Certificate of Compliance Certificate: 2518506 Master Contract: 231746 Project: 2518506 Date Issued: June 4, 2012 Issued to: MINMAX Technology Co., Ltd. 18 Sin-Sin Road An-Ping Industrial District Tainan, 702 Taiwan Attention: Lester Fang The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C', 'US' and Patric Charbonneau Issued by: Patric Charbonneau, T.P. PRODUCTS CLASS 5311 91 CLASS 5311 11 - POWER SUPPLIES - Component Type(UL 60950-1-2nd Ed)Certified to U.S.Stds - POWER SUPPLIES - Component Type(CSA 60950-1-07-2nd Ed) Component type DC/DC Converter*, Models and Ratings as follow: Model Rated input current Output voltage Output current [mA] [Vdc] [mA] MxDWI03 Series(1) INPUT: Nominal: 24Vdc MxDWI03-24S033 MxDWI03-24S05 MxDWI03-24S12 MxDWI03-24S15 MxDWI03-24S24 DQD 507 Rev. 2012-05-22 - Range: 9-36Vdc - Recommended input fuse: 1500mA 110 3,3 600 160 5,0 600 160 12 250 160 15 200 160 24 125 Page: 1 Certificate: 2518506 Master Contract: 231746 Project: 2518506 Date Issued: June 4, 2012 MxDWI03-24D05 MxDWI03-24D12 MxDWI03-24D15 INPUT: Nominal: 48Vdc MxDWI03-48S033 MxDWI03-48S05 MxDWI03-48S12 MxDWI03-48S15 MxDWI03-48S24 MxDWI03-48D05 MxDWI03-48D12 MxDWI03-48D15 160 160 160 ±5 ±12 ±15 ±300 ±125 ±100 - Range: 18-75Vdc - Recommended input fuse: 800mA 55 3,3 600 80 5,0 600 80 12 250 80 15 200 80 24 125 80 ±5 ±300 80 ±12 ±125 80 ±15 ±100 MxGWI06 Series(1) INPUT: Nominal: 24Vdc MxGWI06-24S033 MxGWI06-24S05 MxGWI06-24S12 MxGWI06-24S15 MxGWI06-24S24 MxGWI06-24D05 MxGWI06-24D12 MxGWI06-24D15 - Range: 9-36Vdc - Recommended input fuse: 1500mA 260 3,3 1450 300 5,0 1200 300 12 500 300 15 400 300 24 250 300 ±5 ±600 300 ±12 ±250 300 ±15 ±200 INPUT: Nominal: 48Vdc MxGWI06-48S033 MxGWI06-48S05 MxGWI06-48S12 MxGWI06-48S15 MxGWI06-48S24 MxGWI06-48D05 MxGWI06-48D12 MxGWI06-48D15 - Range: 18-75Vdc - Recommended input fuse: 750mA 130 3,3 1450 150 5,0 1200 150 12 500 150 15 400 150 24 250 150 ±5 ±600 150 ±12 ±250 150 ±15 ±200 MJWI10(2) Series INPUT: Nominal: 24Vdc - Range: 9-36Vdc - Recommended input fuse: 2000mA MJWI10-24S033 400 3,3 2200 MJWI10-24S05 500 5,0 2000 DQD 507 Rev. 2012-05-22 Page: 2 Certificate: 2518506 Master Contract: 231746 Project: 2518506 Date Issued: June 4, 2012 MJWI10-24S051 MJWI10-24S12 MJWI10-24S15 MJWI10-24S24 MJWI10-24D05 MJWI10-24D12 MJWI10-24D15 INPUT: Nominal: 48Vdc MJWI10-48S033 MJWI10-48S05 MJWI10-48S051 MJWI10-48S12 MJWI10-48S15 MJWI10-48S24 MJWI10-48D05 MJWI10-48D12 MJWI10-48D15 500 500 500 500 500 500 500 5,1 12 15 24 ±5 ±12 ±15 2000 830 660 410 ±1000 ±410 ±330 - Range: 18-75Vdc - Recommended input fuse: 1000mA 200 3,3 2200 250 5,0 2000 250 5,1 2000 250 12 830 250 15 660 250 24 410 250 ±5 ±1000 250 ±12 ±410 250 ±15 ±330 MJWI20(2) Series INPUT: Nominal: 24Vdc MJWI20-24S033 MJWI20-24S05 MJWI20-24S12 MJWI20-24S15 MJWI20-24S24 MJWI20-24D12 MJWI20-24D15 - Range: 9-36Vdc - Recommended input fuse: 5000mA 700 3,3 4500 940 5,0 4000 940 12 1670 940 15 1340 940 24 835 940 ±12 ±835 940 ±15 ±670 INPUT: Nominal: 48Vdc MJWI20-48S033 MJWI20-48S05 MJWI20-48S12 MJWI20-48S15 MJWI20-48S24 MJWI20-48D12 MJWI20-48D15 - Range: 18-75Vdc - Recommended input fuse: 2500mA 350 3,3 4500 470 5,0 4000 470 12 1670 470 15 1340 470 24 835 470 ±12 ±835 470 ±15 ±670 (1) Where ‘x’ is blank for DIP type or “S” for surface-mount components. DQD 507 Rev. 2012-05-22 Page: 3 Certificate: 2518506 Master Contract: 231746 Project: 2518506 Date Issued: June 4, 2012 (2) Model numbers in this series may be followed by “-HS” for components with a heatsink. Notes: • The subject products were evaluated as components where the suitability with the end product shall be reevaluated. • The manufacturer recommends the use of an external input fuse (slow-blow type) as listed for each model above. • The subject products were evaluated to be suitable to have their input connected to SELV or TNV-2 circuits. • Maximum case temperature of the converter not to exceed 105°C in end product (100°C for MJWI10 Series). APPLICABLE REQUIREMENTS CAN/CSA-C22.2 No 60950-1-07 + Am1:2011 - Information Technology Equipment – Safety – Part 1: General requirements UL 60950-1, Second Edition + Am1:2011 requirements DQD 507 Rev. 2012-05-22 - Information Technology Equipment – Safety – Part 1: General Page: 4