Schottky Barrier Rectifier MBRD10100CT 2x 5A, 100V, TO-252 Common Cathode MBRD10100CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features Pin out Heat sink • H igh junction temperature capability Heat sink Common Cathode Common Cathode • H igh frequency operation • C ommon cathode configuration in compact surface mount TO-252 package • G uard ring for enhanced ruggedness and long term reliability • Low forward voltage drop 1 3 Anode Anode Pinout 1 D2-PAK & D-PAK Common Cathode 1 3 2 Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode 1 2 3 Applications Anode Common Anode Cathode • S witching mode power supply • DC/DC converters • Polarity protection diodes Pinout diodes 3 • F ree-wheeling ITO-220AB Common Cathode Maximum Ratings Parameters Heat sink Test Conditions Cathode Symbol Peak Inverse Voltage Cathode Common Cathode Anode Average Forward Current 1 2 3 Peak One Cycle Non-Repetitive Pinout 4Surge Current (per leg) ITO-220AB Common Anode Max Unit V VRWM - 100 IF(AV) 50% duty cycle @TC = 105°C, rectangular wave form 5 (per leg) 10 (total device) 2 8.3ms,half Sine pulse 120 IFSM Cathode 1 Anode A A Pinout 5 TO-220AC Electrical Characteristics Parameters Forward Voltage Drop (per leg) * Reverse Current (per leg) * Symbol Test Conditions Max VF1 @ 5A, Pulse, TJ = 25 °C 0.85 VF2 @ 5A, Pulse, TJ = 125 °C 0.75 IR1 @VR = rated VR TJ = 25 °C 1.0 IR2 @VR = rated VR TJ = 125 °C 15 Unit V mA Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 300 pF Typical Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH 10,000 V/μs Voltage Rate of Change * Pulse Width < 300μs, Duty Cycle <2% dv/dt ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRD10100CT 2x 5A, 100V, TO-252 Common Cathode Thermal-Mechanical Specifications Parameters Symbol Max Unit Junction Temperature TJ -55 to +150 °C -55 to +150 °C 6.0 °C/W 0.39 g Storage Temperature Tstg Maximum Thermal Resistance Junction to Case (per leg) RthJC Approximate Weight wt Case Style Test Conditions DC operation DPAK(TO-252) Figure 1: Typical Forward Characteristics Figure 2: Typical Reverse Characteristics ºC ºC ºC ºC Figure 3: Typical Junction Capacitance ºC ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRD10100CT 2x 5A, 100V, TO-252 Common Cathode Dimensions-DPAK(TO-252) Symbol A Min Max 2.20 2.38 1 A1 0 0.10 b 0.71 0.81 D3 A2 Millimeters c 0.46 0.56 D 6.50 6.70 D1 5.13 1 5.46 4.83 REF D2 1 E 6.00 6.20 e 2.186 2.386 L 9.80 L2 10.40 2.90 REF L1 1.40 1.70 1.60 REF L3 L4 0.60 1.00 ø θ 1.10 1.30 0° 8° A2 0.91 1.11 5.35 REF V D3 1.778 REF h 0.762 REF θ1 7° Carrier Tape & Reel Specification Symbol Part Numbering and Marking System MBRD10100CT LF YYWWL MBR D 10 100 CT LF YY WW L = Device Type = Package type = Forward Current (10A) = Reverse Voltage (100V) = Configuration = Littelfuse = Year = Week = Lot Number Millimeters Min Max A 6.80 7.00 B 10.40 10.60 C 2.60 2.80 d ø1.45 ø1.65 E 1.65 1.85 F 7.40 7.60 P0 3.90 4.10 P 7.90 8.10 P1 1.90 2.10 W 15.90 16.30 Packing Options Part Number Marking Packing Mode M.O.Q MBRD10100CT MBRD10100CT 2500pcs / reel 2500 ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15