96 MHz SAW Filter 4.8 MHz Bandwidth Part Number: SF0096BA02394S DESCRIPTION • • • 96 MHz SAW bandpass filter with 4.8 MHz bandwidth for TD-SCDMA applications. 19 x 6.5 mm SMP. RoHS compliant. TYPICAL PERFORMANCE Horizontal: Vertical from top: S11 (83.5 to 108.5 MHz) Frequency : Relative Magnitude : Relative magnitude : Group Delay : 2.5 10 1 50 MHz/div dB/div dB/div ns/div S22 (83.5 to 108.5 MHz) Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0096BA02394S Rev A 22-Feb-2010 ECN 36650 Page 1 of 3 96 MHz SAW Filter 4.8 MHz Bandwidth Part Number: SF0096BA02394S SPECIFICATION Parameter Center Frequency ( Fc) 1 Minimum Insertion Loss 2 1 dB Bandwidth 35 dB bandwidth Passband Variation (Fc +/- 2.4 MHz) Group Delay Variation (Fc +/- 2.4 MHz) 3 Change in Absolute Delay from unit to unit Absolute Delay Variation from -5˚C to 75˚C Input Return Loss (Fc +/- 1.92 MHz) Output return Loss (Fc +/- 1.92 MHz) Absolute Delay Rejection (40 to 87 MHz) (111 to 150 MHz) Ambient Temperature Source and Load Impedance Substrate Material Notes: Min 95.90 4.80 -10 10 10 43 43 20 Typ 96.00 23.5 5.00 6.60 0.6 60 6 14 14 2.00 46 46 25 50 LiTaO3 Max 96.10 25 6.80 0.8 80 10 10 3.00 30 Units MHz dB MHz MHz dB p-p ns p-p ns ns dB dB us dB dB ˚C Ω - 1. Average of lower and upper 3 dB frequencies (3 dB measured from peak). 2. All dB values are referenced to the insertion loss. 3. A smoothing aperture of 0.125 MHz may be applied to this measurement. MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Range Operating Input Power Level Min Max Units -40 -5 - 85 75 +10 ˚C ˚C dBm MATCHING CIRCUIT 1 6 Input 50 Ω Single-ended Output 50 Ω Single-ended 10 5 Typical component values: Ls1 Lp1 Rp1 = = = 6.8 56 100 nH nH Ω Ls2 = Lp2 = Rp2 = 91 47 120 nH nH Ω Notes: 1. Recommend use of +/- 2% tolerance components. Minimum Q=40. 2. Component values are for reference only and may change depending on board layout. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0096BA02394S Rev A 22-Feb-2010 ECN 36650 Page 2 of 3 96 MHz SAW Filter 4.8 MHz Bandwidth Part Number: SF0096BA02394S PACKAGE OUTLINE SUGGESTED FOOTPRINT Units: mm Tolerances are ±0.15 mm except for the overall length, width and pad dimensions, which are nominal values. Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating Pad Configuration: Input: 1 Input return: 10 Output: 6 Output return: 5 Ground: all other pads ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0096BA02394S Rev A 22-Feb-2010 ECN 36650 Page 3 of 3