DATA SHEET SKY13416-485LF: 0.1 to 3.8 GHz SP6T Antenna Switch Applications Any 2G/3G/4G antenna diversity or LTE (TDD/FDD) transmit/receive system for which GSM transmit is not required RF1 RF2 Features RF3 Decoder V1 Bias 201679-001 RF6 V2 Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074. RF5 V3 Small QFN (14-pin, 2.0 x 2.0 mm) package (MSL1, 260 C per JEDEC J-STD-020) ANT RF4 VDD Broadband frequency range: 0.1 to 3.8 GHz Low insertion loss: 0.5 dB typical @ 2.7 GHz High isolation: >26 dB @ 2.7 GHz Integrated logic Figure 1. SKY13416-485LF Block Diagram Description The SKY13416-485LF is a single pole, six-throw (SP6T) antenna switch. The high linearity performance and low insertion loss achieved by the SKY13416-485LF make it an ideal choice for main/diversity switching commonly used in LTE-based handsets, data cards, and tablets that use antenna diversity solutions. The SKY13416-485LF is part of a scalable family of products that covers SP4T through SP8T switches that allow up to eight bands of WCDMA/LTE: SKY13414-485LF SP4T Antenna Switch (Data Sheet #201689) SKY13415-485LF SP5T Antenna Switch (Data Sheet #201704) SKY13416-485LF SP6T Antenna Switch (this Data Sheet) SKY13417-485LF SP7T Antenna Switch (Data Sheet #201661) Switching is controlled by three CMOS/TTL-compatible control voltage inputs (V1, V2, and V3). Depending on the logic voltage level applied to the control pins, the ANT pin is connected to one of six switched RF outputs (RF1 to RF6) using a low insertion loss path, while the paths between the ANT pin and the other RF pins are in a high isolation state. No external blocking capacitors are required on the RF paths unless VDC is externally applied. The SKY13416-485LF is manufactured in a compact, 14-pin 2.0 x 2.0 mm, Quad Flat No-Lead (QFN) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. SKY13418-485LF SP8T Antenna Switch (Data Sheet #201712) The symmetric port designs provide flexibility in signal routing for both receive diversity and higher power TD-SCDMA/TDD-LTE, WCDMA/FDD, and LTE transmit/receive applications. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201679G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 24, 2016 1 N/C ANT N/C DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH 14 13 12 RF5 1 11 RF6 RF3 2 10 RF4 RF1 3 9 RF2 VDD 4 8 N/C 7 V1 6 V2 V3 5 201679-002 Figure 2. SKY13416-485LF Pinout (Top View) Table 1. SKY13416-485LF Signal Descriptions1 Pin Name Description Pin 8 Name N/C Description 1 RF5 RF I/O path 5 Not connected 2 RF3 RF I/O path 3 9 RF2 RF I/O path 2 3 RF1 RF I/O path 1 10 RF4 RF I/O path 4 4 VDD DC power supply 11 RF6 RF I/O path 6 5 V3 DC control voltage 3 12 N/C Not connected 6 V2 DC control voltage 2 13 ANT Antenna port 7 V1 DC control voltage 1 14 N/C Not connected 1 Bottom ground paddles must be connected to ground. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 March 24, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201679G DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH Table 2. SKY13416-485LF Absolute Maximum Ratings1 Parameter Minimum Maximum Units VDD 2.5 5.0 V Control voltage (V1, V2, and V3) VCTL –0.5 +3.0 V RF input power (RF1 to RF6): PIN +37.5 +36.5 dBm dBm Supply voltage Symbol 0.1 to 2.7 GHz 3.4 to 3.8 GHz Operating temperature TOP –40 +85 C Storage temperature TSTG –55 +150 C Electrostatic discharge: ESD 500 V Human Body Model (HBM), Class 1B 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Functional Description Electrical and Mechanical Specifications The SKY13416-485LF includes an internal negative voltage generator and