DATA SHEET MPC9109 Freescale Semiconductor Technical Data Rev. 2, 08/2005 MPC9109 Low Voltage 1:18 Clock Distribution Low Voltage 1:18 Clock Chip MPC9109 Distribution Chip The MPC9109 is a 1:18 low voltage clock distribution chip with 2.5 V or 3.3 V LVCMOS output capabilities. The device features the capability to select either a differential LVPECL or an LVCMOS compatible input. The 18 outputs are 2.5 V or 3.3 V LVCMOS compatible and feature the drive strength to drive 50 Ω series or parallel terminated transmission lines. With output-to-output skews of 200 ps, the MPC9109 is ideal as a clock distribution chip for the most demanding of synchronous systems. The 2.5 V outputs also make the device ideal for supplying clocks for a high performance Pentium II™ microprocessor based design. For a higher performance version of the 9109 refer to the MPC940L data sheet. LOW VOLTAGE 1:18 CLOCK DISTRIBUTION CHIP Features • • • • • • LVPECL or LVCMOS clock input 2.5 V LVCMOS outputs for Pentium II microprocessor support 200 ps maximum output-to-output skew @ 3.3 V output Maximum output frequency of 250 MHz @ 3.3 V core 32-lead QFP packaging Dual or single supply device: • Dual VCC supply voltage, 3.3 V core and 2.5 V output • Single 3.3 V VCC supply voltage for 3.3 V outputs • Single 2.5 V VCC supply voltage for 2.5 V I/O Functional Description FA SUFFIX 32-LEAD LQFP PACKAGE CASE 873A-04 AC SUFFIX 32-LEAD LQFP PACKAGE Pb-FREE PACKAGE CASE 873A-04 With a low output impedance (≈20 Ω), in both the HIGH and LOW logic states, the output buffers of the MPC9109 are ideal for driving series terminated transmission lines. With a 20 Ω output impedance the 9109 has the capability of driving two series terminated lines from each output. This gives the device an effective fanout of 1:36. If a lower output impedance is desired please see the MPC942 data sheet. If better performance is desired please see the MPC940L data sheet. The differential LVPECL inputs of the MPC9109 allow the device to interface directly with a LVPECL fanout buffer like the MC100EP111 to build very wide clock fanout trees or to couple to a high frequency clock source. The LVCMOS input provides a more standard interface for applications requiring only a single clock distribution chip at relatively low frequencies. In addition, the two clock sources can be used to provide for a test clock interface as well as the primary system clock. A logic HIGH on the LVCMOS_CLK_Sel pin will select the LVCMOS level clock input. All inputs of the MPC9109 have internal pullup/pulldown resistor so they can be left open if unused. The MPC9109 is a single or dual supply device. The device power supply offers a high degree of flexibility. The device can operate with a 3.3 V core and 3.3 V output, a 3.3 V core and 2.5 V outputs as well as a 2.5 V core and 2.5 V outputs. The 32lead QFP package was chosen to optimize performance, board space and cost of the device. The 32-lead TQFP has a 7x7mm body size with a conservative 0.8 mm pin spacing. Pentium II is a trademark of Intel Corporation. IDT™ Low Voltage 1:18 Clock Distribution Chip MPC9109 © Freescale Semiconductor, Inc., has 2005. All rights reserved. Freescale Timing Solutions Organization been acquired by Integrated Device Technology, Inc 1 MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM PECL_CLK PECL_CLK 0 LVCMOS_CLK 1 Q0 16 LVCMOS_CLK_Sel (INTERNAL PULLDOWN) Q1–Q16 Q17 Q6 Q7 Q8 VCCI Q9 Q10 Q11 GND Figure 1. Logic Diagram 24 23 22 21 20 19 18 17 GNDO 25 16 VCCO Q5 26 15 Q12 LVCMOS CLK_Sel Input 