AXLE2000

Designed and
Manufactured
in Germany
Specification
Oscillator type:
Rev.: 1
Date: 2016-02-01
AXLE2000
SHF Low Phase Noise TCXO in Connectorized Package
Parameter
Frequency range
Frequency stability
Initial tolerance @ +25°C
vs. operating temperature range
vs. supply voltage variation (pushing)
vs. load change (pulling)
st
Long term (aging) 1 year
RF output
Signal waveform
Load RL
Output level
Harmonics
Sub-harmonics
Spurious
PLL Products
Phase noise
Lock detect (LD) output
Supply voltage VS
Current consumption
Enclosure (see drawing) (LxWxH)
Weight
Packing
Notes:
1.
2.
3.
min.
typ.
max.
Unit
Condition
12
GHz
Multiplication (Note 2)
±1.0
ppm
ppm
Option 1 & 2
ppm
ppm
ppm
VS ±5%
RL ±5%
after 30 days operation
Ω
dBm
dBc
dBc
dBc
dBc
dBc/Hz
V
V
V
mA
±5%
3
±0.5 to ±5
See tables 1 & 2
±0.1
±0.1
±1.0
+10
2.3
11.4
Sine wave
50
+13
-120
0
3.3
12.0
250
-30
-40
-80
-60
-110
1.0
12.6
350
50.0x50.0x21.0 max.
60
Palette
(Note 3)
@ 100 kHz
Out of lock
Locked
mm
g
Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
Frequency multiplication factor N depends on output frequency fOUT
Internal PLL with TCXO reference
Absolute Maximum Ratings
Parameter
min.
max.
Supply Voltage VS
Storage Temperature
-0.5
-55
VS + 10%
+105
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXLE2000 Rev.1
Drawing D1
Page 1(4)
Unit
Condition
V
°C
VS to GND
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: [email protected]
Designed and
Manufactured
in Germany
Frequency stability vs. temperature
Stability
[ppm]
±0.5
±1.0
±1.5
±2.0
±2.5
±3.0
±3.5
±5.0
Option 1
05
10
15
20
25
30
35
50
Table 1
Lower Temperature
Option 2
T [°C]
0
0
1
-10
2
-20
3
-30
4
-40
Upper Temperature
Option 2
T [°C]
A
+50
B
+60
C
+70
D
+75
E
+80
F
+85
Table 2
Ordering Code
Option 1
[Stability]
Option 2
[Temperature Revision
range]
AXLE2000
Table 1
Table 2
R1
Example: AXLE2000-10-2C_R1 – 6.500 GHz
Model
Handling and Testing
Parameter
Handling and Testing
Processing
Parameter
Electrostatic discharge (ESD)
THD devices
SMD devices
Washable
RoHS- Compliant
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
Frequency [GHz]
6.500
Procedure
Application Note AXAN-011
Application Note AXAN-012
Procedure
IEC60749-26
IEC60749-27
Yes
Yes
AXLE2000 Rev.1
Drawing D1
Page 2(4)
HBM
MM
No
No
Source
www.axtal.com
www.axtal.com
Condition
2000 V
200 V
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: [email protected]
Designed and
Manufactured
in Germany
Enclosure drawing
Pin connections:
Pin # Symbol
1
VS
2
GND
3
LD
SMA RF OUT
Function
Supply Voltage
Ground
Lock Detect Output
RF Output
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXLE2000 Rev.1
Drawing D1
Page 3(4)
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: [email protected]
Designed and
Manufactured
in Germany
Environmental conditions
Test
Sealing tests
(if applicable)
Solderability
Resistance to
soldering heat
Shock*
IEC
60068
Part …
2-17
IEC
60679-1
Clause
5.6.2
MIL-STD202G
Method
112E
2-20
2-58
5.6.3
208H
210F
2-27
5.6.8
213B
Vibration,
2-6
5.6.7.1
201A
sinusoidal*
204D
Vibration,
2-64
5.6.7.3
214A
random*
Endurance tests
108A
- ageing
5.7.1
- extended aging
5.7.2
Other environmental conditions on request
MIL-STD810F
Method
MIL-PRF55310D
Clause
3.6.1.2
3.6.52
3.6.48
516.4
3.6.40
516.4-4
3.6.38.1
3.6.38.2
3.6.38.3
3.6.38.4
514.5
4.8.35
Test conditions (IEC)
Gross leak: Test Qc,
Fine leak: Test Qk
Test Ta Method 1
Test Td1 Method 2
Test Td2 Method 2
Test Ea, 3 x per axes 100g,
6 ms half-sine pulse
Test Fc, 30 min per axes,
10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g
Test Fdb
30 days @ 85°C, OCXO @25°C
1000h, 2000h, 8000h @85°C
Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice.
Revision History
Rev.
Drawing
Date
[dd.mm.yyyy]
1
1
D0
D1
21.09.2015
01.02.2016
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
Remarks
First issue
PLL Spurious added
AXLE2000 Rev.1
Drawing D1
Page 4(4)
Author
Checked
HH
HH
HH
HH
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: [email protected]