PART NO. 10E1C2.75 15E1C2.75 20E1C2.75 25E1C2.75 30E1C2.75 40E1C2.75 50E1C2.75 65E1C2.75 80E1C2.75 100E1C2.75 125E1C2.75 125E2C2.75 150E1C2.75 150E2C2.75 200E1C2.75 200E2C2.75 250E2C2.75 300E2C2.75 350E2C2.75 400E2C2.75 450E2C2.75 TYPE 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 2 2 2 2 2 2 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY 276.23 [10.88] REF TYPE 1 76.20 [3.00] REF TYPE 2 162.05 [6.38] REF DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. STRIKER FUSE CP MATL SPEC FINISH DRW DATE SCALE MYORK 2/18/2014 NTS C FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 10E THRU 450E 2.75KV OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. SHEET 1 OF 1 OL-ERATEDC2.75 PART NO. 10E1C5.5 15E1C5.5 20E1C5.5 25E1C5.5 30E1C5.5 40E1C5.5 50E1C5.5 65E1C5.5 80E1C5.5 100E1C5.5 125E1C5.5 125E2C5.5 150E1C5.5 150E2C5.5 175E1C5.5 175E2C5.5 200E1C5.5 200E2C5.5 250E2C5.5 300E2C5.5 350E2C5.5 400E2C5.5 450E2C5.5 500E3C5.5 550E3C5.5 600E3C5.5 TYPE 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 2 1 2 2 2 2 2 2 3 3 3 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY 403.23 [15.875] REF TYPE 1 76.20 [3.000] REF 162.05 [6.380] REF TYPE 2 STRIKER FUSE 247.90 [9.760] REF TYPE 3 DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP STRIKER FUSE MATL SPEC FINISH DRW DATE SCALE MYORK 2/18/2014 NTS D FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 10E THRU 600E 5.5KV OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. SHEET 1 OF 1 OL-ERATEDC5.5 PART NO. 5NLE10E 5NLE15E 5NLE20E 5NLE25E 5NLE30E 5NLE40E 5NLE50E 5NLE65E 5NLE80E 5NLE100E 5NLE125E 5NLE150E 5NLE175E 5NLE200E 5NLE2225E 5NLE2250E 5NLE2300E 5NLE2350E 5NLE2400E 5NLE2450E TYPE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY 454.03 [17.875] REF TYPE 1 76.20 [3.000] REF 162.05 [6.380] REF TYPE 2 STRIKER FUSE DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP MATL SPEC FINISH DRW DATE SCALE MYORK 2/18/2014 NTS C FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 10E THRU 450E 5.5KV OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. OL-5NLE SHEET 1 OF 1 PART NO. 50E1C5.5W 65E1C5.5W 150E1C5.5W 400E2C5.5W TYPE 1 1 1 2 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY 8.71 [0.343] REF TYPE 1 76.20 [3.000] REF 403.23 [15.875] REF TYPE 2 162.05 [6.380] REF STRIKER FUSE DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP MATL SPEC FINISH DRW DATE SCALE MYORK 2/18/2014 NTS C FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 50E THRU 400E 5.5KV W/ HOOKEYE OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. SHEET 1 OF 1 OL-ERATEDC5.5W PART NO. 10E1C8.25 15E1C8.25 20E1C8.25 25E1C8.25 30E1C8.25 40E1C8.25 50E1C8.25 65E1C8.25 80E1C8.25 100E1C8.25 125E1C8.25 125E2C8.25 150E1C8.25 150E2C8.25 200E2C8.25 250E2C8.25 300E2C8.25 350E3C8.25 400E3C8.25 TYPE 1 1 1 1 1 1 1 1 1 1 1 2 1 2 2 2 2 3 3 REV A REVISION DESCRIPTION 510492ECP - RELEASE DATE 5/28/2014 MRY 403.23 [15.875] REF TYPE 1 76.20 [3.000] REF 162.05 [6.380] REF TYPE 2 STRIKER FUSE 247.90 [9.760] REF TYPE 3 DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP STRIKER FUSE MATL SPEC FINISH DRW DATE SCALE MYORK 2/19/2014 NTS D FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 10E THRU 400E 8.25KV OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. SHEET 1 OF 1 OL-ERATEDC8.25 PART NO. 8NLE10E 8NLE15E 8NLE20E 8NLE25E 8NLE30E 8NLE40E 8NLE50E 8NLE65E 8NLE80E 8NLE100E 8NLE2100E 8NLE2125E 8NLE150E 8NLE2150E 8NLE2200E 8NLE2250E TYPE 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2 2 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY 454.03 [17.875] REF TYPE 1 76.20 [3.000] REF 162.05 [6.380] REF TYPE 2 STRIKER FUSE DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP MATL SPEC FINISH DRW DATE SCALE MYORK 2/19/2014 NTS C FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 10E THRU 250E 8.25KV OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. OL-8NLE SHEET 1 OF 1 PART NO. 10E1C15.5 15E1C15.5 20E1C15.5 25E1C15.5 30E1C15.5 40E1C15.5 50E1C15.5 65E1C15.5 65E2C15.5 80E1C15.5 80E2C15.5 100E1C15.5 100E2C15.5 125E2C15.5 150E2C15.5 175E2C15.5 200E2C15.5 200E3C15.5 250E3C15.5 300E3C15.5 TYPE 1 1 1 1 1 1 1 1 2 1 2 1 2 2 2 2 2 3 3 3 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY 479.43 [18.875] REF TYPE 1 76.20 [3.000] REF 162.05 [6.380] REF TYPE 2 STRIKER FUSE TYPE 3 247.90 [9.760] REF DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP STRIKER FUSE MATL SPEC FINISH DRW DATE SCALE MYORK 2/18/2014 NTS D FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 10E THRU 300E 15.5KV OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. SHEET 1 OF 1 OL-ERATEDC15.5 PART NO. 15GSE65E 15GSE80E 15GSE100E 15GSE2125E 15GSE2150E 15GSE2175E 15GSE2200E 15GSE3250E 15GSE3300E TYPE 1 1 1 2 2 2 2 3 3 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY 555.63 [21.875] REF TYPE 1 76.20 [3.000] REF 162.05 [6.380] REF TYPE 2 STRIKER FUSE TYPE 3 247.90 [9.760] REF DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP STRIKER FUSE MATL SPEC FINISH DRW DATE SCALE MYORK 2/18/2014 NTS D FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 65E THRU 300E 15.5KV OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. OL-15GSE SHEET 1 OF 1 PART NO. 15NLE10E 15NLE15E 15NLE20E 15NLE25E 15NLE30E 15NLE40E 15NLE50E 15NLE65E 15NLE80E 15NLE280E 15NLE100E 15NLE2100E 15NLE2125E 15NLE2150E 15NLE3150E 15NLE2175E 15NLE3175E 15NLE2200E 15NLE3250E 15NLE3300E TYPE 1 1 1 1 1 1 1 1 1 2 1 2 2 2 3 2 3 2 3 3 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY 606.43 [23.875] REF TYPE 1 76.20 [3.000] REF 162.05 [6.380] REF TYPE 2 STRIKER FUSE TYPE 3 247.90 [9.760] REF DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP STRIKER FUSE MATL SPEC FINISH DRW DATE SCALE MYORK 2/18/2014 NTS D FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 10E THRU 300E 15.5KV OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. OL-15NLE SHEET 1 OF 1 PART NO. 15E1C25.8 20E1C25.8 25E1C25.8 30E1C25.8 40E1C25.8 50E1C25.8 65E2C25.8 80E2C25.8 100E2C25.8 TYPE 1 1 1 1 1 1 2 2 2 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY 631.83 [24.875] REF TYPE 1 76.20 [3.000] REF TYPE 2 162.05 [6.380] REF STRIKER FUSE DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP MATL SPEC FINISH DRW DATE SCALE MYORK 2/19/2014 NTS D FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 15E THRU 100E 25.8KV OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. SHEET 1 OF 1 OL-ERATEDC25.8 PART NO. 3E1C38.0 7E1C38.0 