SA01D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiency up to 80% SMD Package with Industry Standard Pinout Dual Outputs Isolation Voltage 1000 VDC Operating Temperature Range –40° to +85°C Low ripple and noise Lead free, RoHs Compliant Moisture sensitivity level (MSL) 3 3 Years Product Warranty The SA01D series are miniature, SMD Package, isolated 1W DC/DC converters with 1,000VDC isolation. It allows a wide operating temperature range of –40°C to +85°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. Model List Model Number SA01D0505A SA01D0505ATR SA01D0509A SA01D0509ATR SA01D0512A SA01D0512ATR SA01D0515A SA01D0515ATR SA01D1205A SA01D1205ATR SA01D1209A SA01D1209ATR SA01D1212A SA01D1212ATR SA01D1215A SA01D1215ATR SA01D2405A SA01D2405ATR SA01D2409A SA01D2409ATR SA01D2412A SA01D2412ATR SA01D2415A SA01D2415ATR Input Voltage (Range) Output Voltage Max. Min. @Max. Load @No Load VDC VDC mA mA mA(typ.) mA(typ.) ±5 ±100 ±2 267 ±9 ±55 ±1 260 5 (4.5 ~ 5.5) 12 (10.8 ~ 13.2) 24 (21.6 ~ 26.4) DS_SA01D_03192015 Output Current Input Current Load Max. capacitive Regulation Load Efficiency (typ.) @Max. Load % (max.) uF 10 75 10 30 % 76 33 ±12 ±42 ±0.8 255 8 79 ±15 ±33 ±0.7 251 7 79 ±5 ±100 ±2 111 8 75 ±9 ±55 ±1 109 8 15 76 33 ±12 ±42 ±0.8 105 5 80 ±15 ±33 ±0.7 103 5 80 ±5 ±100 ±2 56 8 74 ±9 ±55 ±1 55 8 9 75 33 ±12 ±42 ±0.8 53 5 79 ±15 ±33 ±0.7 52 5 79 E-mail: [email protected] http://www.deltaww.com/dcdc P1 Input Characteristics Parameter Input Voltage Range Input Surge Voltage (1 sec. max.) Model Min. Typ. Max. 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2 24V Input Models 21.6 24 26.4 5V Input Models -0.7 --- 9 12V Input Models -0.7 --- 18 24V Input Models -0.7 --- 30 --- --- 0.3 Reverse Polarity Input Current Input Filter All Models Internal Power Dissipation Unit VDC A Internal Capacitor --- --- 450 mW Output Characteristics Parameter Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation Ripple & Noise (20MHz) Ripple & Noise (20MHz) Ripple & Noise (20MHz) Temperature Coefficient Short Circuit Protection Conditions Dual Output, Balanced Loads For Vin Change of 1% Io=20% to 100% Over Line, Load & Temp. Min. --------------- Typ. Max. ±1.0 ±3.0 ±0.1 ±1.0 ±1.2 ±1.5 See Model Selection Guide 60 120 --150 --15 ±0.01 ±0.02 0.5 Second Max. Unit % % % mV P-P mV P-P mV rms %/℃ General Characteristics Parameter Conditions Min. Typ. Max. Unit 60 Seconds 1000 --- --- VDC I/O Isolation Resistance 500 VDC 1000 --- --- MΩ I/O Isolation Capacitance 100KHz, 1V --- 40 100 pF 50 100 140 KHz 2,000,000 --- --- Hours I/O Isolation Voltage (rated) Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-020D Level 3 Recommended Input Fuse 5V Input Models 500mA Slow-Blow Type 12V Input Models 200mA Slow-Blow Type 24V Input Models 100mA Slow-Blow Type Environmental Specifications Parameter Operating Temperature Range (with