915 MHz SAW Filter 26 MHz Bandwidth Part Number: SF0915BA02502S DESCRIPTION • • • 915 MHz SAW bandpass filter with 26 MHz bandwidth. 3 x 3 mm ceramic LCC package. RoHS compliant. TYPICAL PERFORMANCE IDT • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Ph 1-508-852-5400 • Fax 1-508-852-8456 www.idt.com SF0915BA02502S Rev B 8-Aug-2008 ECN 36038 Page 1 of 3 915 MHz SAW Filter 26 MHz Bandwidth Part Number: SF0915BA02502S SPECIFICATION Parameter 1 Center Frequency (FC) Bandwidth (3dB) 2 Insertion Loss 2 Passband Amplitude Ripple Stopband Rejection, 10-800 MHz Stopband Rejection, 800-845 MHz Stopband Rejection, 845-880 MHz Stopband Rejection, 947-992 MHz Stopband Rejection, 992-1020 MHz Stopband Rejection, 1020-1200 MHz Temperature Coefficient of Frequency Source and Load Impedance Notes: Min 26 50 45 35 15 35 45 Typ 915.0 34 2.8 1.1 55 50 40 18 40 50 -30 50 Max 3.3 1.5 - Units MHz MHz dB dB dB dB dB dB dB dB ppm/°K Ω//0nF 1. Fixed reference point. 2. Evaluated over 902 to 928 MHz. MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Range Input Power Level DC Voltage Min Max -40 -10 - 85 70 10 10 Units ˚C ˚C dBm Volts MATCHING CIRCUIT Notes: 1. Matching components are not required; 50 ohm single-ended system. IDT • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Ph 1-508-852-5400 • Fax 1-508-852-8456 www.idt.com SF0915BA02502S Rev B 8-Aug-2008 ECN 36038 Page 2 of 3 915 MHz SAW Filter 26 MHz Bandwidth Part Number: SF0915BA02502S PACKAGE OUTLINE SUGGESTED FOOTPRINT Units: mm Typical tolerances are ±0.15 mm except where indicated. Pad Configuration: Input: Output: Ground: 2 5 1,3,4,6 Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating MARKING ISO 9001 Registered All specifications are believed to be accurate and reliable. However, MNC reserves the right to make changes without notice. © 2006 All rights reserved. IDT • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Ph 1-508-852-5400 • Fax 1-508-852-8456 www.idt.com SF0915BA02502S Rev B 8-Aug-2008 ECN 36038 Page 3 of 3