SANKEN ELECTRIC CO., LTD. EG01 １ Scope The present specifications shall apply to an EG01. ２ Outline Type Silicon Diode Structure Resin Molded Applications High Frequency Rectification ３ Flammability UL94V-0(Equivalent) ４ Absolute maximum ratings No. Item Symbol Unit Rating 1 Transient Peak Reverse Voltage VRSM V 400 2 Peak Reverse Voltage VRM V 400 3 Average Forward Current IF(AV) A 0.7 4 Peak Surge Forward Current IFSM A 15 5 I2t Limiting Value I2t A2s 1.1 6 Junction Temperature Tj °C -40 to +150 7 Storage Temperature Tstg °C -40 to +150 Conditions Refer to Derating curve in Section 7 10ms. Half sine wave, one shot 1ms≦t≦10ms ５ Electrical characteristics (Ta=25°C, unless otherwise specified) No. Item Symbol Unit Rating Conditions 1 Forward Voltage Drop VF V 2.0 max. IF=0.7A 2 Reverse Leakage Current IR µA 50 max. VR=VRM 3 Reverse Leakage Current Under High Temperature H･IR µA 300 max. trr-1 ns 100 max. trr-2 ns 50 max. Rth(j-l) °C/W 20 max. 4 5 030109 Reverse Recovery Time Thermal Resistance VR=VRM, Tj=100°C IF=IRP=100mA 90% Recovery point, Tj=25°C IF=100mA, IRP=200mA 75% Recovery point, Tj=25°C Between Junction and Lead 1／4 61426-01 SANKEN ELECTRIC CO., LTD. EG01 ６ Characteristics IF(AV) － PF 2.0 Tj=150°C Forward Power Dissipation, PF (W) t T t/T=1/6 t/T=1/3,sinewave 1.0 t/T=1/2 DC 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Average Forward Current, IF(AV) (A) VR － P R 0.12 Tj=150°C Reverse Power Dissipation , PR (W) 0.10 t T 1-t/T=5/6 0.08 1-t/T=2/3 0.06 1-t/T=1/2 0.04 0.02 sinewave 0.00 0 100 200 300 400 Reverse Voltage, VR (V) 030109 2／4 61426-01 SANKEN ELECTRIC CO., LTD. EG01 ７ Derating Ta － IF(AV) VR=400(V) 0.7 DC 0.6 Average Forward Current, IF(AV) (A) t/T=1/6 0.5 t/T=1/3 t/T=1/2 0.4 sinewave 0.3 0.2 Tj=150°C 0.1 t T 0.0 100 110 120 130 140 150 Ambient Temperature, Ta (°C) 030109 3／4 61426-01 SANKEN ELECTRIC CO., LTD. EG01 ８ Package information ８-１Package type, physical dimensions and material 62.3 ±0.7 5.0 ±0.2 *1 *2 *3 φ0.6 ±0.05 ※1 0.2 φ2.7 ± ※3 ※2 The allowance position of Body against the center of whole lead wire is 0.5mm(max.) The centric allowance of lead wire against center of physical body is 0.2mm(max.) The burr may exit up to 2mm from the body of lead Dimensions in mm ８-２Appearance The body shall be clean and shall not bear any stain, rust or flaw. ８-３Marking カソード表示 CathodeBand Mark Cathode ① ① Type number EG01 is abbreviated as G0 ② Lot number 1 First digit: Last digit of Year Second digit: Month From 1 to 9 for Jan. to Sep. O for Oct., N for Nov., and D for Dec. ③ Lot number 2 (ten days) ･ Top of the month ･･ Middle of month ･･･ End of month ② ③ 030109 4／4 61426-01