96 MHz SAW Filter 20 MHz Bandwidth Part Number: SF0096BA03001S DESCRIPTION • • • 96 MHz SAW bandpass filter with 20 MHz bandwidth for WCDMA applications. 13.3 x 6.5 mm SMP. RoHS compliant. TYPICAL PERFORMANCE 50. ns/" Horizontal: Vertical from top: S11 (56 to 136 MHz) Frequency : Relative Magnitude : Relative magnitude : Phase Linearity: Group Delay : 8 10 1 5 50 MHz/div dB/div dB/div deg/div ns/div S22 (56 to 136 MHz) Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0096BA03001S Rev A 22-Feb-2010 ECN 36650 Page 1 of 3 96 MHz SAW Filter 20 MHz Bandwidth Part Number: SF0096BA03001S SPECIFICATION Parameter Center Frequency ( Fc) 1 Insertion Loss 2 0.6 dB Bandwidth 3 40 dB bandwidth Amplitude Ripple (86 to 106 MHz) Amplitude Ripple in any 3.84 MHz band (86 to 106 MHz) Phase Linearity (86 to 106 MHz) Group Delay Variation (86 to 106 MHz) Absolute Delay Rejection (0.3 to 10 MHz) 3 Rejection (10 to 68 MHz) 3 Rejection (68 to 78.5 MHz) 3 Rejection (113.5 to 124 MHz) 3 Rejection (124 to 160 MHz) 3 Rejection (160 to 500 MHz) 3 Ambient Temperature Temperature Coefficient of Frequency Source and Load Impedance Notes: Min 20 25 45 40 40 45 25 20 - Typ 96 14 22.8 31.5 0.6 0.3 3 20 0.89 50 50 45 45 52 27 25 -90 50 Max 15.5 35 0.8 0.6 7 50 30 - Units MHz dB MHz MHz dB p-p dB p-p deg p-p ns us dB dB dB dB dB dB ˚C ppm/˚C Ω 1. Average of lower and upper 3 dB frequencies (3 dB measured from peak). 2. Average loss over 86 to 106 MHz. 3. Reference 0 dB at insertion loss level. MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Range Operating Input Power Level Min Max Units -40 -40 - 85 85 +10 ˚C ˚C dBm MATCHING CIRCUIT 11 5 Output 50 Ω Single-ended Input 50 Ω Single-ended 12 6 Typical component values: Lp1 Ls1 = = 820 82 nH nH Ls2 = 68 nH Notes: 1. Recommend use of +/- 2% tolerance components. Minimum Q=40. 2. Component values are for reference only and may change depending on board layout. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0096BA03001S Rev A 22-Feb-2010 ECN 36650 Page 2 of 3 96 MHz SAW Filter 20 MHz Bandwidth Part Number: SF0096BA03001S PACKAGE OUTLINE SUGGESTED FOOTPRINT Units: mm Tolerances are ±0.15 mm except for the overall length, width and pad dimensions, which are nominal values. Pad Configuration: Input: 11 Input return: 12 Output: 5 Output return: 6 Ground: all other pads Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0096BA03001S Rev A 22-Feb-2010 ECN 36650 Page 3 of 3