MM9xMS

Triple Balanced Mixer
Model MM9xMS
Model MM9xMS-14
RF 1.5 to 19.0 GHz
Multi-Octave Band
Electrical Specifications: (1)
Parameter
SSB Conversion
loss: (2) (3)
Conditions
RF (GHz)
2.0-18.0
2.0-18.0
1.5-19.0
Isolation
LO to RF:
LO to IF:
LO (GHz)
2.0-18.0
2.0-18.0
1.5-19.0
Specifications
IF (MHz)
2.0-5.0
0.5-6.5
0.5-6.5
Min
15
20
17
20
1.5-4.0
4.0-19.0
1.5-4.0
4.0-19.0
RF to IF:
IF to RF:
Input 1-dB
Compression Point:
1.5-19.0
1.5-19.0
1.5-19.0
0.5-6.5
Input Third Order
Intercept Point:
1.5-19.0
1.5-19.0
0.5-.6.5
LO Power: (4)
1.5-19.0
1.5-19.0
0.5-6.5
dB
dB
dB
dB
0.5-6.5
Typical
6.8 dB
7.8 dB
8.0 dB
23
31
19
25
27
20
Max
9.0 dB
11.0 dB
11.5 dB
Model MM9xMS
Model MM9xMS-14
LO Power
4 = +10 dBm
6 = +13 dBm
7 = +17 dBm
8 = +21 dBm
dB
dB
dB
dB
dB
dB
+5 dBm
+8 dBm
+12 dBm
+15 dBm
+14 dBm
+17 dBm
+21 dBm
+24 dBm
+10 dBm
+13 dBm
+17 dBm
+21 dBm
MM94
MM96
MM97
MM98
MM94
MM96
MM97
MM98
MM94
MM96
MM97
MM98
Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the
nominal LO power. Specifications indicated as typical are not guaranteed.
2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz.
3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C.
4. Usable LO drives are up to 2 dB below and 3 dB above nominal.
MM9xMS
Outline: MS3AL
MM9xMS-14
Outline: MS3BL
Typical
Performance
at 25˚C
All dimensions are in inches and [mm].
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001
Rev. B
3/4/09