Model # BXHF1075 High Frequency MMW Amplifier Frequency Range: 43-44 GHz Features • Millimeter Wave Operation • Laser Sealed Housing • Internal Voltage Regulation • Dual Stage Amplifier The Model BXHF1075 is standard high frequency amplifier covering 43 GHz to 44 GHz. This two stage design, utilizes a laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version as a model SXHF1075. All specification ratings are based on measurements in a 50 ohm system with a DC supply voltage tolerance of +/- 2%. Technical Specifications Maximum (No Damage) Ratings Parameter Parameter Unit Typical Min/Max Frequency Range GHz 43 - 44 43 - 44 Storage Temperature -55°C to +85°C Gain dB 31 28 Min. Operating Temperature -40°C to +85°C Gain Flatness dB +/- 1.0 +/- 2.0 Max. Noise Figure dB 5.0 5.5 Max. Output Power @ 1 dB Compression dBm +17 +15 Min. Output 3rd Order Intercept dBm +27 -- Output 2nd Order Intercept dBm +37 -- Reverse Isolation dB Input VSWR --- 2.0:1 2.2:1 Max. Output VSWR --- 2.0:1 2.2:1 Max. Supply Voltage volts +12 to +15 +12 to +15 Supply Current mA 300 325 Unit DC Voltage @ 25°C +18 volts Input Drive @ 25°C (CW) -5 dBm * Typical values are measured at 25°C, but not guaranteed. Mechanical & Electrical Parameter Specification Housing Size 1.500” L x 1.060” W x 0.300” H Housing Drawing HF2 RF Connectors 2.4 mm Female Replaceable Connectors Rev Date: 5/6/2014 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1075 Package Outline Drawing Rev Date: 5/6/2014 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]