IDT QS4A205Q

IDTQS4A205
HIGH-PERFORMANCE CMOS ANALOG FOUR-CHANNEL SPDT MUX/DEMUX
INDUSTRIAL TEMPERATURE RANGE
QUICKSWITCH® PRODUCTS
HIGH-PERFORMANCE CMOS
ANALOG FOUR-CHANNEL
SPDT MUX/DEMUX
IDTQS4A205
FEATURES:
DESCRIPTION:
•
•
•
•
•
•
•
•
•
•
The QS4A205 is a high-performance CMOS analog Four-Channel
SPDT multiplexer/demultiplexer with individual enables. The low Onresistance of the QS4A205 allows inputs to be connected to outputs with low
insertion loss and high bandwidth. TTL-compatible control circuitry with
“Break-Before-Make” feature prevents contention.
The QS4A205 with 830MHz bandwidth makes it ideal for high-performance video signal switching, audio signal switching, and telecomm routing
applications. High performance and low power dissipation makes this
device ideal for battery operated and remote instrumentation applications.
The QS4A205 is offered in the QSOP package and has several advantages over conventional packages such as PDIP and SOIC including:
• Reduced signal delays due to denser component packaging on circuit
boards
• Reduced system noise due to less pin inductance resulting in lower
ground bounce
Ω
Low ON resistance: rDS(ON) = 5Ω
Fast transition time: tTRAN = 6ns
Wide bandwidth: 830MHz (-3dB point)
Crosstalk: -115dB at 50KHz, -100dB at 5MHz, -66dB at 30MHz
Off-isolation: -90dB at 50KHz, -60dB at 5MHz, -50dB at 30MHz
Single 5V supply
Can be used as multiplexer or demultiplexer
TTL-compatible control inputs
μA
Ultra-low quiescent current: 3μ
Available in QSOP package
APPLICATIONS:
•
•
•
•
•
•
•
•
•
High-speed video signal switching/routing
HDTV-quality video signal routing
Audio signal switching/routing
Data acquisition
ATE systems
Telecomm routing
Switch between multiple video sources
Token Ring transceivers
High-speed networking
The QS4A205 is characterized for operation at -40°C to +85°C.
FUNCTIONAL BLOCK DIAGRAM
I0A
YA
I1A
I0B
YB
I1B
I0C
YC
I1C
I0D
YD
I1D
S
E
CO NTROL
LOG IC
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
OCTOBER 2008
1
c
2000 Integrated Device Technology, Inc.
DSC-5551/3
IDTQS4A205
HIGH-PERFORMANCE CMOS ANALOG FOUR-CHANNEL SPDT MUX/DEMUX
INDUSTRIAL TEMPERATURE RANGE
ABSOLUTE MAXIMUM RATINGS(1)
PIN CONFIGURATION
Symbol
Description
VTERM(2)
Max
Unit
Supply Voltage to Ground
–0.5 to +7
V
S
1
16
VCC
VTERM(3)
DC Switch Voltage VS
–0.5 to +7
V
I0A
2
15
E
—
Analog Input Voltage
–0.5 to +7
V
VTERM(3)
DC Input Voltage VIN
–0.5 to +7
V
VAC
AC Input Voltage (pulse width ≤20ns)
–3
V
IOUT
DC Output Current
120
mA
PMAX
Maximum Power Dissipation
0.7
W
TSTG
Storage Temperature
–65 to +150
°C
I1A
3
14
I0D
YA
4
13
I1D
I0B
5
12
YD
I1B
6
11
I0C
YB
7
10
I1C
GND
8
9
YC
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
2. VCC terminals.
3. All terminals except VCC .
CAPACITANCE (TA = +25°C, f = 1MHz, VIN = 0V, VOUT = 0V)
QSOP
TOP VIEW
Symbol
Parameter(1)
Conditions
CMUX (OFF)
MUX Off
Capacitance
E = VCC, VIN = VOUT = 0V
5.6
−
pF
CDEMUX (OFF) DEMUX Off
Capacitance
E = VCC, VIN = VOUT = 0V
7.4
−
pF
CMUX (ON)
MUX On
Capacitance
E = 0V, VIN = VOUT = 0V
12
−
pF
CDEMUX (ON)
DEMUX On
Capacitance
E = 0V, VIN = VOUT = 0V
15
−
pF
Typ. Max. Unit
NOTE:
