DATA SHEET SKY13592-689LF: 1.0 to 6.0 GHz SPDT Switch Applications WLAN 802.11 a/b/g/n/ac networks INPUT WLAN repeaters ISM band radios OUTPUT2 OUTPUT1 Low power transmit receive systems Smartphones Connectivity modules 203513-001 Features VCTL1 Broadband frequency range: 1.0 to 6.0 GHz VCTL2 Figure 1. SKY13592-689LF Block Diagram Low insertion loss, 0.45 dB typical @ 2.45 GHz High isolation, 35 dB typical @ 2.45 GHz Excellent linearity performance, IP0.1dB = +30 dBm Description Integrated DC blocking capacitors The SKY13592-689LF is a single-pole, double-throw (SPDT) switch intended for mode switching in WLAN applications. Using advanced switching technologies, the SKY13592-689LF maintains low insertion loss and high isolation for all switching paths. Ultra-miniature, MLPD (6-pin, 1 × 1 × 0.5 mm) package (MSL1, 260 C per JEDEC J-STD-020) Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. OUTPUT1 1 GND 2 OUTPUT2 3 6 5 4 The high-linearity performance and low insertion loss achieved by the switch make it an ideal choice for low-power transmit/receive applications. Depending on the logic voltage applied to the control pins (VCTL), the INPUT pin is connected to one of the two switched RF outputs (OUTPUT1 or OUTPUT2) using a low insertion loss path, while the path between the INPUT pin and the other OUTPUT pin is in a high-isolation state. The switch is "reflective short" on the isolated port. VCTL1 The SKY13592-689LF has integrated DC blocking capacitors, so no external DC blocking capacitors are required. INPUT The switch is manufactured in a compact, 1 × 1 × 0.5 mm, 6-pin exposed pad plastic Micro Lead-frame Package Dual (MLPD) package. VCTL2 A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. 203513-002 Figure 2. SKY13592-689LF Pinout (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203513E • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • May 24, 2016 1 DATA SHEET • SKY13592-689LF: 1.0 TO 6.0 GHz SPDT SWITCH Table 1. SKY13592-689LF Signal Descriptions Pin 1 Name OUTPUT1 Description Pin RF port. 4 Name Description VCTL2 DC control voltage 2 2 GND Ground 5 INPUT RF port. 3 OUTPUT2 RF port. 6 VCTL1 DC control voltage 1 Electrical and Mechanical Specifications The absolute maximum ratings of the SKY13592-689LF are provided in Table 2. The recommended operating conditions are specified in Table 3, and electrical specifications are provided in Table 4. The state of the SKY13592-689LF is determined by the logic provided in Table 5. Typical performance characteristics are shown in Figures 3 through 6. Table 2. SKY13592-689LF Absolute Maximum Ratings1 Maximum Units Input power Parameter PIN Symbol Minimum +32 dBm Control voltage VCTL 3.7 V Storage temperature TSTG −65 +150 C Operating temperature TOP −40 +90 C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industrystandard ESD handling precautions should be used at all times. Table 3. SKY13592-689LF Recommended Operating Conditions Parameter Symbol Minimum Operating frequency fo 1.0 Control voltage: Low High VCTL_L VCTL_H 3.0 Operating temperature TOP Typical 0 3.3 Maximum Units 6.0 GHz 0.4 3.6 V V +25 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 May 24, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203513E C DATA SHEET • SKY13592-689LF: 1.0 TO 6.0 GHz SPDT SWITCH Table 4. SKY13592-689LF Electrical Specifications1 (VCTL = 0 V and 3.3 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Minimum Typical Maximum Units 0.45 0.55 0.65 0.8 dB dB Insertion loss IL 1.0 to 2.5 GHz 4.8 to 6.0 GHz Isolation (INPUT to OUTPUT1/OUTPUT2) ISO 1.0 to 2.5 GHz 4.8 to 6.0 GHz 31 20 35 24 dB dB Isolation (OUTPUT1 to OUTPUT2) ISO 1.0 to 2.5 GHz 4.8 to 6.0 GHz 32 20 36 23 dB dB Return loss RL 1.0 to 2.5 GHz 4.8 to 6.0 GHz 15 15 dB dB P0.1dB compression point P0.1dB 1.0 to 6 GHz +30 dBm Harmonics 2fo fo =2.4 GHz, PIN = +24 dBm, 50 Ω, VCTL = 3.3 V -59 fo = 5.8 GHz, PIN = +21 dBm, 50 Ω, VCTL = 3.3 V -59 fo = 2.4 GHz, PIN = +24 dBm, 50 Ω, VCTL = 3.3 V -40 fo = 5.8 GHz, PIN = +21 dBm, 50 Ω, VCTL = 3.3 V -48 dBm +55 +50 dBm dBm dB dB dB 3fo Input IP3 IP3 -55 dBm -36 dBm dBm PIN = +20 dBm/tone: fo = 2.4 GHz fo = 5.8 GHz +50 +46 Error vector magnitude EVM 802.11g, 54 Mbps, PIN = +25.5 dBm, 2.45 GHz 802.11g, 54 Mbps, PIN = +25.5 dBm, 5.8 GHz 802.11g, 54 Mbps, PIN = +21 dBm, 5.8 GHz -45 -38 -46 Switching speed tSW 50% VCTL to 90% RF 450 550 ns 10%/90% or 90%/10% RF 210 250 ns VCTL = 3.3 V 200 250 μA Rise/fall time Control current ICTL 1 Performance is guaranteed only under the conditions listed in this table. Table 5. SKY13592-689LF Truth Table VCTL1 (Pin 6) VCTL2 (Pin 4) 1 0 Isolation INPUT to OUTPUT1 Path Insertion loss INPUT to OUTPUT2 Path 0 1 Insertion loss Isolation 1 “1” indicates VCTL = 3.0 to 3.6 V. “0” indicates VCTL = 0 to 0.4 V. Any state other than described in this table places the switch into an undefined state. An undefined state will not damage the device. