TM7105PM

Model # TM7105PM
Available As:
TM7105PM: 4 Pin, 0.500” TO-8 Package (T4)
TN7105PM: 4 Pin, 0.450” Sq. Surface-mount Package (SM3)
FP7105PM: 4 Pin, 0.500” Sq. Flatpack (FP4)
RF/Microwave Amplifier
BX7105PM: SMA Connectorized Housing (H1)
Features
• No Additional Circuitry Needed, Internal Blocking Caps Included
• Unconditionally Stable
• Modifications Available at No Additional Charge
• Environmental Screening Available
• EAR99
• Superior Phase Noise Performance
Technical Specifications
Maximum Ratings
Parameter
Typical
25°C
Frequency Range
1 MHz – 250 MHz
1 MHz - 150 MHz
15 dB
13.5 dB Min.
+/- 0.4 dB
+/- 0.7 dB Max.
2.5 dB
3.5 dB Max.
+15 dBm
+14 dBm
Gain
Gain Flatness
Noise Figure (10-150 MHz)
Output Power @ 1 dB
Compression
Output
3rd
Order Intercept
Output
2nd
Order Intercept
Min/Max55°C to +85°C
+30 dBm
---
+42 dBm
---
18.5 dB
---
Input VSWR
1.5:1
2.0:1 Max.
Output VSWR
1.5:1
2.0:1 Max.
Supply Voltage
+5 volts
+5 volts
Supply Current
35 mA
45 mA Max.
Reverse Isolation
Maximum (No Damage) Ratings
Storage Temperature
-62°C to +125°C
Operating Temperature
-55°C to +125°C
Case Temperature
+125°C
DC Voltage @ 25°C
+ 8 volts
Continuous RF Input Power
+ 13 dBm
Short Term RF Input Power
50 Milliwatts
(1 Minute Max.)
0.1 Watt
(3 μsec Max.)
Maximum Peak Power
•
Typical values are measured at 25°C,
but not guaranteed.
•
Max input power +13 dBm with 50
ohms terminated at RF output port.
Guaranteed Phase Noise (60 MHz)
Performance (dBc/Hz) at 25C
Frequency
(Offset)
Typical
Guaranteed
100 Hz
-165
-160
1 kHz
-173
-165
10 kHz
-175
-170
100 kHz
-175
-170
1 MHz
-172
-168
Rev Date: 2/1/2016
© API Technologies Corp. Proprietary Information
Page # 1
|
www.apitech.com
|
micro.apitech.com
|
+1.888.553.7531
|
[email protected]
Model # TM7105PM
Instructions
Grounding Instructions
Care should be taken to effectively ground each unit.
Revisions
API reserves the right to make revisions to both product and/or the information contained within their
datasheets without advanced notice.
Min./Max. Values
Specifications are guaranteed when tested in a 50 Ω (ohm) system from -55°C to +85°C.
Typical performance graphs and values are measured at 25°C, but not guaranteed.
Outline Drawing
(For reference only (FP7105PM)
Rev Date: 2/1/2016
© API Technologies Corp. Proprietary Information
Page # 2
|
www.apitech.com
|
micro.apitech.com
|
+1.888.553.7531
|
[email protected]