DOMINANT Opto Technologies Innovating Illumination SpiceLED TM DATA SHEET: SpiceLEDTM AlInGaP S-Spice : SSx-CLD TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size yet the SpiceLED™ packs a powerful performance and is a highly reliable design device. Its versality enables its application in automotive applicances, key-pad illumination, hand-held devices such as PDAs, notebooks, compact back-lighting applications, consumer appliances, office equipment, audio and video equipment. Features: > > > > > > > High brightness surface mount LED. Super wide viewing angle of 160°. Equivalent to 0603 package outline. Copper lead-frame construction. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Compliance to automotive standard; AEC-Q101. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer Appliances: LCD illumination as in PDAs, LCD TV. > Communication: indicator and backlight in mobilephone. > Display: full color display video notice board. > Industry: white goods (eg: Oven, microwave, etc.). © 2005 SpiceLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Luminous Intensity @ 20mA IV (mcd) Min. Typ. Max Viewing Angle˚ SSS-CLD-N2P-1 Super Red, 632 nm 160 35.5 56.0 71.5 SSS-CLD-P2Q-1 Super Red, 632 nm 160 56.0 90.0 112.5 SSR-CLD-PQ1-1 Red, 625 nm 160 45.0 71.5 90.0 SSA-CLD-P2Q-1 Amber, 615nm 160 56.0 90.0 112.5 SSO-CLD-P2Q-1 Orange, 605 nm 160 56.0 90.0 112.5 SSO-CLD-QR1-1 Orange, 605 nm 160 71.5 112.5 140.0 SSY-CLD-P2Q-1 Yellow, 587 nm 160 56.0 90.0 112.5 SSY-CLD-Q2R-1 Yellow, 587 nm 160 90.0 135.0 180.0 SSG-CLD-M2N-1 Green, 570 nm 160 22.4 35.5 45.0 SSP-CLD-KL1-1 Pure Green, 560 nm 160 7.2 11.2 14.0 NOTE 1. All part number above comes in a quantity of 3000 units per reel. 2. Other luminious intensity groups are also available upon request 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. Electrical Characteristics at Tj=25˚C Vf @ If = 20mA Part Number SSx-CLD Vr @ Ir = 10uA Min. (V) Typ. (V) Max. (V) 1.8 2.0 2.4 Min. (V) 12 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. 2 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination Absolute Maximum Ratings Maximum Value Unit DC forward current 30 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 250 mA Reverse voltage 12 V 2000 V 110 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 80 mW 450 K/W 250 K/W ESD threshold (HBM) LED junction temperature Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 3 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination Characteristics Symbol Temperature coefficient of dom (typ) IF = 20mA; 0 ˚C <= T <= 85 ˚C Temperature coefficient of VF (typ) IF = 20mA; 0 ˚C <= T <= 85 ˚C Temperature coefficient of IV (typ) IF = 20mA; 0 ˚C <= T <= 85 ˚C TC Part Number dom (typ) TCV TCIV 4 Value SSS-CLD 0.04 SSR-CLD 0.05 SSA-CLD 0.07 SSO-CLD 0.08 SSY-CLD 0.09 SSG-CLD 0.10 SSP-CLD 0.10 SSS-CLD -2.4 SSR-CLD -3.3 SSA-CLD -3.2 SSO-CLD -2.4 SSY-CLD -3.3 SSG-CLD -1.2 SSP-CLD -1.6 SSS-CLD -0.55 SSR-CLD -0.59 SSA-CLD -0.62 SSO-CLD -0.65 SSY-CLD -1.05 SSG-CLD -1.20 SSP-CLD -1.20 Unit nm / K mV / K %/K 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination Wavelength Grouping Color Group Wavelength distribution (nm) SSS; Super Red Full 625 - 640 SSR; Red Full 620 - 630 SSA; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 600 - 612 W 600 - 603 X 603 - 606 Y 606 - 609 Z 609 - 612 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 Full 564.5 - 576.5 W 564.5 - 567.5 X 567.5 - 570.5 Y 570.5 - 573.5 Z 573.5 - 576.5 Full 552.5 - 564.5 W 552.5 - 555.5 X 555.5 - 558.5 Y 558.5 - 561.5 Z 561.5 - 564.5 SSO; Orange SSY; Yellow SSG; Green SSP; Pure Green Dominant wavelength is measured with an accuracy of ± 1nm . 