 C, Unless Otherwise Noted) Part Number CT @ 0.5 V (pF) CT @ 1 V (pF) CT @ 4 V (pF) CT @ 0 V CT @ 30 V (Ratio) RS @ 4 V, 500 MHz (Ω) Q @ 4 V, 50 MHz Typ. Typ. Min. Max. Min Max. Typ. SMV1405 2.1 1.80 1.21 1.45 4.1 0.80 3200 SMV1408 3.4 2.90 1.71 2.11 4.1 0.60 2900 SMV1413 7.4 6.40 3.64 4.42 4.2 0.35 2400 SMV1430 1.01 0.88 0.46 0.70 3.8 3.15 1680 1 Performance is guaranteed only under the conditions listed in this table. Reverse voltage VR (IR = 10 μA) = 30 V minimum Reverse current IR (VR = 24 V) = 20 nA maximum Total capacitance shown was measured in the SOT-23 single configuration with a typical case capacitance of 0.13 pF. The total capacitance may differ slightly for other packages/configurations. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200068V • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 25, 2016 3 DATA SHEET • SMV1405 TO SMV1430 VARACTORS Table 4. Capacitance vs Reverse Voltage1 CT (pF) VR (V) SMV1405 SMV1408 SMV1413 SMV1430 0 2.67 4.08 9.24 1.24 0.5 2.12 3.36 7.39 1.01 1.0 1.84 2.94 6.37 0.88 1.5 1.70 2.60 5.71 0.80 2.0 1.55 2.38 5.22 0.74 2.5 1.44 2.24 4.85 0.68 3.0 1.34 2.08 4.55 0.65 4.0 1.25 1.88 4.10 0.60 5.0 1.17 1.72 3.77 0.56 10.0 0.95 1.28 2.85 0.44 20.0 0.77 1.01 2.12 0.35 30.0 0.63 0.95 1.77 0.31 1 Total capacitance shown was measured in the SOT-23 single configuration with a typical case capacitance of 0.13 pF. The total capacitance may differ slightly for other packages/configurations. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 January 25, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200068V DATA SHEET • SMV1405 TO SMV1430 VARACTORS Typical Performance Characteristics 1.0 SMV1405 SMV1408 0.1 0 5 10 15 20 25 30 Reverse Voltage (V) +6 +5 +4 +3 +2 +1 0 –1 –2 –3 –4 –5 VR = 4 V VR = 30 V 200068V-002 10.0 Percentage Change (%) SMV1413 200068V-001 Capacitance (pF) 100.0 VR = 1 V –40 –20 0 +20 +40 +60 +80 Temperature (°C) Figure 1. Capacitance vs Reverse Voltage Figure 2. Relative Capacitance Change vs Temperature 1.4 1.0 0.8 0.6 0.4 200068V-003 Capacitance (pF) 1.2 0.2 0 0 5 10 15 20 25 30 Reverse Voltage (V) Figure 3. Capacitance vs Reverse Voltage (SMV1430) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200068V • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 25, 2016 5 DATA SHEET • SMV1405 TO SMV1430 VARACTORS PORT P_anode port = 1 IND LS L = LS RES RS R = RS CAP CP C = CP DIODE Varactor_Diode AREA = 1 MODEL = Diode_Model MODE = nonlinear DIODEM Diode_Model IS = 1.00e-14 RS = 0 N=1 TT = 0 CJO = CJO M=M VJ = VJ EG = 1.11 XTI = 3 KF =0 AF =1 PORT P_Cathode port = 2 FC = 0.5 BV = VB IBV = 1e-3 ISR = 0 NR = 2 IKF = 0 NBV = 1 IBVL = 0 NBVL = 1 TBV1 = 0 TNOM = 27 FFE = 1 200068V-004 Figure 4. SPICE Model Table 5. SPICE Model Parameters Part Number CJO (pF) VJ (V) M CP (pF) RS (Ω) SMV1405 2.37 0.77 0.5 0.29 0.80 SMV1408 3.89 0.92 0.5 0.21 0.60 SMV1413 8.92 0.87 0.5 0.30 0.35 SMV1430 1.11 0.86 0.5 0.13 3.15 Values extracted from measured performance. For package inductance, LS, refer to Table 1. For more details, refer to the Skyworks Application Note, Varactor SPICE Model for Approved RF VCO Applications, document number 200315. