GX01 Series Ultra-Broadband Capacitor ADVANTAGES APPLICATIONS • Ultra-Broadband performance • Ultra-Low Insertion Loss • Semi-Conductor Data Communications Customers • X5R & X7S Characteristics • Receiver Optical Sub-Assemblies • Excellent Return Loss • Transimpedance Amplifier Customers • Test Equipment Manufacturers The GX Series was developed specifically to address DC blocking issues from 160KHz (-3dB roll-off) to 40GHz. Most applications will experience resonance-free insertion loss of <0.4dB thru at least 40GHz. Insertion loss at higher frequencies is in part dependent on installation parameters. Using AVX’s patented precision thin film termination process, the part is designed to be completely orientation insensitive with a standard EIA 0201 footprint to minimize board space requirements. Both Ni/Sn and Ni/Au terminations are available to cover a wide range of attachment processes. All GX parts are RoHS compliant. Au terminated units are wire bondable. Users may, therefore, find these devices useful in bypass applications when wire bonding is a necessary part of the manufacturing process. More information can be obtained by contacting the factory or your local AVX representative. GX01 Series – Insertion Loss (S21) GX01 Series – Return Loss (S11) -0.2 50.00 40.00 -0.4 30.00 Magnitude dB Magnitude dB 0 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 0 5 10 15 20 25 30 35 10.00 0.00 -10.00 -20.00 -30.00 (Typical) -40.00 (Typical) -2 20.00 40 -50.00 0.4 8 16 24 32 Frequency (GHz) Frequency (GHz) Test Parameters: All testing done on 10-mil thick Rogers R03006 Microstrip board, with device under test subtending a 10 mil gap in a 13.4 mil wide center trace (nominal 50 Ohm characteristic impedance) MECHANICAL SPECIFICATIONS 0.3 ± 0.03 (0.012 ± 0.001) 3 0.0 01) 8 ± 0.0 0.5 23 ± 0 (0. 0.3 ± 0.03 (0.012 ± 0.001) 12 51 0.0 002) 2 ± ± 0. 0 0.1 004 (0. 40 GX01 Series Ultra-Broadband Capacitor ELECTRICAL SPECIFICATIONS Capacitance Voltage Rating/Operating Temperature Dielectric Withstanding Voltage Insulation Resistance Temperature Coefficient 0.01 μF +100% - 0% 10 VDC @ 85°C; 6.3 VDC @ 125ºC 250% WVDC 10,000 Meg Ohms @ 25°C; 1,000 Meg Ohms @ 125°C 10 VDC X5R (±15%); 6.3 VDC X7S (±22%) HOW TO ORDER GX 01 ZD 103 P A T D Style Case Size 01 = 0201 Voltage/Dielectric ZD = 10VDC/X5R 6.3Vdc/X7S Capacitance 103 = 0.01μF EIA Cap Code in pF Tolerance P = +100% -0% Failure Rate A = Std Termination T = Ni-Sn (Standard) 7 = Ni-Au Packaging D = 4000 pcs 3" T&R D-500 = 500 pcs 3" T&R D-1000 = 1000 pcs 3" T&R 13