60 MHz SAW Filter 7.8 MHz Bandwidth Part Number: SF0060BA03214T DESCRIPTION • • • 60 MHz SAW bandpass filter with 7.8 MHz bandwidth. 35.1 x 20.6 mm 24-pin DIP package. RoHS compliant. TYPICAL PERFORMANCE Amp 10 dB/div Amp 1 dB/div Phase 4 deg/div Center = 60 MHz, 5 MHz/div (62.5 kHz incr) S11 (35-85 MHz) S22 (35-85 MHz) Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0060BA03214T Rev A ECN 36650 9-Feb-2010 Page 1 of 3 60 MHz SAW Filter 7.8 MHz Bandwidth Part Number: SF0060BA03214T SPECIFICATION Parameter Center Frequency (Fc) 1 1dB Bandwidth 2 3dB Bandwidth 2 55dB Bandwidth 2 Device Delay Average Insertion Loss 3 Passband Amplitude Ripple 3 Passband Phase Ripple 3 Triple Travel and Spurious Input VSWR (at 60 MHz at 25ºC) Output VSWR (at 60 MHz at 25ºC) Temperature Coefficient Source and Load Impedance Ambient Temperature Notes: Min 59.90 7.8 2.9 55 - Typ 60.00 8.4 8.9 11.2 2.95 30.5 0.3 1.2 58 1.35 1.35 -74 50 25 Max 60.10 9.2 12.2 3 34 0.4 2 1.5 1.5 - Units MHz MHz MHz MHz us dB dB p-p deg p-p dB :1 :1 ppm/°C Ω ˚C 1. Defined as the average of the lower and upper 3 dB frequencies at room ambient. 2. All dB levels are defined relative to the insertion loss. 3. Evaluated from 56.1 to 63.9 MHz at room ambient. MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Range Input Power Level Min Max -40 -25 - 85 85 13 Units ˚C ˚C dBm MATCHING CIRCUIT 3 15 Input 50 Ω Single-ended Output 50 Ω Single-ended 22 10 Lp1 = 82 nH Lp2 = 82 nH Notes: • Recommend 2% toleranced matching components. Typical Inductor Q=40. • Values shown are for guidance only and may change depending upon board layout. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0060BA03214T Rev A ECN 36650 9-Feb-2010 Page 2 of 3 60 MHz SAW Filter 7.8 MHz Bandwidth Part Number: SF0060BA03214T PACKAGE OUTLINE Units: mm Tolerances are ±0.15 mm except where indicated. Pin Configuration: Input: 3 Input Return: 22 Output: 15 Output Return: 10 Ground: All other pins SMI BA03214T ∆ YYDDD Date Code (YY=year, DDD=Day) ESD Symbol ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0060BA03214T Rev A ECN 36650 9-Feb-2010 Page 3 of 3