14 Q13 0 PECL_CLK 13 Q14 1 LVCMOS_CLK Table 1. Function Table Q4 27 Q3 28 VCCO 29 12 GNDO Q2 30 11 Q15 Supply Pin Voltage Level Q1 31 10 Q16 VCCI 2.5 V or 3.3 V ± 5% Q17 VCCO 2.5 V or 3.3 V ± 5% 9 1 2 3 4 5 6 7 8 GNDI LVCMOS_CLK LVCMOS_CLK_Sel PECL_CLK PECL_CLK VCCI VCCO 32 GNDO Q0 MPC9109 Table 2. Power Supply Voltages Figure 2. Pinout: 32-Lead TQFP (Top View) MPC9109 IDT™ Low Voltage 1:18 Clock Distribution Chip Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 2 2 MPC9109 Advanced Clock Drivers Devices Freescale Semiconductor MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM Table 3. Absolute Maximum Ratings(1) Symbol VCC Parameter Min Max Unit Supply Voltage –0.3 3.6 V VI Input Voltage –0.3 VCC + 0.3 V IIN Input Current ±20 mA 125 °C TStor Storage Temperature Range –40 1. Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied. Table 4. DC Characteristics (TA = 0° to 70°C, VCCI = 3.3 V ± 5%; VCCO = 3.3 V ± 5%) Symbol Characteristic Min Typ Unit VCCI V 0.8 V VIH Input HIGH Voltage CMOS_CLK VIL Input LOW Voltage CMOS_CLK VPP Peak-to-Peak Input Voltage PECL_CLK 500 1000 mV Common Mode Range PECL_CLK VCC–1.4 VCC–0.6 V VCMR VOH Output HIGH Voltage VOL Output LOW Voltage 2.4 Max 2.4 V IOH = –20 mA 0.5 V IOH = 20 mA ±200 µA IIN Input Current CIN Input Capacitance 4.0 pF Cpd Power Dissipation Capacitance 10 pF ZOUT ICC Output Impedance 18 Maximum Quiescent Supply Current 23 Condition 28 0.5 Per output Ω mA Table 5. AC Characteristics (TA = 0° to 70°C, VCCI = 3.3 V ± 5%; VCCO = 3.3 V ± 5%) Symbol Characteristic Min Typ Max Unit Condition 250 MHz 3.8 3.3 ns Note(1) Fmax Maximum Input Frequency tPLH Propagation Delay PECL_CLK CMOS_CLK tsk(o) Output-to-Output Skew PECL_CLK CMOS_CLK 200 200 ps Note(1) tsk(pr) Part-to-Part Skew PECL_CLK CMOS_CLK 2.0 1.7 ns Note(1) dt tr, tf 1.8 1.6 2.8 2.5 Duty Cycle 45 55 % Note(1) Output Rise/Fall Time 0.1 1.3 ns Note(1) 1. Guaranteed by statistical analysis, not 100% tested in production. IDT™ Low Voltage 1:18 Clock Distribution Chip Advanced Clock Drivers Devices has been acquired by Integrated Device Technology, Inc Freescale Timing Solutions Organization Freescale Semiconductor 3 MPC9109 MPC9109 3 MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM Table 6. Absolute Maximum Ratings(1) Symbol VCC Parameter Min Max Unit Supply Voltage –0.3 3.6 V VI Input Voltage –0.3 VCC + 0.3 V IIN Input Current ±20 mA 125 °C TStor Storage Temperature Range –40 1. Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied. Table 7. DC Characteristics (TA = 0° to 70°C, VCCI = 3.3 V ± 5%; VCCO = 2.5 V ± 5%) Symbol Characteristic Min Typ Unit VCCI V 0.8 V VIH Input HIGH Voltage CMOS_CLK VIL Input LOW Voltage CMOS_CLK VPP Peak-to-Peak Input Voltage PECL_CLK 500 1000 mV Common Mode Range PECL_CLK VCC–1.4 VCC–0.6 V VCMR VOH Output HIGH Voltage VOL Output LOW Voltage 2.4 Max 1.8 V IOH = –20 mA 0.5 V IOH = 20 mA ±200 µA IIN Input Current CIN Input Capacitance 4.0 pF Cpd Power Dissipation Capacitance 10 pF ZOUT ICC Condition Output Impedance 23 Ω Maximum Quiescent Supply Current 0.5 mA Per output Table 8. AC Characteristics (TA = 0° to 70°C, VCCI = 3.3 V ± 5%; VCCO = 2.5 V ± 5%) Symbol Characteristic Min Typ Max Unit Condition 250 MHz 3.9 3.4 ns Note(1) Fmax Maximum Input Frequency tPLH Propagation Delay PECL_CLK CMOS_CLK tsk(o) Output-to-Output Skew PECL_CLK CMOS_CLK 250 250 ps Note(1) tsk(pr) Part-to-Part Skew PECL_CLK CMOS_CLK 2.1 1.8 ns Note(1) dt tr, tf 1.8 1.6 2.8 2.5 Duty Cycle 45 55 % Note(1) Output Rise/Fall Time 0.1 1.3 ns Note(1) 1. Guaranteed by statistical analysis, not 100% tested in production. MPC9109 IDT™ Low Voltage 1:18 Clock Distribution Chip Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 4 4 MPC9109 Advanced Clock Drivers Devices Freescale Semiconductor MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM Table 9. Absolute Maximum Ratings(1) Symbol VCC Parameter Min Max Unit Supply Voltage –0.3 3.6 V VI Input Voltage –0.3 VCC + 0.3 V IIN Input Current ±20 mA 125 °C TStor Storage Temperature Range –40 1. Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied. Table 10. DC Characteristics (TA = 0° to 70°C, VCCI = 2.5 V ± 5%; VCCO = 2.5 V ± 5%) Symbol Characteristic Min Typ Unit VCCI V 0.8 V VIH Input HIGH Voltage CMOS_CLK VIL Input LOW Voltage CMOS_CLK VPP Peak-to-Peak Input Voltage PECL_CLK 500 1000 mV Common Mode Range PECL_CLK VCC–1.0 VCC–0.6 V VCMR VOH Output HIGH Voltage VOL Output LOW Voltage 2.0 Max 1.8 V IOH = –12 mA 0.5 V IOH = 12 mA ±200 µA IIN Input Current CIN Input Capacitance 4.0 pF Cpd Power Dissipation Capacitance 10 pF ZOUT ICC Output Impedance 18 Maximum Quiescent Supply Current 23 Condition 28 0.5 Per output Ω mA Table 11. AC Characteristics (TA = 0° to 70°C, VCCI = 2.5 V ± 5%; VCCO = 2.5 V ± 5%) Symbol Characteristic Min Typ Max Unit Condition 200 MHz 4.9 4.2 ns Note(1) Fmax Maximum Input Frequency tPLH Propagation Delay PECL_CLK CMOS_CLK tsk(o) Output-to-Output Skew PECL_CLK CMOS_CLK 250 250 ps Note(1) tsk(pr) Part-to-Part Skew PECL_CLK CMOS_CLK 2.7 2.2 ns Note(1) dt tr, tf 2.2 2.0 2.8 2.5 Duty Cycle 45 55 % Note(1) Output Rise/Fall Time 0.1 1.3 ns Note(1) 1. Guaranteed by statistical analysis, not 100% tested in production. IDT™ Low Voltage 1:18 Clock Distribution Chip Advanced Clock Drivers Devices has been acquired by Integrated Device Technology, Inc Freescale Timing Solutions Organization Freescale Semiconductor 5 MPC9109 MPC9109 5 MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM PACKAGE DIMENSIONS PAGE 1 OF 3 CASE 873A-04 ISSUE C 32-LEAD LQFP PACKAGE MPC9109 IDT™ Low Voltage 1:18 Clock Distribution Chip Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 6 6 MPC9109 Advanced Clock Drivers Devices Freescale Semiconductor MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM PACKAGE DIMENSIONS PAGE 2 OF 3 CASE 873A-04 ISSUE C 32-LEAD LQFP PACKAGE IDT™ Low Voltage 1:18 Clock Distribution Chip Advanced Clock Drivers Devices has been acquired by Integrated Device Technology, Inc Freescale Timing Solutions Organization Freescale Semiconductor 7 MPC9109 MPC9109 7 MPC9109 Low Voltage 1:18 Clock Distribution Chip NETCOM PACKAGE DIMENSIONS PAGE 3 OF 3 CASE 873A-04 ISSUE C 32-LEAD LQFP PACKAGE MPC9109 IDT™ Low Voltage 1:18 Clock Distribution Chip Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc 8 8 MPC9109 Advanced Clock Drivers Devices Freescale Semiconductor MPC9109 MPC92459 PART NUMBERS 900 Low MHz Voltage Low1:18 Voltage Clock LVDS Distribution Clock Synthesizer Chip TITLE INSERT PRODUCT NAME AND DOCUMENT NETCOM NETCOM Innovate with IDT and accelerate your future networks. Contact: www.IDT.com For Sales For Tech Support 800-345-7015 408-284-8200 Fax: 408-284-2775 [email protected] 480-763-2056 Corporate Headquarters Asia Pacific and Japan Europe Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 (outside U.S.) Integrated Device Technology Singapore (1997) Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 IDT Europe, Limited Prime House Barnett Wood Lane Leatherhead, Surrey United Kingdom KT22 7DE +44 1372 363 339 © 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA XX-XXXX-XXXXX