10E1C38.0 15E1C38.0 20E1C38.0 25E1C38.0 30E1C38.0 40E1C38.0 50E2C38.0 65E2C38.0 80E2C38.0 TYPE 1 1 1 1 1 1 1 1 2 2 2 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY 784.23 [30.875] REF TYPE 1 76.20 [3.000] REF TYPE 2 162.05 [6.380] REF STRIKER FUSE DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP MATL SPEC FINISH DRW DATE SCALE MYORK 2/19/2014 NTS D FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 3E THRU 80E 38.0KV OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. SHEET 1 OF 1 OL-ERATEDC38.0 PART NO. 10E1CL5.5 15E1CL5.5 20E1CL5.5 25E1CL5.5 30E1CL5.5 40E1CL5.5 50E1CL5.5 65E1CL5.5 80E1CL5.5 100E1CL5.5 125E1CL5.5 150E1CL5.5 225E2CL5.5 250E2CL5.5 300E2CL5.5 350E2CL5.5 400E2CL5.5 450E2CL5.5 500E3CL5.5 550E3CL5.5 600E3CL5.5 TYPE 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 3 3 LENGTH 14.875 14.875 14.875 14.875 14.875 14.875 14.875 14.875 14.875 14.875 14.875 14.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY SEE CHART REF TYPE 1 76.20 [3.000] REF TYPE 2 162.05 [6.380] REF STRIKER FUSE TYPE 3 247.90 [9.760] REF DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP MATL SPEC STRIKER FUSE FINISH DRW DATE SCALE MYORK 2/18/2014 NTS D FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 10E THRU 600E 5.5KV W/ CLIP LOCK OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. SHEET 1 OF 1 OL-ERATEDCL5.5 PART NO. 10E1CL8.25 15E1CL8.25 20E1CL8.25 25E1CL8.25 30E1CL8.25 40E1CL8.25 50E1CL8.25 65E1CL8.25 80E1CL8.25 100E1CL8.25 125E2CL8.25 150E2CL8.25 175E2CL8.25 200E2CL8.25 250E2CL8.25 300E2CL8.25 350E3CL8.25 TYPE 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 3 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY 403.23 [15.875] REF TYPE 1 76.20 [3.000] REF TYPE 2 162.05 [6.380] REF STRIKER FUSE TYPE 3 247.90 [9.760] REF DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP MATL SPEC STRIKER FUSE FINISH DRW DATE SCALE MYORK 2/19/2014 NTS D FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 10E THRU 350E 8.25KV W/ CLIP LOCK OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. SHEET 1 OF 1 OL-ERATEDCL8.25 PART NO. 10E1CL15.5 15E1CL15.5 20E1CL15.5 25E1CL15.5 30E1CL15.5 40E1CL15.5 50E1CL15.5 65E1CL15.5 80E1CL15.5 100E1CL15.5 125E2CL15.5 150E2CL15.5 150E3CL15.5 175E2CL15.5 200E2CL15.5 200E3CL15.5 250E3CL15.5 300E3CL15.5 TYPE 1 1 1 1 1 1 1 1 1 1 2 2 3 2 2 3 3 3 LENGTH 17.875 17.875 17.875 17.875 17.875 17.875 17.875 20.875 20.875 20.875 20.875 20.875 20.875 20.875 20.875 20.875 20.875 20.875 REV A REVISION DESCRIPTION 510492GCP - RELEASE DATE 5/28/2014 MRY SEE CHART REF TYPE 1 76.20 [3.000] REF TYPE 2 162.05 [6.380] REF STRIKER FUSE TYPE 3 247.90 [9.760] REF DENOTES CRITICAL CHARACTERISTICS. DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE CPK DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT AND TRACKING TO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS. DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE. CP MATL SPEC STRIKER FUSE FINISH DRW DATE SCALE MYORK 2/18/2014 NTS D FINISH GOOD WT GRAMS/PIECE UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994 3RD ANGLE PROJECTION TITLE 10E THRU 300E 15.5KV W/ CLIP LOCK OUTLINE Littelfuse CHICAGO, ILLINOIS 60631 REVISION A DRWG NO. SHEET 1 OF 1 OL-ERATEDCL15.5