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203513E • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • May 24, 2016 3 DATA SHEET • SKY13592-689LF: 1.0 TO 6.0 GHz SPDT SWITCH Typical Performance Characteristics 0 –10 –0.5 –15 –1.0 –20 Isolation (dB) –1.5 –2.0 –2.5 –3.0 –25 –30 –35 –3.5 –4.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Input to Output2 Input to Output1 –45 –50 6.0 1.0 1.5 2.0 2.5 3.5 4.0 4.5 5.0 5.5 6.0 Figure 4. Typical Isolation (Input–Output) Figure 3. Typical Insertion Loss –10 0 –15 –5 –20 –10 Return Loss (dB) Isolation (dB) 3.0 Frequency (GHz) Frequency (GHz) –25 –30 –35 –40 –15 –20 –25 203513-005 –30 Output1-ON Output2-ON –45 –50 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency (GHz) Figure 5. Typical Isolation (Output1–Output2) 5.5 6.0 –35 Input to Output1, S11 Input to Output2, S11 –40 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency (GHz) Figure 6. Typical Return Loss Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 203513-004 203513-003 –40 Input to Output1 Input to Output2 203513-006 Insertion Loss (dB) (VCTL = 0 V and 3.3 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [Zo] = 50 Ω, Unless Otherwise Noted) May 24, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203513E 5.5 6.0 DATA SHEET • SKY13592-689LF: 1.0 TO 6.0 GHz SPDT SWITCH Evaluation Board Description Package and Handling Information The SKY13592-689LF Evaluation Board is used to test the performance of the SKY13592-689LF SPDT Switch. An Evaluation Board schematic diagram is provided in Figure 7. An assembly drawing for the Evaluation Board is shown in Figure 8. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions The PCB layout footprint for the SKY13592-689LF is provided in Figure 9. Typical part markings are shown in Figure 10. Package dimensions are shown in Figure 11, and tape and reel dimensions are provided in Figure 12. RF Output Port 1 1 2 RF Output Port 2 3 The SKY13592-689LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. OUTPUT1 VCTL1 GND INPUT OUTPUT2 VCTL2 6 5 4 Control Voltage 1 Antenna Control Voltage 2 203513-007 Figure 7. SKY13592-689LF Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203513E • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • May 24, 2016 5 VCTL1 DATA SHEET • SKY13592-689LF: 1.0 TO 6.0 GHz SPDT SWITCH OUTPUT1 INPUT 203513-008 VCTL2 OUTPUT2 C1, C3, C5 = 0 Ω C4 and C6 = DNP Figure 8. SKY13592-689LF Evaluation Board Assembly Diagram 8X 0.65 0.13 0.21 5X 0.33 Pin 1 7X 0.15 0.35 Pitch Part Outline R0.075 Typ 0.10 Exposed Soldering Area All measurements in millimeters 203513-009 Figure 9. SKY13592-689LF PCB Layout Footprint (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 May 24, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203513E DATA SHEET • SKY13592-689LF: 1.0 TO 6.0 GHz SPDT SWITCH Skyworks Part Number Pin 1 Indicator Q/Y Code Lot Code 203513-006 Figure 10. Typical Part Markings (Top View) Seating Plane C 0.50/0.41 1 A R0.075 Typ 0.13 ± 0.1 0.05/0.00 B Pin 1 Indicator Pin 1 3X 0.15 ± 0.05 0.1 ± 0.1 0.2 ± 0.1 0.33 ± 0.1 1 0.35 Pitch 0.05 C 2X 6X 0.10 C 3 0.08 C See Detail A Exposed Pad 0.05 C 2X 0.1 ± 0.1 0.21 ± 0.1 Top View Side View Bottom View 0.175 ± 0.075 R(0.075) 0.15 ± 0.05 Notes: 1. All measurements are in millimeters. 2. Dimensions and tolerances according to ASME Y14.5M-1994. 0.10 M C A B Detail A (5X) 203513-011 Figure 11. SKY13592-689LF Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203513E • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • May 24, 2016 7 DATA SHEET • SKY13592-689LF: 1.0 TO 6.0 GHz SPDT SWITCH 2.00 2.00 ± 0.05 (See Note 3) ∅1.50 +0.1/–0 Pin 1 Indicator 8.0 +0.3/–0.1 ∅0.50 Min 0.25 ± 0.05 B 4.00 (See Note 1) R 0.10 Max B 1.75 ± 0.10 A 3.50 ± 0.05 (See Note 3) 5° Max 1.20 ± 0.05 (Bo) 0.65 ± 0.05 (Ko) Section A A R 0.1 Typ 1.20 ± 0.05 (Ao) Notes: 1. 2. 3. 4. 5. 6. 7. 10-sprocket hole pitch cumulative tolerance ±0.2 mm. Chamber in compliance with EIA 481. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. Ao and Bo are measured from a plane at a distance “R” above the bottom of the pocket. Carrier tape: black conductive polycarbonate. Cover tape material: transparent conductive PSA. All measurements are in millimeters. R 0.25 Max. 0 ± 0.04 Bridge Height Section B 203513-012 Figure 12. SKY13592-689LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 May 24, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203513E DATA SHEET • SKY13592-689LF: 1.0 TO 6.0 GHz SPDT SWITCH Ordering Information Model Name SKY13592-689LF: 1.0 to 6.0 GHz SPDT Switch Manufacturing Part Number SKY13592-689LF Evaluation Board Part Number SKY13592-689LF-EVB Copyright © 2015-2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203513E • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • May 24, 2016 9