TACmicrochip® Low Profile FEATURES • • • • The world’s smallest surface mount tantalum capacitor CV range: 1.0-100μF / 2-16V 6 case sizes available in low profile option Industrial and hi-rel medical applications LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • Industrial portable applications L CASE DIMENSIONS: millimeters (inches) POLARITY BAND NOT TO EXCEED CENTER LINE H S Lt W MARKING H, I, J, T, U, V CASE Polarity Band (Anode+) HOW TO ORDER TAC U Type TACmicrochip® Case Size See table above EIA Code EIA Metric L+0.20 (0.008) -0.00 (0.000) W+0.15 (0.006) -0.00 (0.000) %H 0805 2012-10 I 1206 3216-05 %J 0603 1608-08 2.00 (0.079) 3.20±0.20 (0.126±0.008) 1.60 (0.063) 1.35 (0.053) 1.60±0.20 (0.063±0.008) 0.85 (0.033) T 1210 Code 3.50 ± 0.20 (0.138 ± 0.008) 3528-12 %U 0805 2012-06 V 1206 3216-08 2.00 (0.079) 3.20 ± 0.20 (0.126 ±0.008) 2.80 +0.20 -0.10 +0.008 (0.110 -0.004 ) 1.35 (0.053) 1.60 ± 0.20 (0.063 ± 0.008) Termination Spacing(S) Minimum Termination Length (Lt) 1.00 (0.039) 0.70 (0.028) min 0.15 (0.006) 0.50 (0.020) 1.80 (0.071) min. 0.15 (0.006) 0.75 (0.030) 0.55 (0.022) min 0.15 (0.006) 1.20 (0.047) 2.00 (0.079) min 0.15 (0.006) 0.60 (0.024) 0.70 (0.028) min 0.15 (0.006) 0.75 (0.030) 1.80 (0.071) min 0.15 (0.006) H max 475 * 004 R TA Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance K=±10% M=±20% Rated DC Voltage 002=2Vdc 003=3Vdc 004=4Vdc 006=6.3Vdc 010=10Vdc 016=16Vdc Packaging R = 7" Standard Tin Termination Plastic Tape X = 41⁄4" Standard Tin Termination Plastic Tape A = 7" Gold Termination Plastic Tape F = 41⁄4" Gold Termination Plastic Tape Alternative characters may be used for special requirements TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: Termination Finish: 48 ⱕ +85°C: ⱕ +125°C: ⱕ +85°C: ⱕ +125°C: All technical data relate to an ambient temperature of +25°C 0.1 μF to 100 μF ±10%; ±20% 0.01CV or 0.5μA whichever is the greater 2 3 4 6.3 10 16 1.3 2 2.7 4 7 10 2.7 3.9 5.2 8 13 20 1.7 2.6 3.2 5 8 12 -55°C to +125°C 1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level Nickel and Tin Plating (standard), Nickel and Gold Plating option available upon request 050916 TACmicrochip® Low Profile CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 2.0V 105 155 225 335 475 685 106 156 226 336 476 686 107 3.0V Voltage Rating DC (VR ) at 85°C 4.0V 6.3V 10V 16V U U U U U J I H H H/V V H H T T T Available Ratings Standard Height Profile: A, B, K, L, R Case Low Profile: H, I, J, T, U, V Case Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE AVX Part No. Case Capacitance Size (μF) Rated Voltage (V) Rated Category Category DCL Temperature Voltage Temperature Max. (ºC) (V) (ºC) (μA) TACU106*002#TA U 10 2 85 TACH476*003#TA H 47 3 85 TACU475*004#TA TACJ106*004#TA TACH336*004#TA U J H 4.7 10 33 4 4 4 85 85 85 TACU335*006#TA TACI106*006#TA TACH156*006#TA TACH226*006#TA TACT686*006#TA TACT107*006#TA U I H H T T 3.3 10 15 22 68 100 6.3 6.3 6.3 6.3 6.3 6.3 85 85 85 85 85 85 TACU225*010#TA TACH106*010#TA TACV106*010#TA TACV156*010#TA TACT476*010#TA U H V V T 2.2 10 10 15 47 10 10 10 10 10 85 85 85 85 85 TACU105*016#TA U 1 16 85 2 Volt @ 85°C 125 0.5 3 Volt @ 85°C 2 125 1.4 4 Volt @ 85°C 2.7 125 0.5 2.7 125 0.5 2.7 125 1.3 6.3 Volt @ 85°C 4 125 0.5 4 125 0.6 4 125 0.9 4 125 1.4 4 125 4.3 4 125 6.3 10 Volt @ 85°C 7 125 0.5 7 125 1.0 7 125 1.0 7 125 1.5 7 125 4.7 16 Volt @ 85°C 10 125 0.5 1.3 DF Max. (%) ESR Max. @ 100kHz (Ω) MSL 8 5 20 100kHz RMS Current (mA) Product Category 25ºC 85ºC 125ºC 1 84 75 33 1 5 1 89 80 36 3 8 20 14 5 7.5 5 1 1 1 84 52 89 75 46 80 33 21 36 1 3 2 8 20 8 10 15 12 5 5 5 5 1 1 1 1 1 1 1 1 84 84 89 89 200 200 75 75 80 80 180 180 33 33 36 36 80 80 1 2 3 2 2 2 8 8 10 10 12 5 5 2 2 1 1 1 1 1 1 84 89 132 132 200 75 80 119 119 180 33 36 53 53 80 1 2 2 2 1 8 5 1 84 75 33 1 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. For typical weight and composition see page 223. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. 