1. As applicable to the device type.
PIN DESCRIPTION
Pin Names
I/O
Description
IxA
I/O
Demux Port A
IxB
I/O
Demux Port B
Enable
Select
IxC
I/O
Demux Port C
E
S
YA
YB
YC
YD
Function
IxD
I/O
Demux Port D
H
X
Z
Z
Z
Z
Disable
E
I
Enable Input
L
L
I0A
I0B
I0C
I0D
Select 0
S
I
Select Input
YA-YD
I/O
L
H
I1A
I1B
I1C
I1D
Select 1
FUNCTION TABLE(1)
Mux Port A-D
MUX/DEMUX Ports
NOTE:
1. H = HIGH Voltage Level
L = LOW Voltage Level
X = Don't Care
Z = High-Impedance
2
IDTQS4A205
HIGH-PERFORMANCE CMOS ANALOG FOUR-CHANNEL SPDT MUX/DEMUX
INDUSTRIAL TEMPERATURE RANGE
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Industrial: TA = –40°C to +85°C, VCC = 5V ± 5%
Symbol
Parameter
Test Conditions
Min.
Typ.(1) Max.
Unit
Analog Switch
VIN
Analog Signal Range(2)
rDS(ON)
Drain-source ON resistance(2,3)
IC(OFF)
Channel Off Leakage Current
IC(ON)
Channel On Leakage Current
–0.5
1
Vcc - 1
V
—
5
7
Ω
Vcc = Min., VIN = 2.4V, ION = 15mA
—
13
17
IN = Vcc or 0V; YN = 0V or Vcc; E = Vcc
—
2
—
nA
IN = YN = 0V
—
2
—
nA
Vcc = Min., VIN = 0V, ION = 30mA
(each channel is turned on sequentially)
Digital Control
VIH
Input HIGH Voltage
Guaranteed Logic HIGH for Control Pins
2
—
—
V
VIL
Input LOW Voltage
Guaranteed Logic LOW for Control Pins
—
—
0.8
V
Dynamic Characteristics
tTRANS
Switching Time of MUX S to Y
RL = 1KΩ, CL = 100pF
0.5
—
6.6
ns
tON(EN)
Enable Turn-On Time, E to Y
RL = 1KΩ, CL = 100pF
0.5
—
6
ns
tOFF(EN)
Enable Turn-Off Time, E to Y
RL = 1KΩ, CL = 100pF
0.5
—
6
ns
tPD
Group Delay(2,4)
RL = 1KΩ, CL = 100pF
—
—
250
ps
f3dB
-3dB Bandwidth
VIN = 1Vp-p, RL = 75Ω
—
830
—
MHz
Off-isolation
VIN = 1Vp-p, RL = 75Ω, f = 5MHz
—
-60
—
dB
Crosstalk
VIN = 1Vp-p, RL = 75Ω, f = 5MHz
—
-100
—
dB
—
1.5
—
pC
XTALK
QCI
Charge Injection
NOTES:
1. Typical values are at VCC = 5.0V, TA = 25°C.
2. Max value is guaranteed but not production tested.
3. Measured by voltage drop between A and C pins or B and D pins at indicated current through the switch. ON resistance is determined by the lower of the voltages on the
two (A, C, or B, D) pins.
4. The bus switch contributes no group delay other than the RC delay of the ON resistance of the switch and load capacitance. Group delay of the bus switch, when used
in a system, is determined by the driving circuit on the driving side of the switch and its interaction with the load on the driven side.
POWER SUPPLY CHARACTERISTICS
Symbol
ICCQ
Parameter
Quiescent Power
Test Conditions
VCC = Max., VIN = GND or VCC, f = 0
3
Max.
