QBH 108

Model # QBH-108
Available as:
QBH-108, 4 Pin TO-8 (T4)
QBH-9-108, SMA Connectorized Laser Seal Housing (H1L)
RF/Microwave Amplifier
Features
• Unconditionally Stable
• Wide 5 to 300 MHz Bandwidth
• Environmental Screening Available
Technical Specifications
Typical* Intermodulation
Performance at 25 ºC
Characteristic
TYPICAL
Ta = +25 ºC
MIN/MAX
Ta = -55ºC to +85 ºC
Frequency
5 to 300 MHz
5 to 300 MHz
11
9 Min.
+/- 0.6
---
Power @ 1 dB Comp. (dBm)
+22
+19 Min.
Reverse Isolation (dB)
30
---
In
1.4:1
1.5:1 Max.
Out
1.4:1
1.5:1 Max.
Absolute Maximum
(No Damage) Ratings
Noise Figure (dB)
6.0
7.5 Max.
Operating Temperature
-55ºC to +100 ºC
Power
+15
+15
Storage Temperature
-62ºC to +125ºC
Case Temperature
+125 ºC
DC Voltage
+18 volts
Continuous
RF Input Power
+13 dBm
Short Term
RF Input Power
200 Milliwatts
(1 Minute Max.)
Maximum Peak Power
0.5 Watt
(3 µsec Max.)
Gain (dB)
Gain Flatness (dB) P-P
VSWR
Vdc
Second Order Harmonic
Intercept Point:
+56 dBm (Typ.)
Second Order Two Tone
Intercept Point:
+52 dBm (Typ.)
Third Order Two Tone
Intercept Point:
+37 dBm (Typ.)
*Note: Measured at Midband.
mAmeasured at 25°C, but not guaranteed.
70
75 Max.
*Typical values are
Note: Care should always be taken to effectively ground the case of each unit.
(Packages below are for reference only)
Grounding Instructions
Care should be taken to effectively ground each unit.
Revisions
API reserves the right to make revisions to both product and/or the information contained within their
datasheets without advanced notice.
Min./Max. Values
Specifications are guaranteed when tested in a 50 Ω (ohm) system.
Typical performance graphs and values are measured at 25°C, but not guaranteed.
Rev Date: 5/16/2014
© API Technologies Corp. Proprietary Information
Page # 1
|
www.apitech.com
|
micro.apitech.com
|
+1.888.553.7531
|
[email protected]