PRELIMINARY DATA SHEET SMV2025 Hyperabrupt Tuning Varactors Supplied on Film Frame and Waffle Packs Applications Wide-bandwidth and low phase-noise VCOs Wide-range, voltage-tuned phase shifters and filters Miniature RF and microwave tuners Features Low series resistance and leakage current for low phase-noise VCOs High-capacitance ratio: CT (2 V)/CT (10 V) = 2.2 minimum Broad 18 V tuning range Competitive cross to Toshiba 1SV280 varactor diode in die form Available as: Full wafer on film frame (SMV2025-099) Dice in waffle packs (SMV2025-000) Small footprint chip size: 10.5 x 10.5 x 5.5 mils Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074. Description The SMV2025 series are silicon surface mount, hyperabrupt tuning varactor diodes, excellent for use as high-Q tuning elements in an RF Voltage Controlled Oscillator (VCO), voltagecontrolled phase shifter, or tunable bandpass filter. The minimum capacitance ratio from 2 V to 10 V is 2.2, which makes the SMV2025 series suitable for wide-bandwidth VCOs and wide phase-range phase shifters. The SMV2025-099 is supplied as 100-percent electrically tested, fully singulated wafers mounted on a film frame. The SMV2025-000 is supplied as a 100-percent electrically tested die in waffle packs. The absolute maximum ratings of the SMV2025 varactors are provided in Table 1. Electrical specifications are provided in Table 2. Typical performance characteristics are shown in Figure 1 and Figure 2. Typical capacitance values for reverse voltages between 0 and 20 V are summarized in Table 3. The SPICE model for the SMV2025 die is shown in Figure 3, and the associated model parameters are provided in Table 4. Die mechanical characteristics are listed in Table 5. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202913A • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • June 27, 2013 1 PRELIMINARY DATA SHEET • SMV2025-000 AND SMV2025-099 HYPERABRUPT TUNING VARACTORS Table 1. SMV2025-000/-099 Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units 250 mW Power dissipation at cathode temperature of 25 °C PDIS Reverse voltage VR 20 V Forward current IF 100 mA Junction temperature TJ –55 +150 C Storage temperature TSTG –55 +150 C Electrostatic Discharge: Charged Device Model (CDM), Class 4 Human Body Model (HBM), Class 3A Machine Model (MM), Class C ESD 1000 4000 400 V V V Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 2. SMV2025-000/-099 Electrical Specifications (Note 1) (Note 2) (Cathode Temperature = 25 C, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units 20 nA Reverse breakdown voltage VBR IR = 10 μA Reverse leakage current IR VR = 19 V Junction capacitance CJ2 VR = 2 V, f = 1 MHz 4.12 5.03 pF CJ10 VR = 10 V, f = 1 MHz 1.52 1.93 pF CJ18 VR = 18 V, f = 1 MHz 0.98 1.18 pF Capacitance ratio CJ2/CJ10 Series resistance RS 20 2.27 VR = 1 V, f = 470 MHz V 2.6 0.5 – 0.8 Note 1: Performance is guaranteed only under the conditions listed in this Table and is not guaranteed over the full operating or storage temperature ranges. Operation at elevated temperatures may reduce reliability of the device. Note 2: The SMV2025-000 and SMV2025-099 are 100% tested for junction capacitance, capacitance ratio. reverse leakage current, and breakdown voltage. Electrical rejects of the SMV2025-099 devices (singulated wafer on film frame) are identified with black ink. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 June 27, 2013 • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • 202913A Ω PRELIMINARY DATA SHEET • SMV2025-000 AND SMV2025-099 HYPERABRUPT TUNING VARACTORS Typical Performance Characteristics 10 10 9 7 Capacitance (pF) Capacitance (pF) 8 6 5 4 3 2 1 1 0 0 5 10 15 20 0.1 1 Reverse Voltage (V) 10 100 Reverse Voltage + Contact Potential (V) Figure 1. Capacitance vs Reverse Voltage Figure 2. Capacitance vs Reverse Voltage (Logarithmic Plot) Table 3. Reverse Voltage vs Typical Capacitance VR (V) CT (pF) VR (V) CT (pF) 0 8.81 8.0 2.24 0.5 6.93 9.0 2.03 1.0 5.88 10.0 1.83 1.5 5.18 11.0 1.65 2.0 4.67 12.0 1.50 2.5 4.27 13.0 1.38 3.0 3.94 14.0 1.30 3.5 3.67 15.0 1.24 4.0 3.44 16.0 1.21 4.5 3.23 17.0 1.19 5.0 3.05 18.0 1.17 6.0 2.74 19.0 1.16 7.0 2.47 20.0 1.15 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202913A • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • June 27, 2013 3 DATA SHEET • SMV2025-000 AND SMV2025-099 HYPERABRUPT TUNING VARACTORS PORT P_anode port = 1 IND LS L = LS RES RS R = RS CAP CP C = CP DIODE Varactor_Diode AREA = 1 MODEL = Diode_Model MODE = nonlinear PORT P_Cathode port = 2 DIODEM Diode_Model IS = 1.00e-14 RS = 0 N=1 TT = 0 CJO = CJO M=M VJ = VJ EG = 1.11 XTI = 3 KF =0 AF =1 FC = 0.5 BV = VB IBV = 1e-3 ISR = 0 NR = 2 IKF = 0 NBV = 1 IBVL = 0 NBVL = 1 TBV1 = 0 TNOM = 27 FFE = 1 S1672 Figure 3. SPICE Model Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com August 13, 2009 • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • 201124A 4 PRELIMINARY DATA SHEET • SMV2025-000 AND SMV2025-099 HYPERABRUPT TUNING VARACTORS Table 4. SPICE Model Parameters Part Number CJO (pF) VJ (V) M CP (pF) RS (Ω) LS (nH) SMV2025-000 8.8 1.05 0.7 0.07 0.8 0.15 SMV2025-099 8.8 1.05 0.7 0.07 0.8 0.15 Table 5. SMV2025 Die Characteristics Part Number Quantity of Good Dice Per Wafer Chip Size Chip Thickness Typical Anode Contact Diameter (in) (mm) (in) (mm) (in) (mm) SMV2025-000 N/A 0.0105 x 0.0105 ± 0.002 0.2667 x 0.2667 ± 0.050 0.005 ± 0.001 0.127 ± 0.0254 0.0035 0.0889 SMV2025-099 55,000 minimum 60,000 nominal 0.0105 x 0.0105 ± 0.002 0.2667 x 0.2667 ± 0.050 0.005 ± 0.001 0.127 ± 0.0254 0.0035 0.0889 Package Outline Drawings in Figure 4. The package outline die drawing for the SMV2025099 (full wafer on film frame) is shown in Figure 5. Table 5 identifies the die part numbers with their corresponding quantity per wafer and chip measurements. The package outline die drawing for the SMV2025-000 (dice in waffle packs) is shown The SMV2025-000 is supplied in quantities of 100 pieces per waffle pack. 0.0105 ± 0.002 in (0.2667 ± 0.050 mm) ∅0.0035 in (0.0889 mm) 0.0105 ± 0.002 in (0.2667 ± 0.050 mm) 1 1 2 0.005 ± 0.001 in (0.127 ± 0.0254 mm) Y0001 2 Figure 4. SMV2025-000 Die Outline Drawing (Dice in Waffle Packs) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202913A • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • June 27, 2013 5 PRELIMINARY DATA SHEET • SMV2025-000 AND SMV2025-099 HYPERABRUPT TUNING VARACTORS 0.003 (0.076 mm) Nom. Separation Between Die 0.003 (0.076 mm) Separation Between Die 5.981 (151.92 mm) Outer Ring O.D. 5.520 (140.2 mm) Inner Ring I.D. 3.940 (100 mm) Wafer Dia. Grip Ring Wafer Film Frame Description Wafer on nitto tape Color: light blue Thickness: 2.2–3 mils Tensile strength: 6.6 (lbs. in width) Ring material: plastic 0.236 (5.99 mm) Ring Thickness S1611 Figure 5. SMV2025-099 Die Outline Drawing (Full Wafer on Film Frame) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 June 27, 2013 • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • 202913A PRELIMINARY DATA SHEET • SMV2025-000 AND SMV2025-099 HYPERABRUPT TUNING VARACTORS Ordering Information Model Name Manufacturing Part Number SMV2025-000 (dice, 100 per waffle pack) SMV2025-000 SMV2025-099 (singulated wafer on film frame) SMV2025-099 Copyright © 2013 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202913A • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • June 27, 2013 7