050916 49 TACmicrochip® Low Profile QUALIFICATION TABLE – CATEGORY 1 TEST Endurance Humidity Temperature Stability Surge Voltage TAC low profile series (Temperature range -55ºC to +125ºC) Condition Characteristics Visual examination no visible damage Determine after application of rated voltage for 2000 +48/-0 hours at 85±2ºC and then leaving 1-2 hours DCL 1.25 x initial limit at room temperature. Also determine of 125ºC temΔC/C within ±10% of initial value perature, category voltage for 2000 +48/-0 hours and then leaving 1-2 hours at room temperature. DF 1.5 x initial limit Power supply impedance to be ≤0.1Ω/V. ESR 1.5 x initial limit Visual examination no visible damage Determine after storage without applied voltage at DCL initial limit 40±2ºC and 90-95% relative humidity for 1344 ΔC/C within ±5% of initial value +48/-0 hours and then recovery 1-2 hours at room temperature DF 1.2 x initial limit ESR 1.2 x initial limit Step 1 2 3 4 5 6 Temperature°C +20±2 -55+0/-3 +20±2 +85+3/-0 +125+3/-0 +20±2 Duration(min) 15 15 15 15 15 15 Test temperature: 85ºC+3/0ºC Test voltage: 1.3 x rated voltage Series protection resistance 1000±100Ω Discharge resistance: 1000Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge DCL ΔC/C DF ESR Visual examination DCL ΔC/C DF ESR +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC IL* n/a IL* 10 x IL* 12.5 x IL* IL* n/a +0/-10% ±5% +10/-0% +15/-0% ±5% IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* IL* 1.25 x IL* IL* 1.25 x IL* 2 x IL* IL* no visible damage initial limit within ±10% of initial value initial limit initial limit *Initial Limit QUALIFICATION TABLE – CATEGORY 2 TEST Endurance Humidity Temperature Stability Surge Voltage TAC low profile series (Temperature range -55ºC to +125ºC) Condition Characteristics Visual examination no visible damage Determine after application of rated voltage for 2000 +48/-0 hours at 85±2ºC and then leaving 1-2 hours DCL 1.25 x initial limit at room temperature. Also determine of 125ºC temΔC/C within ±15% of initial value perature, category voltage for 2000 +48/-0 hours and then leaving 1-2 hours at room temperature. DF 1.5 x initial limit Power supply impedance to be ≤0.1Ω/V. ESR 1.5 x initial limit Visual examination no visible damage Determine after storage without applied voltage at DCL initial limit 40±2ºC and 90-95% relative humidity for 1344 ΔC/C within ±10% of initial value +48/-0 hours and then recovery 1-2 hours at room temperature DF 1.2 x initial limit ESR 1.2 x initial limit Step 1 2 3 4 5 6 Temperature°C +20±2 -55+0/-3 +20±2 +85+3/-0 +125+3/-0 +20±2 Duration(min) 15 15 15 15 15 15 Test temperature: 85ºC+3/0ºC Test voltage: 1.3 x rated voltage Series protection resistance 1000±100Ω Discharge resistance: 1000Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC DCL ΔC/C DF IL* n/a IL* 10 x IL* 12.5 x IL* IL* n/a +0/-15% ±5% +15/-0% +20/-0% ±5% IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* ESR IL* 1.25 x IL* IL* 1.25 x IL* 2 x IL* IL* Visual examination DCL ΔC/C DF ESR no visible damage 1.5 x initial limit within ±15% of initial value 1.5 x initial limit 1.5 x initial limit *Initial Limit 50 050916 TACmicrochip® Low Profile QUALIFICATION TABLE – CATEGORY 3 TEST Endurance Humidity Temperature Stability Surge Voltage TAC low profile series (Temperature range -55ºC to +125ºC) Condition Characteristics Visual examination no visible damage Determine after application of rated voltage for 2000 +48/-0 hours at 85±2ºC and then leaving 1-2 hours DCL 1.25 x initial limit at room temperature. Also determine of 125ºC temΔC/C within ±30% of initial value perature, category voltage for 2000 +48/-0 hours and then leaving 1-2 hours at room temperature. DF 1.5 x initial limit Power supply impedance to be ≤0.1Ω/V. ESR 1.5 x initial limit Visual examination no visible damage Determine after storage without applied voltage at DCL 2 x initial limit 40±2ºC and 90-95% relative humidity for 1344 ΔC/C within ±30% of initial value +48/-0 hours and then recovery 1-2 hours at room temperature DF 1.5 x initial limit ESR 1.25 x initial limit Step 1 2 3 4 5 6 Temperature°C +20±2 -55+0/-3 +20±2 +85+3/-0 +125+3/-0 +20±2 Duration(min) 15 15 15 15 15 15 Test temperature: 85ºC+3/0ºC Test voltage: 1.3 x rated voltage Series protection resistance 1000±100Ω Discharge resistance: 1000Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge DCL ΔC/C DF ESR Visual examination DCL ΔC/C DF ESR +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC IL* n/a IL* 10 x IL* 12.5 x IL* IL* n/a +0/-25% ±5% +20/-0% +25/-0% ±20% IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* 1.5 x IL* IL* 1.25 x IL* IL* 1.25 x IL* 2 x IL* 1.5 x IL* no visible damage 2 x initial limit within ±30% of initial value 2 x initial limit 2 x initial limit *Initial Limit 050916 51