TCQ Series Automotive Conductive Polymer Chip Capacitors FEATURES • Conductive polymer electrode • Benign failure mode under recommended use conditions • Robust design for automotive applications • Meets requirements of AEC-Q200 • Humidity 85°C/85%RH, Vr, (up to 500 or 1000 hours see reference table) • Basic reliability 1%/1000hrs@85°C Vr with 60% confidence level • -55 to +125°C operation temperature • Full voltage range: 4-35V • DCL 0.1 CV • 3x reflow 260°C compatible LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • Automotive, DC/DC converters, Telecommunications, Industrial Reference AVX polymer guide for more information. AVX's qualification of TCQ capacitors meets requirements of AEC-Q200. TCQ series is manufactured in an ISO TS 16949 certified facility. MARKING B, D, Y CASE AVX LOGO Polymer Polarity Band (Anode+) CASE DIMENSIONS: millimeters (inches) Capacitance Value in pF 686 = 68µF 686 A XXXXX Rated Voltage A = 10V ID Code Code EIA Code EIA Metric L±0.20 (0.008) W+0.20 (0.008) -0.10 (0.004) H+0.20 (0.008) -0.10 (0.004) W1±0.20 (0.008) A+0.30 (0.012) -0.20 (0.008) S Min. B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055) D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) Y 2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. HOW TO ORDER TCQ B Type Case Size See table above 476 M Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M = ±20% 006 # Rated DC Voltage Packaging 004 = 4Vdc R = Pure Tin 7" Reel 006 = 6.3Vdc S = Pure Tin 13" Reel 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 0070 ESR in mΩ TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Temperature Range: Reliability: All technical data relate to an ambient temperature of +25°C 4.7 μF to 220 μF ±20% 0.1CV -55°C to +125°C 1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance 60% confidence level Meets requirements of AEC-Q200 (for humidity 85°C/85%RH, VR details see reference table) NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance. 130 030116 TCQ Series Automotive Conductive Polymer Chip Capacitors CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 Code 335 475 685 106 156 226 336 476 686 107 157 227 Rated Voltage DC (VR) @ 105°C 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) B(200)* B(200)* B(200)* D(70) D(70) B(70) B(70) B(70) B(70)* B(70)* B(70)* D(25,40) D(25,40) D(70) D(70) D(70) D(25,40) D(25), Y(25) Available Ratings, (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE Case Size Capacitance (μF) Rated Voltage (V) Maximum Operating Temp. (°C) TCQD227M004#0025 TCQY227M004#0025 D Y 220 220 4 4 125 125 TCQB226M006#0070 TCQB336M006#0070 TCQB476M006#0070 TCQD157M006#0025 TCQD157M006#0040 B B B D D 22 33 47 150 150 6.3 6.3 6.3 6.3 6.3 125 125 125 125 125 TCQD686M010#0025 TCQD686M010#0040 TCQD107M010#0025 TCQD107M010#0040 D D D D 68 68 100 100 10 10 10 10 125 125 125 125 TCQD336M016#0070 TCQD476M016#0070 D D 33 47 16 16 125 125 TCQD226M020#0070 D 22 20 125 TCQD156M025#0070 D 15 25 125 TCQD106M035#0070 D 10 35 125 AVX Part No. DCL Max (μA) 4 Volt 88 88 6.3 Volt 13.2 19.8 28.2 90 90 10 Volt 68 68 100 100 16 Volt 52.8 75.2 20 Volt 44 25 Volt 37.5 35 Volt 35 DF Max (%) ESR Max @ 100kHz (mΩ) MSL 6 6 25 25 6 6 6 6 6 100kHz RMS Current (mA) 45ºC 85ºC 105ºC Humidity 85°C/85%RH, Vr (hrs) 125ºC 3 3 3000 2720 2100 1904 1350 1224 750 680 1000 500 70 70 70 25 40 3 3 3 3 3 1336 1336 1336 3000 2372 935 935 935 2100 1660 601 601 601 1350 1067 334 334 334 750 593 500 500 500 1000 1000 6 6 6 6 25 40 25 40 3 3 3 3 3000 2372 3000 2372 2100 1660 2100 1660 1350 1067 1350 1067 750 593 750 593 1000 1000 1000 1000 6 6 70 70 3 3 1793 1793 1255 1255 807 807 448 448 1000 1000 6 70 3 1793 1255 807 448 1000 6 70 3 1793 1255 807 448 1000 6 70 3 1793 1255 807 448 1000 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 223. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. 030116 131 TCQ Series Automotive Conductive Polymer Chip Capacitors RECOMMENDED DERATING FACTOR For Vr ≤ 10V Voltage and temperature derating as percentage of Vr. 100% 95% For Vr ≥ 16V 100% Rated Voltage 95% 90% 85% Rated voltage ≤10V ≥16V Operating Temperature ≤85°C 105°C 125°C 90% 90% 60% 80% 80% 54% 80% Rated Voltage 90% Recommended Application Voltage 85% 80% 75% 75% 70% 70% 67% 65% 60% 60% 60% 55% 50% 50% 85ºC 105ºC 67% 65% 55% -55% Recommended Application Voltage 125ºC 54% -55% 85ºC 105ºC 125ºC QUALIFICATION TABLE TEST Endurance Storage Life Biased Humidity Temperature Stability Surge Voltage TCQ series (Temperature range -55ºC to 125ºC) Characteristics Visual examination no visible damage DCL 2 x initial limit Determine after application of 125ºC temperature, 2/3 rated voltage for 1000 +48/-0 hours and then ΔC/C within +10/-20% of initial value leaving 1-2 hours at room temperature. Power supDF 2 x initial limit ply impedance to be ≤ 0.1Ω/V. ESR 2 x initial limit Visual examination no visible damage DCL 2x initial limit 125°C, 0V, 1000h ΔC/C within +10/-20% of initial value DF 2 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 2 x initial limit Determine after leaving for 1000 (500) hours at 85±2ºC, 85% relative humidity and rated voltage ΔC/C within +35/-5% of initial value and then recovery 1-2 hours at room temperature. DF 1.5 x initial limit ESR 2 x initial limit Condition Step 1 2 3 4 5 6 Temperature°C +20±2 -55+0/-3 +20±2 +85+3/-0 +125+3/-0 +20±2 Duration(min) 15 15 15 15 15 15 Test temperature: 125ºC +3/0ºC Surge voltage: 1.3x 2/3x rated voltage at 125°C Charge/Discharge resistance: 1000±100Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC DCL IL* ΔC/C n/a DF Visual examination IL* no visible damage DCL initial limit ΔC/C within +10/-20% of initial value for Vr ≤ 10V within +20/-30% of initial value for Vr ≥ 16V DF initial limit for Vr ≤ 10V 1.25x initial limit for Vr ≥ 16V ESR 1.25 x initial limit n/a IL* ±20% ±5% IL* IL* 10 x IL* 12.5 x IL* IL* ±20% ±30% ±5% 1.2 x IL* 1.5 x IL* IL* *Initial Limit For use outside of recommended conditions and special request, please contact manufacturer. Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours. 132 030116