TF0111 Varactor Tunable Preselector Filter 118MHz – 137MHz – typical performance I. General & Electrical Requirements 1. 2. 3. 4. 5. 6. 7. 8. 9. Tuned Center Frequency Range: FMIN = 118MHz to FMAX = 137MHz Passband @ 3dB: FSIG ±600kHz Passband Insertion Loss: ≤ 3.5dB Input/Output VSWR (within the FSIG Bandwidth into 50): < 1.50:1 Absolute Stop Band Attenuation: FSIG ±10%: 15dB minimum FSIG ±20%: 25dB minimum In-Band IIP3: +30dBm minimum In Band RF Power Handling: ≤ +20dBm (Peak, No Damage) ZIN/ZOUT: 50 nominal Tuning Method: Voltage Control (VTUNE): +1.0VDC to +10.0VDC II. Environmental & Physical Requirements 1. Temperature Range: Operating: -40°C to +85°C Storage: -45°C to +90°C 2. Solderability: Per EIAJ-STD-002 3. Package: Size: 1.25” (L) x 0.5” (W) x 0.350” (Max., H) Type: SMD (See Figure 1) Reflow Profile: See Figure 2 Tape & Reel: 100-unit minimum Figure 2: Reflow Profile Figure 1: TF0111 Outline & PAD Layout Drawing III. Data Sheet Revision: Date Rev. Author 9/11/13 B MFE 07/09/13 06/28/13 A - BRM BRM Details of Revision Adjusted the Stop Band, VSWR, and voltage range specification points and added a Max. notation for package height.. Updated the Figure 1 drawing to include a suggested PAD Layout. Original Draft. Page 1 of 1 MtronPTI - 2525 Shader Road - Orlando - Florida - 32804 - USA - 1-407-298-2000 - www.mtronpti.com MtronPTI may change specifications without notice to improve end application performance or product manufacturability. No liability is assumed as a result of product use or application. Please contact MtronPTI for latest information.