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 January 25, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200068V DATA SHEET • SMV1405 TO SMV1430 VARACTORS Box or Bar Polarity Indicator Area 0.006 (0.15 mm) Min. 0.010 (0.25 mm) Min. 0.014 (0.35 mm) Max. 1 0.028 (0.70 mm) Min. 0.035 (0.90 mm) Max. 2 0.060 (1.50 mm) Min. 0.067 (1.70 mm) Max. 0.043 (1.10 mm) Min. 0.051 (1.30 mm) Max. 10° Max. 0.020 (0.50 mm) Min. 0.028 (0.70 mm) Max. 0.003 (0.07 mm) Min. 0.008 (0.20 mm) Max. 10° Max. Dimensions are in inches (millimeters shown in parentheses) 200068V-005 Figure 5. SC-79 Package Dimensions Ø1.50± 0.10 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 0.229 ± 0.02 (T) 1.75 ± 0.10 B A B Pin 1 Indicator 0.80 ± 0.05 (Ko) B 8.00 ± 0.20 A 3.50 ± 0.05 1.40 ± 0.05 1.95 ± 0.05 (Bo) 2° Max Ø0.50± 0.05 0.39 ± 0.05 2o Max 0.90 ± 0.05 (Ao) A Notes: 1. Carrier tape: black conductive polycarbonate or polystyrene. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.4 mm width. 4. ESD-surface resistivity is ≤1 x 108 Ohms/square per EIA, JEDEC TNR Specification. 5. All measurements are in millimeters. 200068V-006 Figure 6. SC-79 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200068V • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 25, 2016 7 DATA SHEET • SMV1405 TO SMV1430 VARACTORS 0.110 (2.80 mm) Min. 0.120 (3.04 mm) Max. 0.012 (0.30 mm) Min. 0.020 (0.50 mm) Max. 3 0.083 (2.10 mm) Min. 0.104 (2.64 mm) Max. 0.047 (1.20 mm) Min. 0.055 (1.40 mm) Max. 2 1 0.037 (0.95 mm) Ref. 0.020 (0.51 mm) Ref. 0.076 (1.92 mm) Ref. 0.035 (0.89 mm) Min. 0.044 (1.12 mm) Max. 0.003 (0.080 mm) Min. 0.008 (0.20 mm) Max. 8° Max. 0.0005 (0.01 mm) Min. 0.004 (0.10 mm) Max. 0.022 (0.55 mm) Ref. Dimensions are in inches (millimeters shown in parentheses) 200068V-007 Figure 7. SOT-23 Package Dimensions 4.00 ø1.00 Min. ø1.5 + 0.1/–0 4.00 (See Note 5) 1.75 ± 0.10 3.50 ± 0.05 A 2.70 (Bo) R 0.3 Max 2.2 1.20 (Ko) 0.8 ± 0.05 1.0 R 0.5 Typ. Pin 1 Indicator 8.00 + 0.3/–0.1 2.00 ± 0.05 0.25 ± 0.05 A 3.10 (Ao) A Notes: 1. 2. 3. 4. 5. 6. 7. Carrier tape: black conductive polycarbonate. Cover tape material: transparent conductive PSA. Cover tape size: 5.40 mm width. Tolerance ±0.10 mm. Ten sprocket hole pitch cumulative tolerance: ±0.2 mm. All measurements are in millimeters. Alternative carrier tape dimensions are: Ao = 3.3 Bo = 2.9 Ko = 1.22 200068V-008 Figure 8. SOT-23 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 January 25, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200068V DATA SHEET • SMV1405 TO SMV1430 VARACTORS 0.03 C Seating Plane 0.05/0.00 Pin 1 Indicator 5 2X 0.25 ± 0.05 C 0.05 2X 0.10 M A B 0.325 Terminal 1 1.000 0.650 B A 0.600 0.46 + 0.04 –0.06 0.05 2X 0.50 ± 0.05 0.10 M A B 4 2X Notes: 1. All measurements are in millimeters. 2. Dimensions and tolerances according to ASME Y14.5M-1994. 3. These packages are used principally for discrete devices. 4. This dimension includes stand-off height and package body thickness, but does not include attached features, e.g., external heatsink or chip capacitors. An integral heatslug is not considered an attached feature. 5. This dimension is primarily terminal plating, but does not include small metal protrusion. 200068V-009 Figure 9. SOD-882 Package Dimensions 4.00 ± 0.10 Cathode Indicator 2.00 ± 0.05 ∅1.55 ± 0.05 (D0) 0.20 8.00 ± 0.1 1.75 ± 0.10 3.50 ± 0.05 1.15 ± 0.05 (Bo) A ∅0.40 ± 0.05 (D1) 0.47 ± 0.05 (Ko) 2.00 ± 0.05 B B A A 0.70 ± 0.05 (A0) Notes: 1. 2. 3. 4. 5. Carrier tape: black conductive polycarbonate. Cover tape: transparent conductive material. Cover tape size: 5.4 mm width. ESD surface resistivity is ≥1 x 104 ~ ≤ 1 x 108 Ohms/square. All dimensions are in millimeters. B 200068V-010 Figure 10. SOD-882 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200068V • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 25, 2016 9 DATA SHEET • SMV1405 TO SMV1430 VARACTORS Copyright © 2002-2007, 2009-2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 January 25, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200068V