This document is a declaration of the substances within the manufacturer listed item. Note: if the item is an assembly with lower level parts, the declaration encompasses all lower level materials for which the manufacturer has © Copyright 2005. IPC, Bannockburn, Illinois. All rights reserved under engineering responsibility. both international and Pan-American copyright conventions. Adobe Reader version 7.0.5 is required to complete this declaration. Material Composition Declaration 1752-2 IPC Web Site for Information on IPC-1752 Standard http://www.ipc.org/IPC-175x 1.1 Form Type * Distribute Declaration Class * Class 6 - RoHS Yes/No, Homogeneous Materials and Mfg Informat Supplier Information Company Name * Company Unique ID AVX CORPORATION(KYOCER05-889-5921 Contact Name * Title - Contact Unique ID Authority Response Date * Dun & Bradstreet Phone - Contact * 2010-04-26 Email - Contact * Dennis Oldland Corporate Manager-Environrme+1 843-946-0241 Authorized Representative * Title - Representative Phone - Representative * Toshihiko Koyanagi Requester Item Number Response Document ID [email protected] Email - Representative * Duplicate Supplier Comments or URL for Additional Information Manager (+81)266-27-2276 loc564 [email protected] Mfr Item Number Mfr Item Name Effective Date KC2520 TCXO 2010-04-26 Alternate Recommendation Version Contact -> Authorized Representative Manufacturing Site Weight * UOM Unit Type Nagano Okaya Plant 15.03779 mg Each Alternate Item Comments Manufacturing Process Information Terminal Plating / Grid Array Material Nickel/Gold (Ni/Au) - electrolytic Terminal Base Alloy Other J-STD-020 MSL Rating 1 Peak Process Body Temperature Max Time at Peak Temperature Number of Reflow Cycles 260 C 10 seconds 2 Comments * Required Field CAS Registry Number(R) is a Registered Trademark of the American Chemical Society Form enabled by Adobe Save the fields in this form to a file Export Data Import fields from a file into this form Import Data Clear all of the fields on this form Reset Form Lock the fields on this form to prevent changes RoHS Material Composition Declaration Declaration Type * Lock Supplier Fields Custom RoHS Directive RoHS Definition: Quantity limit of 0.1% by mass (1000 PPM) in homogeneous material for: Lead (Pb), Mercury, Hexavalent Chromium, Polybrominated Biphenyls (PBB), 2002/95/EC Polybrominated Diphenyl Ethers (PBDE) and quantity limit of 0.01% by mass (100 PPM) of homogeneous material for Cadmium All part numbers covered by this form comply with the current revision, in effect as of the date this form was signed, of Seagate's Product Stewardship Requirements.All part numbers listed in or referred to by this form comply with the hazardous substance restrictions of the European Union Restriction on Hazardous Substances (RoHS) Directive. Supplier certifies that it gathered the information it provides in this form concerning RoHS restrictive substances using appropriate methods to ensure its accuracy and that such information is true and correct to the best of its knowledge and belief, as of the date that Supplier completes this form. Supplier acknowledges that Company will rely on this certification in determining the compliance of its products with European Union member state laws that implement the RoHS Directive. Company acknowledges that Supplier may have relied on information provided by others in completing this form, and that Supplier may not have independently verified such information. However, in situations where Supplier has not independently verified information provided by others, Supplier agrees that, at a minimum, its suppliers have provided certifications regarding their contributions to the part, and those certifications are at least as comprehensive as the certification in this paragraph.If the Company and the Supplier enter into a written agreement with respect to the identified part, the terms and conditions of that agreement, including any warranty rights and/or remedies provided as a part of the agreement, will be the sole and exclusive source of the Supplier’s liability and the Company’s remedies for issues that arise regarding information the Supplier provides in this form. (2002/95/EC; see http://europa.eu.int/eur-lex/pri/en/oj/dat/2003/l_037/l_03720030213en0019002 3.pdf). Supplier Acceptance * Accepted RoHS Declaration * 1 - Item(s) does not contain RoHS restricted substances per the definition above Exemptions: If the declared item does not contain RoHS restricted substances per the definition above except for defined RoHS exemptions, then select the corresponding response in the RoHS Declaration above and choose all applicable exemptions. Declaration Signature Instructions: Complete all of the required