Schottky Barrier Rectifier MBR20150CT 2x 10A, 150V, TO-220AB Common Cathode MBR20150CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features • H igh junction temperature capability Pin out Heat sink • G uard ring for enhanced ruggedness and long term reliability Heat sink Common Cathode Common Cathode • High frequency operation • C ommon cathode configuration in TO-220AB package • Low forward voltage drop Applications 1 3 Anode 1 2 3 1 Anode Common Anode Cathode Anode Pinout 1 D2-PAK & D-PAK Common Cathode Symbol Heat sink Peak Inverse Voltage Cathode Common Cathode Anode 1 2 Average Forward Current 3 Cathode • DC/DC converters • Polarity protection diodes diodes Pinout 3 ITO-220AB Common Cathode Maximum Ratings Maximum RMS Voltage • Switching mode power 3 supply Anode Common Anode Cathode • Free-wheeling Pinout 2 TO-220AB Common Cathode Parameters 2 Test Conditions Max Cathode VRWM - 150 V VRMS - 105 V IF(AV) 50% duty cycle @TC = 125°C, rectangular wave form 20(Per device) - 1.0 A 8.3 ms, half Sine pulse 150 A Anode PinoutPeak 4 Repetitive Surge current 1 IRRM2 (Rated VR , Square Wave,20KHz) ITO-220AB Common PeakAnode One Cycle Non-Repetitive Surge Pinout 5 TO-220ACIFSM Current (per leg) 10(Per leg) Unit A Electrical Characteristics Parameters Forward Voltage Drop (per leg) * Reverse Current (per leg) * Symbol Test Conditions Max VF1 @10A, Pulse, TJ = 25 °C 0.90 VF2 @10A, Pulse, TJ = 125 °C 0.83 IR1 @VR = rated VR TJ = 25 °C Unit V 0.50 Max 0.01 Typ mA IR2 @VR = rated VR TJ = 125 °C 5.0 Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 400 pF Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH 10,000 V/μs Voltage Rate of Change * Pulse Width < 300μs, Duty Cycle <2% dv/dt ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:01/19/16 Schottky Barrier Rectifier MBR20150CT 2x 10A, 150V, TO-220AB Common Cathode Thermal-Mechanical Specifications Parameters Symbol Max Unit Junction Temperature TJ Test Conditions -55 to +175 °C -55 to +150 °C Storage Temperature Tstg Maximum Thermal Resistance Junction to Case(per leg) RthJC DC operation 1.5 °C/W Maximum Thermal Resistance, Case to Heat Sink RthCS Mounting surface, smooth and greased(only for TO-220) 0.5 °C/W Approximate Weight wt 2 g Case Style TO-220AB Figure 1: Typical Forward Characteristics Figure 2: Typical Reverse Characteristics ºC ºC ºC ºC Figure 3: Typical Junction Capacitance ºC ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:01/19/16 Schottky Barrier Rectifier MBR20150CT 2x 10A, 150V, TO-220AB Common Cathode Dimensions- TO-220AB Millimeters Symbol Min Max A 3.56 4.83 A1 0.51 1.40 A2 2.03 2.92 b 0.38 1.02 b1 1.14 1.78 c 0.31* 0.61 D 14.22 16.51 D1 8.38 9.15* E 9.65 10.67 e 2.54 - e1 4.98* - H1 5.84 6.86 L 12.70 14.73 L1 - 6.35 øP 3.53 4.09 Q 2.54 3.43 Footnote *: The spec. does not comply with JEDEC spec. Packing Options Part Numbering and Marking System Part Number Marking Packing Mode M.O.Q MBR20150CT MBR20150CT 50pcs / Tube 1000 Tube Specification 7mm 530mm MBR20150CT 6 LF YYWWL MBR 20 150 CT LF YY WW L = Device Type = Forward Current (20A) = Reverse Voltage (150V) = Configuration = Littelfuse = Year = Week = Lot Number 32mm ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:01/19/16