Wireline® 3dB Quadrature Hybrids • Drop-in (consult for cut & trimmed and connectorized) • Bendable / formable • Low loss, low cost • Aerospace and commercial heritage • RoHS compliant (tin-plated and bare finishes only) Electrical Specification Bandwidth Optimization Coupling, Coupled Path (dB) Unbalanced, Max. (dB), Coupled Path to Main Line Insertion Loss Max. (dB) Isolation, Min. (dB) VSWR, Max. Power, Average (W) Power, Peak (kW) Phase Quadrature Error, Max. (°) Dielectric Breakdown, Min. (V RMS) BHC*1 HC*1 BJC*1 JC*1 BHC*2 HC*2 BJC*2 JC*2 Narrow 3.00 ± 0.25 0.5 0.3 20 1.2:1 100 2 ±1 500 Narrow 3.00 ± 0.25 0.5 0.3 20 1.2:1 200 2 ±1 500 Octave 2.65 ± 0.25 1.3 0.3 20 1.2:1 100 2 ±1 500 Octave 3.65 ± 0.25 1.3 0.3 20 1.2:1 200 2 ±1 500 * Shield finish code - see Part Number Key on Website Datasheet Electrical specifications summarized in the table above are determined by measurements at 300 MHz in a matched 50 ohm system and are independent of physical length and frequency with the exception of power. At jacket temperatures above 55°C, the power should be derated linearly to 50% at 105°C and to 0 at 155°C. Mechanical Specification Weight ounces (grams) per inch/mm Bendable / Formable Center Line Bend radius, Min. Dimension “A” Inner Jacket Diameter Dimension “B” Outer Shield Diameter Dimension “D” Wire Diameter 0.19 (.55) Yes .15 (3,8) .086 (2,2) .105 (2,7) .0124 (0,3) 0.40 (1.14) Yes .30 (7,6) .125 (3,2) .145 (3,7) .0201 (0,5) 0.19 (.55) Yes .15 (3,8) .086 (2,2) .105 (2,7) .0124 (0,3) 0.40 (1.14) Yes .30 (7,6) .125 (3,2) .145 (3,7) .0201 (0,5) All dimensions shown in decimal inches (mm). Specifications subject to change without notice. For mounting instructions, additional specifications or other products, visit us online or contact the factory. [email protected] micro.apitech.com +1 855.294.3800 www.apitech.com