RF AMPLIFIER MODEL BXMP1026 Medium Power Amplifier Available As: BXMP1026, SMA Connectorized Housing Features Typical Intermodulation Performance at 25 ºC High Power Output: Greater Than 2 Watts High Third Order Intercept: +43 dBm Typical Unconditionally Stable Second Order Harmonic Intercept Point ..... +66 dBm (Typ.) Second Order Two Tone Intercept Point ....... +63 dBm (Typ.) Third Order Two Tone Intercept Point. .......... +43 dBm (Typ.) Specifications CHARACTERISTIC Frequency (MHz) TYPICAL Ta= 25 ºC 50 - 250 MHz Gain (dB) Power @ 1 dB* Comp. (dBm) Reverse Isolation (dB) VSWR In Out Noise Figure (dB) Power Vdc mA K Factor Maximum (No Damage) Ratings MIN/MAX Ta = 0 ºC to +60 ºC 50 - 250 MHz 31.0 29.0 Min. 33.5 33 Min. -38 1.8:1 1.8:1 --2:0:1 Max. 2:0:1 Max. 3.5 4.5 Max. +15 660 +15 700 Max. >1.0 >1.0 Ambient Operating Temperature ................. -30ºC to +85 ºC Storage Temperature ................................. -62ºC to +125 ºC Case Temperature .................................................. +150 ºC DC Voltage .......................................................... +18 Volts Continuous RF Input Power .................................. +13 dBm Short Term RF Input Power ...... 50 Milliwatts (1 Minute Max.) Maximum Peak Power .................... 0.5 Watt (3 μsec Max.) Note: Care should always be taken to effectively ground the case of each unit. Revision: 3/7/2016 ECN: Addition of K Factor Testing Input Power CW: +13 dBm *Power Output @1 dB Comp: +32 dBm above 200 MHz Typical Performance Data Gain (dB) 32 Reverse Isolation (dB) 0 -10 31 Noise Figure 5 4 30 - 20 3 29 28 - 30 2 1 - 40 Start 50 MHz Stop 250 MHz Start 50 MHz 1 dB Comp. (dBm) 35 Stop 250 MHz Start 50 MHz Input VSWR Stop 250 MHz Output VSWR 2.0 2.0 1.5 1.5 34 33 32 31 1.0 Start 50 MHz Stop 250 MHz 1.0 Start 50 MHz Legend Stop 250 MHz +25 ºC __ __ __ Start 50 MHz Stop 250 MHz +60ºC - - - - - - 0 ºC Linear S-Parameters Freq. MHz ----S11---Mag Deg ----S21---Mag Deg ----S12---Mag Deg ----S22---Mag Deg ====================================================================================== 30 50 .21 31.97 -43 .0098 147 129 .13 -38 70 .20 31.53 -65 .0092 134 116 .09 -47 90 .20 31.30 -85 .0094 113 94 .04 -58 110 .20 31.19 -106 .0100 92 -51 .02 -68 130 .19 30.95 -216 .0095 81 -91 .07 -77 150 .18 30.85 -147 .0097 59 -109 .12 -85 170 .17 30.80 -167 .0097 40 -125 .16 -90 190 .16 30.84 173 .0108 36 -142 .19 -94 210 .16 31.07 153 .0100 4 -160 .20 -98 230 .18 31.39 132 .0113 -4 179 .20 250 .21 -106 31.94 110 .0105 -28 152 .17 Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH (215) 464-4000 · Fax (215) 464-4001 Model # BXMP1026 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Outline Drawing (BXMP1026) (For reference only) Rev Date: 2/22/2016 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]