Unit
3
µA
IDTQS4A205
HIGH-PERFORMANCE CMOS ANALOG FOUR-CHANNEL SPDT MUX/DEMUX
INDUSTRIAL TEMPERATURE RANGE
TYPICAL CHARACTERISTICS
150
60
V CC = 5 V
R L = 75
120
40
90
Crosstalk
Crosstalk
(dB )
(dB)
V CC = 5V
R L = 75 Ω
50
Off-isolation
60
30
O ff-isolation
20
30
10
0
1K
10K
100K
1M
10M
100M
0
1G
100M 200M
300M
Frequency (H z)
400M
500M
600M 700M
Freque ncy (H z)
Off-isolation and Crosstalk vs. Frequency
Off-isolation and Crosstalk vs. Frequency
NOTES:
1. Crosstalk = 20 log |VO/VS|
2. Off-isolation = 20 log |VO/VS|
NOTES:
1. Crosstalk = 20 log |VO/VS|
2. Off-isolation = 20 log |VO/VS|
4
160
V CC = 5V
R L = 75 Ω
Crosstalk
140
2
R L = 1K Ω
0
(dB)
(dB )
120
100
2
Off-isolation
R L = 75 Ω
V CC = 5V
80
4
60
6
1K
40
10K
20K
30K
40K
50K
60K
10K
100K
1M
10M
Frequency (H z)
70K
Frequency (H z)
Off-isolation and Crosstalk vs. Frequency
Insertion Loss vs. Frequency
NOTES:
1. Crosstalk = 20 log |VO/VS|
2. Off-isolation = 20 log |VO/VS|
NOTE:
1. Insertion Loss = 20 log |VO/VS|
4
100M
1G
IDTQS4A205
HIGH-PERFORMANCE CMOS ANALOG FOUR-CHANNEL SPDT MUX/DEMUX
INDUSTRIAL TEMPERATURE RANGE
TYPICAL CHARACTERISTICS (CONTINUED)
18
2
R L = 1K Ω
16
r DS (On) - Drain Source On-resistance(Ω )
1
(dB )
0
1
R L = 75 Ω
V CC = 5V
2
3
4
100M 200M
300M 400M 500M 600M 700M
800M
900M
Frequency (H z)
14
12
VCC = 4.75V
10
8
6
4
Insertion Loss vs. Frequency
0.0
0.5
1.0
1.5
2.0
2.5
3.0
VIN (Volts)
NOTE:
1. Insertion Loss = 20 log |VO/VS|
RON LINK
On-Resistance vs. VIN
TEST CIRCUITS
5V
3.0V
VCC
0V
E
QS4A205
VIN
S
50 Ω
GND
I0A
I1A
I0B, I1B
I0C, I1C
I0D, I1D
YD
YC
YB
YA
500 Ω
SELECT
INPUT
5V
1.5V
0V
tTRANS
VOUT
SWITCH
OUTPUT
50pF
Transition Time
5
tTRANS
1.5V
IDTQS4A205
HIGH-PERFORMANCE CMOS ANALOG FOUR-CHANNEL SPDT MUX/DEMUX
INDUSTRIAL TEMPERATURE RANGE
TEST CIRCUITS (CONTINUED)
5V
3.0V
VCC
0V
I0A
I1A
I0B, I1B
I0C, I1C
I0D, I1D
YD
YC
YB
YA
S
VIN
E
QS4A205
GND
50Ω
CONTROL
INPUT
1.5V
0V
5V
tON(EN)
OUTPUT
0.3V
OUTPUT
0.3V
VOUT
500
50pF
tOFF(EN)
Enable Switching Time
+5V
VS
+5V
VIN
Vcc
I0A
Vcc
I0A
IxA
RS = 50Ω
YO
YA
QS4A205
QS4A205
IxD
RL
75Ω
S
E
S
RS = 50Ω
GND
Insertion Loss
NOTE:
1. Crosstalk = 20 log |VO/VS|
+5V
Vcc
IxA
VS
IxD
RL
75Ω
RS = 50Ω
S
YO
YA
QS4A205
E
GND
+5V
Off-Isolation
NOTE:
1. Off-isolation = 20 log |VO/VS|
6
YO
RL
75Ω
E
GND
Crosstalk
NOTE:
1. Insertion Loss = 20 log |VO/VS|
YA
IDTQS4A205
HIGH-PERFORMANCE CMOS ANALOG FOUR-CHANNEL SPDT MUX/DEMUX
INDUSTRIAL TEMPERATURE RANGE
ORDERING INFORMATION
QS
XXXXX
Device Type
XX
Package
CORPORATE HEADQUARTERS
6024 Silver Creek Valley Road
San Jose, CA 95138
Q
QG
Quarter Size Small Outline Package
QSOP - Green
4A205
High Performance CMOS Analog Four-Channel
SPDT MUX/DEMUX
for SALES:
800-345-7015 or 408-284-8200
fax: 408-284-2775
www.idt.com
7
for Tech Support:
[email protected]