Model #624107 Dielectric Resonator Oscillator Features • • • • • Frequency: 7000 MHz Low Phase Noise: -90 dBc/Hz @ 100 Hz Low Spurious: -70 dBc Typical External Reference: 100 MHz Environmental Screening Available Description API’s 600 Series Phase Locked Oscillators use a High “Q” Dielectric Resonator in the resonant circuit. The circuit is lightly loaded to obtain the lowest phase noise possible. The resonator is screwed to a printed circuit board and well-grounded to minimize modulation sidebands during shock and vibration. Isolators are used to provide isolation from load VSWRs. Regulators filter noise on the DC input voltage. Internal reference models are also available. A lock indicator circuit is provided to signal an out-of-lock condition. Specifications CHARACTERISTIC Frequency Output Power (dBm) Variation Over Temperature (dBm) Spurious (dBc) Phase Noise (dB) VSWR Harmonics (dBc) External Reference (MHz) Lock Indicator Storage Temperature Supply Power DC mA TYPICAL Ta = +25°C MIN/MAX Ta = -20°C to +70°C 7000 MHz 7000 MHz +13.0 +/- 1.5 dBm -65 -62 dBc/Hz @ 10 Hz -90 dBc/Hz @ 100 Hz -115 dBc/Hz @ 1 KHz -123 dBc/Hz @ 10 KHz -128 dBc/Hz @ 100 KHz 1.5 +12.0. +/- 2 dBm -60 -57 dBc/Hz @ 10 Hz -85 dBc/Hz @ 100 Hz -105 dBc/Hz @ 1 KHz -120 dBc/Hz @ 10 KHz -125 dBc/Hz @ 100 KHz 2.0 -25 100 TTL (High = Locked) -55 -20 100 TTL (Low = Unlocked) +125 15 150 15 160 Rev Date: 12/17/2015 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] #624107 Performance Drawing Package Outline Drawing Rev Date: 12/17/2015 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]