5 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group K1 7.20...9.00 K2 9.00...11.20 L1 11.20...14.00 M2 22.40...28.50 N1 28.50...35.50 N2 35.50...45.00 P1 45.00...56.00 P2 56.00...71.50 Q1 71.50...90.00 Q2 90.00...112.50 R1 112.50...140.00 R2 140.00...180.00 Luminous intensity is measured with an accuracy of ± 11%. 6 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination MultipleVs X-Y Plot Relative Intensity Forward Current 2.2 2.2 Forward Current Vs Forward Voltage Variables 22 35 Col_2 30 Forward Current, mA Relative Intensity 1.8 1.8 1.6 1.6 1.4 1.4 1.2 1.2 11 0.8 0.8 0.6 0.6 0.4 0.4 20 15 10 5 0.2 0.2 00 0 00 10 10 20 20 30 30 40 40 5050 6060 1.2 1.4 1.6 2 2.2 2.4 Forward Voltage, V Maximum Current Vs Ambient Temperature Relative Intensity Vs Wavelength 1 Green 0.9 Relative Intensity 30 25 20 15 10 Yellow Orange 0.8 Red Pure Green 0.7 0.6 Super Red 0.5 0.4 0.3 0.2 5 0.1 0 0 0 SSx-CLD 10 20 30 40 50 60 70 80 90 100 500 550 600 650 700 750 800 Wavelength, nm Ambient Temperature Allowable Forward Current Vs Duty Ratio Allowable Forward ( Ta=25 DegCurrent C, tp10uS )Vs Duty Ratio ( Ta=25 Deg C, tp≤10uS ) Allowable Forward Current ( mA ) Allowable Forward Current ( mA ) 1.8 ForwardCol_1 Current, mA 35 Forward Current, mA 25 Radiation Pattern 1000 30 o 20 o 10 o 0o 1.0 40 o 100 10 50 o 60 o 70 o 0.8 0.6 0.4 0.2 80 o 0.1 1 10 100 90 o Duty Ratio, Duty Ratio, % % 7 0 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination SpiceLED • AlInGaP S-Spice : SSx-CLD Package Outlines TM Note: The center pad is a common cathode. Please take care during soldering to avoid shorting. Material Material Cu Alloy With NiPdAu Plating Lead-frame High Temperature Resistant Epoxy Resin Package Note: product is Pb free 8 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination Recommended Solder Pad Note: Component is based on a new package platform, which features “Bottom Only Terminations“. Solder joints are only formed at the bottom of the component and solder fillet will not be observable as the sides of the component. Surface are not intended for soldering 9 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 3000 units. • Reel diameter is 180 mm. Current New Issue No : 1 Page 1 of 2 10 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination Packaging Specification 11 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination Packaging Specification Existing BPL Moisture sensitivity level size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL Barcode label changed to the following. DOMINANT Opto Technologies (L) Lot No : lotno ML TEMP 2 260˚C RoHS Compliant (P) Part No : partno (C) Cust No : partno (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D bar Reel implemented now for every data field. Label Moisture absorbent material + Moisture indicator Issue No : 1 The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Weight Weight(gram) (gram) Average 1pc SpiceLED 1 completed bag (3000pcs) 0.001 0.034 140 ± 10 190 10 Cardboard Box DOMINANT TM For SpiceLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 12 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 13 26/10/2015 V12.0 DOMINANT TM AlInGaP S-Spice : SSx-CLD Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - New Format 09 Jun 2009 - Update Company Name 11 Mar 2010 2 Add new partno: SSA-CLD-P2Q-1 05 May 2010 2 Add new partno: SSS-CLD-P2Q-1 21 Oct 2010 2 Add new partno: SSY-CLD-Q2R-1 25 Jan 2011 4 Add Characteristics 10 Dec 2013 7, 10 Update graph: Relative Intensity Vs Forward Current Update Carrier Tape 14 Feb 2014 7 Add Graph: Allowable Forward Current Vs Duty Ratio 02 Apr 2015 1, 12 Add Features Update Package Specification 26 Oct 2015 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 14 26/10/2015 V12.0 DOMINANT TM Opto Technologies AlInGaP S-Spice : SSx-CLD Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM