Beverly Microwave Division 150 Sohier Road • Beverly, MA 01915 Phone: +1(978) 922-6004 • Email: [email protected] www.cpii.com/bmd X- Band Coaxial Pulsed Magnetron VMX3095 Features: • 9.3 GHz • Tunable +/- 20 MHz • 1.50 MW peak output power • 1.50 kW average output power • .001 duty cycle • Liquid cooled anode Benefits: • High power • Long life A magnetron is a high power microwave oscillator in which the potential energy of an electron cloud near the cathode is converted into RF energy in a series of cavity resonators. The VMX3095 magnetron delivers high peak and average RF power for use in medical or industrial applications. Applications: • Medical linear accelerator • Industrial linear accelerator The VMX3095 will mount directly into new and existing sockets and can be operated under various pulse and input conditions to accommodate wide ranging operating requirements. In addition to high power, the VMX3095 provides excellent frequency stability, low jitter and long life. •• Solid Power Amplifiers Amplifiers• •Integrated IntegratedMicrowave Microwave Assemblies Solid State State Power Assemblies ••Receiver ControlComponents Components• •Transmitters Transmitters • Amplifiers Receiver Protectors Protectors •• Control • Amplifiers •• Modulators Magnetrons• •Crossed CrossedField FieldAmplifiers Amplifiers Modulators •• Magnetrons • Ring Loop Loop Traveling TravelingWave WaveTubes Tubes• •Power PowerCouplers Couplers Beverly Microwave Division VMX3095 Coaxial Pulsed Magnetron Electrical Specifications Frequency Peak Power Output Average Power Output Pulse Voltage Peak Anode Current Average Anode Current Pulse Width Duty Cycle 9.3 GHz ± 20MHz 1.50 MW 1.50 kW Body Temperature 80 A Mounting Position 80 mA 4.5 µS, ± 0.5 µS 0.001 10 V Maximum Filament Current 15 A Maximum Load VSWR Flow Rate (operating) 34 - 37 kV Maximum Filament Voltage Minimum Warm-Up Time Cooling Mechanical and Environmental Specifications Support Coupling Liquid on body, forced air on cathode 0.66 gal/min 16 cfm to cathode 10°C to 60°C Any Mounting Flange WR112 mates with UG-51/U Tuning Maximum Weight 10 turns 40 lbs. 300 S 1.1:1 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products visit our webpage at www.cpii.com/bmd, or contact: CPI Beverly Microwave Division, Telephone: +1 (978) 922-6000 • FAX: +1 (978) 922-8914 • Email: [email protected] Rev. 11/15