Derating) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) DS_SA01D_03192015 Conditions Ambient Min. Max. -40 +85 --+90 -50 +125 --95 Free-Air convection --260 Unit ℃ ℃ ℃ % rel. H ℃ E-mail: [email protected] http://www.deltaww.com/dcdc P2 Power Derating Curve 100 Natural convection Output Power (%) 80 100LFM 200LFM 60 400LFM 40 20 0 ~ -40 0 20 40 60 80 100 110 Ambient Temperature ] Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 Ripple & Noise measurement bandwidth is 0-20MHz. 3 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 4 All DC/DC converters should be externally fused at the front end for protection. 5 Specifications subject to change without notice. DS_SA01D_03192015 E-mail: [email protected] http://www.deltaww.com/dcdc P3 Mechancial Drawing 3 4 6 5 R 2.54 [0.1] 10.16 [0.40] 1.7 [0.07] 0~ 4 0. 5 2 7 11.2 [0.44] 1 8 8.0 [0.31] 10 9 Connecting Pin Patterns 0.3 [0.01] Mechanical Dimensions (5V & 12V Input) 10.8 [0.43] ( Magnification of A ) 10.16 [0.4] 15.3 [0.6] 0.60 [0.02] 7.1 0.5 [0.28 0.02] A 7.0 [0.28] 0.15 S 9.2 [0.36] R 2.54 [0.1] 0~ 4 5 5 4 6 0. 3 7 11.2 [0.44] 2 8 8.3 [0.33] 1 9 Pin Connections Pin 0.25 [0.01] Mechanical Dimensions (24V Input) 10 ( Magnification of A ) 10.16 [0.4] 8.05 0.5 [0.32 0.02] 0.25 [0.01] 7.8 [0.31] 15.24 [0.6] 0.60 [0.02] 1.0 [0.04] S SEATING PLANE 0.3 [0.01] 6.8 [0.27] 2.54 [0.10] S SEATING PLANE 7.4 [0.29] 9.0 [0.35] 0.15 S Function 1 -Vin 2 +Vin 3 NA 4 Common 5 -Vout 6 NA 7 +Vout 8 NA 9 NA 10 NA NA : Not Available for Electrical Connection ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ►Pins ±0.05 (±0.002) Physical Outline Case Size (5V&12V Input) Case Size (24V Input) : : 15.24x8.0x6.8mm (0.60x0.31x0.27 Inches) 15.24 x8.3x7.8mm (0.60x0.33x0.31 Inches) Case Material : Molding (flammability to UL 94V-0 rated) Weight (5V&12V Input) Weight (24V Input) : : 1.8g 2.2g DS_SA01D_03192015 E-mail: [email protected] http://www.deltaww.com/dcdc P4 Reel Taping Package 0.4 { 0.05 2.0 4.0 5 12.76 14.7 30 24.0 { 0.15 11.5 1.75 1.5 +0 -0 .1 Tape(5V & 12V Input) 7.05 16.0 7.4 47 5 2.0 95 6.7 7.66 11.6 Tape(24V Input) 15.6 13.6 6 20 11.5 2.0 24.0 { 0.3 4.0 1.75 0.4 { 0.05 .1 +0 -0 1.5 3.0 16.0 8.1 8.4 0.3 3.0 30 6 5.0 8.6 11.4 ►All dimensions in mm ►Tolerance: ±0.1 DS_SA01D_03192015 E-mail: [email protected] http://www.deltaww.com/dcdc P5 Reel Taping Package Packaging Specifications 29.1 99.1 330.0 13.45 0.25 2.2 ►All dimensions in mm ►Tolerance: ±0.1 Part Numbering System S A 01 D 05 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D - DIP P - SIP S - SMD A~Z 01 - 1W 02 - 2W 03 - 3W 04 - 4W 06 - 6W 03 - 3.3V 05 - 5V 12 - 12V 24 - 24V 48 - 48V 03 - 3.3V 05 - 5V 09 - 9V 12 -12V 15 - 15V 24 - 24V A - Std. Functions S - Single D - Dual WARRANTY Delta offers a three (3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_SA01D_03192015 E-mail: [email protected] http://www.deltaww.com/dcdc P6