decoder that eliminate the need for external DC blocking capacitors on the RF ports. No external components are required for proper operation. DC decoupling capacitors may be added on the VDD and control lines if necessary. The absolute maximum ratings of the SKY13416-485LF are provided in Table 2. Electrical specifications are provided in Table 3. Switching is controlled by three control voltage inputs, V1, V2, and V3. Depending on the logic voltage level applied to the control pins, the antenna pin is connected to one of six switched RF outputs. The isolation matrix shown in Table 5 provides the port-to-port and antenna-to-port isolation for all available RF states at four different frequencies: 1.0 GHz, 2.0 GHz, 2.7 GHz, and 3.8 GHz Table 6 shows the Insertion Loss (IL) and Return Loss (RL). The state of the SKY13416-485LF is determined by the logic shown in Table 4. A seventh state enables RF3 and RF5 at the same time. The output power measured at RF3 and RF5 in this state is 3 dB less than the typical insertion loss. Shutdown mode is enabled by connecting all three control pins (V1, V2, and V3) to logic high. This mode reduces the overall current consumption of the device to 5 A typical. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201679G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 24, 2016 3 DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH Table 3. SKY13416-485LF General Electrical Specifications1 (VDD = 2.6 V, V1 = V2 = V3 = 0/1.8 V, PIN = 0 dBm, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition (Note 2) Min Typical Max Units 2.5 3.0 4.8 V 40 50 μA 1.80 2.70 0.4 V V 0.5 1.0 μA DC Specifications Supply voltage VDD Supply current IDD Control voltage: High Low VCTL_H VCTL_L Control current ICTL Shutdown mode supply current IOFF V1/2/3 = 1.8 V, VDD = 3 V 5 10 μA Turn-on switching time tON 50% of final control voltage to 90% of final RF power, switching between RF1/2/3/4/5/6 1.75 2.20 μs 0.40 0.45 0.50 0.7 0.50 0.55 0.60 0.95 dB dB dB dB 1.35 VCTL = 1.8 V RF Specifications Insertion loss (ANT pin to RF1/2/3/4/5/6 pins) IL 0.1 to 1.0 GHz 1.0 to 2.0 GHz 2.0 to 2.7 GHz 3.4 to 3.8 GHz Isolation (ANT pin to RF1/2/3/4/5/6 pins) Iso 0.1 to 1.0 GHz 1.0 to 2.0 GHz 2.0 to 2.7 GHz 3.4 to 3.8 GHz 36 28 25 17 39 29 27 20 dB dB dB dB Input return loss (ANT pin to RF1/2/3/4/5/6 pins) RL 0.1 to 1.0 GHz 1.0 to 2.0 GHz 2.0 to 2.7 GHz 3.4 to 3.8 GHz 24 23 15 8.5 27 25 18 10 dB dB dB dB 2ND harmonics: 2fo PIN = +26 dBm: +96 +92 dBc dBc +99 +94 dBc dBc +37.5 +36.5 dBm dBm +70 dBm ANT pin to RF1/2/3/4/5/6 pins ANT pin to RF2/3/4/5/6 pins 3RD harmonics: 0.1 to 2.7 GHz 3.4 to 3.8 GHz 3fo ANT pin to RF1/2/3/4/5/6 pins ANT pin to RF2/3/4/5/6 pins PIN = +26 dBm: 0.1 to 2.7 GHz 3.4 to 3.8 GHz 0.1 dB compression point (ANT pin to RF1/2/3/4/5/6 pins) P0.1dB 0.1 GHz to 2.7 GHz 3.4 GHz to 3.8 GHz Third order input intercept point IIP3 @ 2.0 GHz, PIN = +26 dBm, Δf = 1 MHz 1 Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 March 24, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201679G DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH Table 4. SKY13416-485LF Control Logic1 Control Pins Switched RF Outputs V1 (Pin 7) V2 (Pin 6) V3 (Pin 5) RF1 (Pin 3) RF2 (Pin 9) RF3 (Pin 2) RF4 (Pin 10) RF5 (Pin 1) RF6 (Pin 11) 0 0 0 Insertion Loss Isolation Isolation Isolation Isolation Isolation 0 0 1 Isolation Insertion Loss Isolation Isolation Isolation Isolation 0 1 0 Isolation Isolation Insertion Loss Isolation Isolation Isolation 0 1 1 Isolation Isolation Isolation Insertion Loss Isolation Isolation 1 0 0 Isolation Isolation