fields on all pages of this form. Select the "Accepted" on the Supplier Acceptance drop-down. This will display the signature area. Digitally sign the declaration (if required by the Requester) and click on Submit Form to have the form returned to the Requester. Supplier Digital Signature Dennis Oldland * Required Field Digitally signed by Dennis Oldland DN: cn=Dennis Oldland, o=AVX Corporation, ou=Corporate EHS, [email protected], c=US Date: 2010.04.26 08:59:08 -04'00' CAS Registry Number(R) is a Registered Trademark of the American Chemical Society Form enabled by Adobe Homogeneous Material Composition Declaration for Electronic Products SubItem Instructions: The presence of any JIG Level A or B substances must be declared. [1] indicate the subpart in which the substance is located, [2] provide a description of the homogeneous material [3], enter the weight of the homogeneous material. Substance Instructions: [A] select the Level (JIG A, JIG B, Requester or Supplier) [B] select the substance category (JIG or Requester) or enter a value (Supplier). [C] select the substance (JIG) or enter the substance and CAS (Other). [D] select a RoHS exemption, if applicable [E] enter the weight of the substance or the PPM concentration [F] Optionally enter the positive (+) and negative (-) tolerance in percent (Note: percent tolerance values are expected to cover a 3 sigma range of distribution unless otherwise noted). Line Functions: +I Inserts a New Item /SubItem +M Inserts a new Material Item/SubItem Name Homogeneous Material Weight +I -I Alumina Case,no m +M -M Porcelain(LABRE8.055 +M -M Seal Ring(LABRE1.748 +M -M Metallized(LABR 2.002 Unit of Measure mg mg mg Level +C Inserts a new Substance Category Substance Category +S Inserts a new Substance Substance CAS - Deletes the element line Exempt Weight Unit of Tolerance PPM Measure + +C -C Supplier Alumina +S -S Aluminium oxide 1344-28-1 7.3755 mg +C -C Supplier Silicon +S -S Silicon deoxide 14808-60-7 0.365 mg +C -C Supplier Calcium +S -S Calcium oxide 1305-78-8 0.0629 mg +C -C Supplier Magnesium +S -S Magnesium oxide 1309-48-4 0.0503 mg +C -C Supplier Chromium +S -S Chromium(III) oxide 1308-38-9 0.0629 mg +C -C Supplier Molybdenum +S -S Molybdenum 7439-98-7 0.1384 mg +C -C Supplier Iron +S -S Iron 7439-89-6 0.944 mg +C -C B Nickel (external applic +S -S Nickel 7440-02-0 0.4644 mg +C -C Supplier Cobalt +S -S Cobalt 7440-48-4 0.3396 mg +C -C Supplier Tungsten +S -S Tungsten 7440-33-7 1.939 mg +C -C B Nickel (external applic +S -S Nickel 7440-02-0 0.063 mg +M -M Plating(Ni)(LABR0.177 mg +C -C B Nickel (external applic +S -S Nickel 7440-02-0 0.177 mg +M -M Plating(Au)(LABR0.151 mg +C -C Supplier Gold +S -S Gold 7440-57-5 0.151 mg +M -M Brazing(LABREP0.4531 mg +C -C Supplier Silver +S -S Silver 7440-22-4 0.3776 mg +C -C Supplier Copper +S -S Copper 7440-50-8 0.0755 mg +C -C Supplier Gold +S -S Gold 7440-57-5 0.001814mg +C -C Supplier Chromium +S -S Chromium 7440-47-3 0.000345mg +I -I Crystal,no marking +M -M Crystal(LABREP 0.2582 mg +C -C Supplier Silicon +S -S Silicon deoxide 14808-60-7 0.2582 mg +I -I Conductive paste,n +M -M Conductive past 0.0156 mg +C -C Supplier Silver +S -S Silver 7440-22-4 0.0116 mg +C -C Supplier Silicon +S -S Silicon 7440-21-3 0.004 mg +C -C Supplier Iron +S -S Iron 7439-89-6 0.999293mg +C -C B Nickel (external applic +S -S Nickel 7440-02-0 0.5449 mg +C -C Supplier Cobalt 7440-48-4 0.3194 mg +I -I Electrode,no markin+M -M Electrode(LABRE0.002159mg +I -I Cap,laser +M -M Kovar(LABREPO1.879 * Required Field mg +S -S Cobalt CAS Registry Number(R) is a Registered Trademark of the American Chemical Society Form enabled by Adobe +I -I IC,no marking +C -C Supplier Manganese +S -S Manganese 7439-96-5 0.009394mg +C -C Supplier Silicon +S -S Silicon 7440-21-3 0.005637mg +C -C Supplier Carbon +S -S Carbon 1333-86-4 0.000375mg +M -M Plating(Ni)(LABR0.1084 mg +C -C B Nickel (external applic +S -S Nickel 7440-02-0 0.1084 +M -M IC(LABREPORT_0.1607 mg +C -C Supplier Silicon +S -S Silicon 7440-21-3 0.159894mg +C -C Supplier Alumina +S -S Alumina 7429-90-5 0.000473mg +C -C Supplier Thallium +S -S Thallium 25583-20-4 0.000214mg +C -C Supplier Molybdenum +S -S Molybdenum 7439-98-7 0.000082mg +C -C Supplier Thallium +S -S Thallium 7440-32-6 0.000023mg +C -C Supplier Copper +S -S Copper 7440-50-8 0.000008mg +C -C B Arsenic/Arsenic Comp +S -S Arsenic 7440-38-2 0.000002mg +C -C Supplier Chromium +S -S Chromium 7440-47-3 0.000000mg +C -C Supplier Gold +S -S Gold 7440-57-5 0.02735 mg +C -C Supplier Palladium +S -S Palladium 7440-05-3 0.00028 mg +I -I Au Bump,no markin+M -M Au Bump(LABRE0.02763 mg * Required Field CAS Registry Number(R) is a Registered Trademark of the American Chemical Society mg Form enabled by Adobe