VERIFICATION OF COMPLIANCE This Verification of Compliance is hereby issued to the product designated below. Product DC to DC Converter Model MSHU100 Series, MSDEU02-HI Series, MDHU100 Series, MDEU02-HI Series Brand Applicant MINMAX TECHNOLOGY CO., LTD. No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702, Taiwan, R.O.C Manufacturer MINMAX TECHNOLOGY CO., LTD. No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702, Taiwan, R.O.C Applicable Standard(s) EN 55022: 2010+AC: 2011, Class A EN 55024: 2010 IEC 61000-4-2: 2008 IEC 61000-4-3: 2010 IEC 61000-4-4: 2012 IEC 61000-4-5: 2014 IEC 61000-4-6: 2013 IEC 61000-4-8: 2009 Reference No. T150817N12-E2 Test Laboratory Compliance Certification Services Inc. (Tainan Lab.) No.8,Jiucengling, Xinhua Dist., Tainan City 712, Taiwan (R.O.C.) This device has been tested and found to comply with the stated standard(s), which is (are) required by the Council Directive of 2004/108/EC* and 2014/30/EU. The test results are indicated in the test report and are applicable only to the tested sample identified in the report. Note: The above EN basic standards are applied with latest version if customer has no special requirement. *: Directive 2004/108/EC is repealed with effect from 20 April 2016. Jeter Wu / Assistant Manager Tainan Lab. Date: September 21, 2015 EC-Declaration of Conformity The following equipment: DC to DC Converter ( Product Name ) MSHU100 Series, MSDEU02-HI Series, MDHU100 Series, MDEU02-HI Series / ( Model Designation / Brand Name ) MINMAX TECHNOLOGY CO., LTD. ( Manufacturer Name ) No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702, Taiwan, R.O.C ( Manufacturer Address ) is hereby confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive (2004/108/EC* and 2014/30/EU (*: Directive 2004/108/EC is repealed with effect from 20 April 2016)). For the evaluation regarding the Electromagnetic Compatibility (2004/108/EC and 2014/30/EU) the following standards are applied: EN 55022: 2010+AC: 2011, Class A EN 55024: 2010 IEC 61000-4-2: 2008 IEC 61000-4-3: 2010 IEC 61000-4-4: 2012 IEC 61000-4-5: 2014 IEC 61000-4-6: 2013 IEC 61000-4-8: 2009 The following manufacturer / importer or authorized representative established within the EUT is responsible for this declaration: ( Company Name ) ( Company Address ) Person responsible for making this declaration: ( Name, Surname ) ( Position / Title ) ( Place ) ( Date ) ( Legal Signature )