Isolation Isolation Insertion Loss Isolation 1 0 1 Isolation Isolation Isolation Isolation Isolation Insertion Loss 1 1 0 Isolation Isolation Insertion Loss Isolation Insertion Loss Isolation 1 1 1 Shutdown Mode 1 “High” = 1.8 V; “Low” = 0 V. Any state other than that described in this table places the switch into an undefined state. An undefined state will not damage the device. Insertion loss in V1/V2/V3 = 110b state is 3 dB lower than typical insertion loss. Table 5. Isolation Matrix (1 of 2) “On” Port Frequency (GHz) Isolation (dB) RF1 RF2 RF3 RF4 RF5 RF6 Antenna-to-Port RF1 1.0 –48 –41 –42 –39 –38 RF1 2.0 –40 –32 –36 –30 –31 RF1 2.7 –37 –28 –33 –26 –28 RF1 3.8 –32 –18 –34 –25 –31 RF2 1.0 –45 –40 –40 –36 –39 RF2 2.0 –38 –34 –33 –30 –31 RF2 2.7 –35 –31 –29 –27 –27 RF2 3.8 –32 –33 –18 –29 –25 RF3 1.0 –38 –47 –43 –42 –38 RF3 2.0 –31 –40 –36 –31 -31 RF3 2.7 –28 –36 –33 –26 –28 RF3 3.8 –18 –34 –34 –18 –31 RF4 1.0 –44 –38 –40 –37 –43 RF4 2.0 –37 –32 –34 –30 –31 RF4 2.7 –34 –29 –31 –27 -27 RF4 3.8 –33 –18 –33 –29 -19 RF5 1.0 –47 –47 –38 –44 –39 RF5 2.0 –36 –40 –30 –36 –32 RF5 2.7 –31 –36 –27 –33 –29 RF5 3.8 –22 –33 –17 –33 –30 RF6 1.0 –45 –49 –41 –39 –38 RF6 2.0 –38 –37 –35 -31 –31 RF6 2.7 –35 –32 –31 -28 –28 RF6 3.8 –33 –23 –32 -17 –29 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201679G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 24, 2016 5 DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH Table 5. Isolation Matrix (2 of 2) “On” Port Frequency (GHz) Isolation (dB) RF1 RF2 RF3 RF4 RF5 RF6 Port-to-Port RF1 1.0 –52 –31 –52 –44 –43 RF1 2.0 –43 –25 –44 –35 –37 RF1 2.7 –38 –22 –39 –30 –33 RF1 3.8 –32 –23 –29 –21 –24 RF2 1.0 –53 –47 –31 –40 –44 RF2 2.0 –42 –40 –25 –34 –35 RF2 2.7 –38 –37 –22 –31 –30 RF2 3.8 –31 –27 –25 –23 –22 RF3 1.0 –31 –54 –53 –33 –44 RF3 2.0 –24 –44 –44 –26 –37 RF3 2.7 –21 –39 –39 –23 –34 RF3 3.8 –24 –32 –29 –21 –24 RF4 1.0 –54 –31 –48 –41 –33 RF4 2.0 –43 –24 –41 –35 –26 RF4 2.7 –39 –22 –37 –32 –23 RF4 3.8 –30 –25 –27 –23 –22 RF5 1.0 –36 –54 –30 –54 –46 RF5 2.0 –30 –44 –24 –44 –38 RF5 2.7 –27 –39 –21 –39 –34 RF5 3.8 –26 –32 –22 –29 –24 RF6 1.0 –54 –37 –50 –31 –43 RF6 2.0 –43 –30 –41 –24 –36 RF6 2.7 –39 –27 –37 –21 –33 RF6 3.8 –30 –27 –27 –24 –23 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 March 24, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201679G DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH Table 6. Insertion Loss (IL) and Return Loss (RL) Matrix “On” Throw Frequency (GHz) IL (dB) RL_Pole (dB) RL_Throw (dB) RF1 1.0 –0.38 –20 –21 RF1 2.0 –0.47 –18 –19 RF1 2.7 –0.47 –18 –19 RF1 3.8 –0.66 –13 –14 RF2 1.0 –0.36 –20 –21 RF2 2.0 –0.44 –19 –18 RF2 2.7 –0.45 –18 –20 RF2 3.8 –0.63 –13 –14 RF3 1.0 –0.38 –20 –20 RF3 2.0 –0.47 –17 –17 RF3 2.7 –0.49 –16 –18 RF3 3.8 –0.71 –12 –13 RF4 1.0 –0.38 –20 –20 RF4 2.0 –0.47 –17 –17 RF4 2.7 –0.48 –17 –18 RF4 3.8 –0.72 –12 –12 RF5 1.0 –0.40 –19 –20 RF5 2.0 –0.50 –17 –17 RF5 2.7 –0.53 –15 –18 RF5 3.8 –0.80 –11 –12 RF6 1.0 –0.36 –19 –20 RF6 2.0 –0.47 –16 –16 RF6 2.7 –0.49 –16 –17 RF6 3.8 –0.76 –11 –12 Evaluation Board Description Package and Handling Information The SKY13416-485LF Evaluation Board is used to test the performance of the SKY13416-485LF SP6T Switch. An Evaluation Board schematic diagram is provided in Figure 3. An assembly drawing for the Evaluation Board is shown in Figure 4. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions The PCB layout footprint for the SKY13416-485LF is provided in Figure 5. Typical part markings are shown in Figure 6. Package dimensions are shown in Figure 7, and tape and reel dimensions are provided in Figure 8. The SKY13416-485LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, PCB Design & SMT Assembly/Rework Guidelines for MCM-L Packages, document number 101752. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201679G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 24, 2016 7 DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH × RF Output Port 3 RF Output Port 1 N/C 1 12 ANT 13 N/C 14 RF Output Port 5 Antenna × RF5 RF6 RF3 RF4 RF1 RF2 VDD N/C 2 RF Output Port 6 10 3 4 RF Output Port 4 RF Output Port 2 9 DC Control Voltage 3 DC Control Voltage 2 5 6 × V1 V2 8 V3 DC Power 11 DC Control Voltage 1 7 201679-003 Figure 3. SKY13416-485LF Evaluation Board Schematic RF3 RF1 RF5 N/C GND VDD V3 V2 V1 N/C ANT N/C RF2 RF4 RF6 201679-004 Figure 4. SKY13416-485LF Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 March 24, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201679G DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH 14X 0.755 Pin 14 14X 0.395 R0.125 Pin 1 Indicator Pin 1 14X 0.200 6X 0.450 Pitch 2X 0.500 Exposed Soldering Area Package Outline 4X 0.400 Pitch 2X 0.500 201679-005 All measurements in millimeters Figure 5. SKY13416-485LF PCB Layout Footprint (Top View) Pin 1 Indicator Skyworks Part # 201679-006 Figure 6. Typical Part Markings (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201679G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 24, 2016 9 DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH 2.00 Seating Plane –C– –A– R0.125 Pin 1 Indicator See Detail A 0.02 +0.03/–0.02 –B– Pin 1 Indicator (0.500) 8X 0.845 12 14 1 11 6X 0.845 4X 0.225 2.00 4X 0.675 4 8 0.05 C 2X 0.120 Ref. 0.55 ± 0.05 2X 0.05 C 0.05 C 1 ± 0.1 (0.500) 7 Exposed Pad 5 14X 0.065 14X 3 0.05 C 4X 0.400 14X 0.255 1 ± 0.1 Top View Side View Bottom View 0.2 ± 0.05 0.18 ± 0.05 Notes: 4 1. All measurements are in millimeters. 2. Dimensions and tolerances according to ASME Y14.5M-1994. 3. Coplanarity applies to the terminals and all other bottom surface metallization. 4. Dimension applies to metallized terminal. If the terminal has a radius on its end, the width dimension should not be measured in that radius area. 0.10 M C A B Detail A Scale: 100X 3X This Rotation 3X Rotated 180° 4X Rotated 90° CW 4X Rotated 90° CCW Figure 7. SKY13416-485LF Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 March 24, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201679G 201679-007 DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH 2.00 ± 0.05 Ø1.50 + 0.10/–0.00 4.00 ± 0.10 1.75 ± 0.10 Pin 1 0.23 ± 0.05 A 2.25 ± 0.05 7º 3.50 ± 0.05 8.00 ± 0.20 0.70 ± 0.05 (Ko) Section A B 4.00 ± 0.10 A B 7º 2.25 ± 0.05 Section B Notes: 1. 2. 3. 4. 5. Carrier tape must meet all requirements of Skyworks GP01-D232 procurement spec for tape and reel shipping. Carrier tape shall be black conductive polycarbonate bakeable material at 125 ˚C temperature. Cover tape shall be transparent conductive with 5.40 mm width. ESD-surface resistivity must meet all ESD requirements of Skyworks specified on GP01-D232. All measurements are in millimeters. 201679-008 Figure 8. SKY13416-485LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201679G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 24, 2016 11 DATA SHEET • SKY13416-485LF: SP6T ANTENNA SWITCH Ordering Information Model Name SKY13416-485LF: 0.1 to 3.8 GHz SP6T Antenna Switch Manufacturing Part Number SKY13416-485LF Evaluation Board Part Number SKY13416-485LF-EVB Copyright © 2011-2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12 March 24, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201679G