DATA SHEET SMV2026 Series: Surface Mount, Silicon Hyperabrupt Tuning Varactor Diodes Applications Wide-bandwidth and low phase-noise VCOs Wide-range, voltage-tuned phase shifters and filters Miniature RF and microwave tuners Features Low series resistance and leakage current for low phase-noise VCOs High-capacitance ratio: CT (2 V)/CT (10 V) = 2.0 minimum Broad 15-V tuning range Competitive cross to Toshiba 1SV179 varactor diode SC-79 and ultra-small SOD-882 packages (MSL1, 260 C per JEDEC J-STD-020) Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. Description The SMV2026 series are silicon surface-mount, hyperabrupt tuning varactor diodes, excellent for use as high-Q tuning elements in an RF voltage controlled oscillator (VCO), voltagecontrolled phase shifter, or tunable bandpass filter. The minimum capacitance ratio from 2 V to 10 V is 2.0, which makes the SMV2026 series suitable for wide bandwidth VCOs and wide phase- range phase shifters. The SMV2026 is manufactured in a surface-mount, industrystandard SC-79 package and an ultrasmall SOD-882 package that offer very low parasitic inductance and capacitance. Table 1 describes the packages and markings of the SMV2026 series diodes. Table 1. Packaging and Marking Single Single SC-79 Green™ SOD-882 Green™ SMV2026-079LF Marking: Cathode and AE SMV2026-040LF Marking: EC1 LS = 0.70 nH LS = 0.45 nH The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHScompliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201836C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 7, 2015 1 DATA SHEET • SMV2026 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES Electrical and Mechanical Specifications Figure 7 (SOD-882). For the PCB layout footprint, refer to the Skyworks Application Note, Suggested PCB Land Pattern Designs for Leaded and Leadless Packages, and Detailed Surface Mount Guidelines for Leadless Packages, document number 200123. The absolute maximum ratings for the SMV2026 series are provided in Table 2. Electrical specifications are provided in Table 3. Table 4 summarizes the typical capacitance for reverse voltages between 0 and 20 V. Typical performance characteristics are illustrated in Figures 1 and 2. The SPICE model for the SMV2026 series of varactor diodes is shown in Figure 3 and the associated model parameters are provided in Table 5. Package and Handling Information Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions Package dimensions for the SMV2026 series are provided in Figure 4 (SC-79) and Figure 6 (SOD-882). Tape and reel dimensions are provided in Figure 5 (SC-79) and Table 2. SMV2026 Series Absolute Maximum Ratings (Note 1) Parameter Symbol Minimum Maximum Units Forward current IF 100 mA Reverse voltage VR 15 V Dissipated power @ 25 °C PD 250 mW Storage temperature TSTG –55 +200 C Junction temperature TJ –55 +175 C Solder interface temperature TS –40 +85 C Electrostatic discharge: Charged-Device Model (CDM), Class 4 Human Body Model (HBM), Class 3A Machine Model (MM), Class C ESD 2000 4000 400 V V V Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. SMV2026 Series Electrical Specifications (Note 1) (TS = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Reverse current IR VR = 15 V Capacitance CT f = 1 MHz Min VR = 2 V VR = 10 V 14.0 5.5 2.0 Capacitance ratio CTR CT @ 2 V/CT @ 10 V Series resistance RS f = 470 MHz, VR = 5 V Breakdown voltage VBR IR = 10 μA Typical Max Units 20 nA 16.0 6.5 pF pF 2.5 – 0.5 Ω 15 Note 1: Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 August 7, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201836C V DATA SHEET • SMV2026 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES The SMV2026 series are rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. They can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Table 4. Reverse Voltage vs Typical Capacitance VR (V) CT (pF) VR (V) CT (pF) 0 27.09 8 6.92 1 18.01 9 6.29 2 14.27 10 5.69 3 12.06 12 4.58 4 10.52 14 3.74 5 9.35 16 3.28 6 8.41 18 3.10 7 7.62 20 3.01 Typical Performance Characteristics (TA = 25 °C, Unless Otherwise Noted) 30.00 100 Capacitance (pF) Capacitance (pF) 25.00 20.00 15.00 10.00 10 5.00 0.00 1 0 5 10 15 20 Reverse Voltage (VR) Figure 1. Capacitance vs Reverse Voltage 25 1 10 100 Reverse Voltage (VR) Figure 2. Capacitance vs Reverse Voltage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201836C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 7, 2015 3 DATA SHEET • SMV2026 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES PORT P_anode port = 1 IND LS L = LS RES RS R = RS CAP CP C = CP DIODE Varactor_Diode AREA = 1 MODEL = Diode_Model MODE = nonlinear DIODEM Diode_Model IS = 1.00e-14 RS = 0 N=1 TT = 0 CJO = CJO M=M VJ = VJ EG = 1.11 XTI = 3 KF =0 AF =1 PORT P_Cathode port = 2 FC = 0.5 BV = VB IBV = 1e-3 ISR = 0 NR = 2 IKF = 0 NBV = 1 IBVL = 0 NBVL = 1 TBV1 = 0 TNOM = 27 FFE = 1 S1672 Figure 3. SPICE Model Table 5. SPICE Model Parameters Part Number CJO (pF) VJ (V) M CP (pF) RS (Ω) LS (nH) SMV2026-079LF 8.8 1.05 0.65 0.07 0.8 0.70 SMV2026-040LF 8.8 1.05 0.65 0.07 0.8 0.45 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201836C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 7, 2015 4 DATA SHEET • SMV2026 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES Box or Bar Polarity Indicator Area 0.006 (0.15 mm) Min. 0.010 (0.25 mm) Min. 0.014 (0.35 mm) Max. 1 2 0.028 (0.70 mm) Min. 0.035 (0.90 mm) Max. 0.060 (1.50 mm) Min. 0.067 (1.70 mm) Max. 0.043 (1.10 mm) Min. 0.051 (1.30 mm) Max. 10° Max. 0.020 (0.50 mm) Min. 0.028 (0.70 mm) Max. 0.003 (0.07 mm) Min. 0.008 (0.20 mm) Max. 10° Max. Dimensions are in inches (millimeters shown in parentheses) S1652 Figure 4. SMV2026-079LF Package Dimensions (SC-79) Ø1.50± 0.10 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 0.229 ± 0.02 (T) 1.75 ± 0.10 B A B Pin 1 Indicator 0.80 ± 0.05 (Ko) B 8.00 ± 0.20 A 3.50 ± 0.05 1.40 ± 0.05 1.95 ± 0.05 (Bo) 2° Max Ø0.50± 0.05 0.39 ± 0.05 2o Max 0.90 ± 0.05 (Ao) A Notes: 1. Carrier tape: black conductive polycarbonate or polystyrene. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.4 mm width. 4. ESD-surface resistivity is ≤1 x 108 Ohms/square per EIA, JEDEC TNR Specification. 4. All measurements are in millimeters. S2929 Figure 5. SMV2026-079LF Tape and Reel Dimensions (SC-79) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201836C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 7, 2015 5 DATA SHEET • SMV2026 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES 0.650 1.000 0.325 0.600 2X 0.50 ± 0.05 2X 0.25 ± 0.05 Cathode Indicator Bottom View Top View 0.05/0.00 0.46 +0.04/–0.06 Cathode Terminal Side View All dimensions in millimeters S1892 Figure 6. SMV2026-040LF Package Dimensions (SOD-882) 4.00 ± 0.10 Cathode Indicator 2.00 ± 0.05 ∅1.55 ± 0.05 (D0) 0.20 ∅0.40 ± 0.05 (D1) 0.47 ± 0.05 (Ko) 2.00 ± 0.05 B B A A 0.70 ± 0.05 (A0) Notes: 1. Carrier tape: black conductive polycarbonate. 2. Cover tape: transparent conductive material. 3. Cover tape size: 5.4 mm width. 4. ESD surface resistivity is ≥1 x 104 ~ ≤ 1 x 108 Ohms/square. 5. All dimensions are in millimeters. B Figure 7. SMV2026-040LF Tape and Reel Dimensions (SOD-882) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 August 7, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201836C S1922 8.00 ± 0.1 1.75 ± 0.10 3.50 ± 0.05 1.15 ± 0.05 (Bo) A DATA SHEET • SMV2026 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES Ordering Information Model Name SMV2026 Series Surface Mount Hyperabrupt Tuning Varactor Diode Manufacturing Part Number SMV2026-079LF SMV2026-040LF Copyright © 2013, 2015 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201836C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 7, 2015 7