Datasheet

OBSOLETE
K1100BA Series
5V Crystal Clock Oscillators
K1100BA, K1150BA, K1125BA, K1110BA Series
14 pin DIP, 4-pin
5.0 Volt,
Clock
Oscillator
K1100BA Series Package,
Compatible
with 14-pin DIL
1.0MHz to 70MHz
Frequency
Range
THIS
PRODUCT
IS NOT RECOMMENDED5V
FOR
NEW
DESIGNS.
Crystal
Clock Oscillators
HCMOS Circuit, TTL/CMOS
Compatible
PLEASE
REFER TO THE MHO+ PRODUCT
SERIES.
Tight
Symmetry
4-pin Package,
Compatible
with(45/55%)
14-pin DILAvailable
Tri-State
OptionRange
Available
1.0MHz to 70MHz
Frequency
±100ppm Stability Standard
HCMOS Circuit,
TTL/CMOS
Compatible
±100ppm
Stability
Standard
Tight Symmetry
(45/55%)
Available
Tighter Stabilities Available
Tri-State Option
Available
±10ppm
Stability:- K1110BA
±25ppm Stability:- K1125BA
Tighter Stabilities Available
±50ppm Stability:- K1150BA
±10ppm Stability:- K1110BA
±25ppm Stability:- K1125BA
±50ppm Stability:- K1150BA
E L E C T R I C A L S P E C I F I C AT I O N S
E L E C T RK1100BA
I C A L S P E C I FK1150BA
I C AT I O N S
MODEL
Frequency Range (MHz)
MODEL
Frequency Stability (ppm)
K1150BA
K1100BA
Frequency Range (MHz)
0°C to 70°C
0°C to 70°C
-40°C to 85°C
K1110BA
Rating Over
Temperature Only
Inclusive of calibration, temperature, voltage, load,
shock,vibration, aging
-40°C to 85°C
Temperature Range (°C)
Storage
K1125BA
Rating Over
Temperature±25
Only
Inclusive of calibration, temperature, voltage, load,
±50
±100 aging
shock,vibration,
±100
±50
±150
±25
±100
±150
±100
NA
Temperature RangeOperating
(°C)
Operating
K1110BA
1.0 to 70
Frequency StabilityOverall
(ppm)
Overall
K1125BA
1.0 to 70
-55°C to +125°C
-55°C to +125°C
Supply Voltage (V)
Supply Voltage (V)
+5.0 ±10%
+5.0 ±10%
Supply
Supply Current
(mA) Current (mA)
N/A
-40°C to +85°C
-40°C to +85°C
Storage
±10
±10 NA
N/A
<20MHz
<20MHz
15
15
20 - 70 MHz
20 - 70 MHz
50
50
Output TTL Output TTL
Symmetry
40/60% @ 1.4V; 45/55%
Optional
40/60%
@ 1.4V; 45/55% Optional
Symmetry
TR and TF (ns)
TR and TF (ns)
Fanout (TTL)
Output CMOS
20MHz =8; > 20MHz = 6
Fanout (TTL)
Output CMOS
Symmetry
TR
Start up Time (ms)
10
40/60 @ 0.5VCC
Symmetry
TR and TF (ns)
20MHz =8; > 20MHz = 6
10
20MHz =10; > 20MHz = 8
and TF (ns)
40/60 @ 0.5VCC
20MHz =10; > 20MHz = 8
<10
Start up Time (ms)
<10
PA R T N U M B E R I N G G U I D E
K11XXBACXXX - Specify Frequency
PART
NUMBERING
PA R
T N U M B E R IGUIDE
NG GUIDE
““Blank”” = 0oC to 70oC Operating Temperature
- Specify Frequency
K11XXBACXXX
K11XXBACXXX-R
- Specify Frequency
““M”” = -40oC to 85oC Operating Temperature
““Blank”” = 0oC to 70oC Operating Temperature
“-R”
=
RoHS
Compliant
““Blank”” = Fixed
Frequency
oC to 85oC Operating Temperature
““M”” = -40
= Non-RoHS
Compliant
““E”” “Blank”
= Tri-State
““Blank””
Fixed Frequency
““Blank””
= 40/60%
“Blank”
= 0°CSymmetry
to 70°C=Operating
Temperature
““S”” “M”
= 45/55
Symmetry
= Tri-State
= -40°C
to““E””
85°C
Operating Temperature
““C”” = CMOS Output““Blank”” = 40/60% Symmetry
“Blank” = Fixed Frequency
Model Selection: See
Above
““S””Table
= 45/55
Symmetry
2553 N. Edgington Street, Franklin Park, IL
“E” = Tri-State
““C”” = CMOS Output
“Blank” = 40/60% Symmetry
60131
Phone:Model
847.451.1000
Fax: Table
847.451.7585
Selection: See
Above
“S” = 45/55% Symmetry
800-888-1499 or “C”
www.champtech.com
= CMOS Output
2553 N. Edgington Street, Franklin
Park,
IL 60131
Phone:
847.451.1000
Model
Selection:
See Table
Above
1
Fax: 847.451.7585
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
800-888-1499 or www.champtech.com
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
1
Revision: 03-­01-­07
OBSOLETE
K1100BA, K1150BA, K1125BA, K1110BA Series
K1100BA Series
14 pin DIP, 5.0 Volt, Clock Oscillator
THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS.
5V Crystal Clock Oscillators
PLEASE REFER TO THE MHO+ PRODUCT SERIES.
PIN
FUNCTION
1
N/C / Tri-State
2
Ground
3
Output
4
+ VCC
SHIPPING TUBE CROSS SECTION
TEST CIRCUIT DIAGRAM
OUTPUT WAVEFORM
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
TEST METHODS
REFERENCE PROCEDURES
DESCRIPTION
Temperature Cycle
MIL-STD-833, Mtd 1010, Cond. B
-55°C to +125°C; Air-to-Air; 100 cycles; 10
min. dwell
Mechanical Shock
MIL-STD-883, Mtd 2002, Cond. B
1500 g’’s
Vibration
MIL-STD 883, Mtd 2007, Cond. B
20-2000 Hz; 0.06 inch; 15g’’s; 3 planes
Humidity Steady State
MIL-STD-202, Mtd 103
40°C; 90%-95% R.H.; 56 days
Thermal Shock
MIL-STD-883, Mtd 1011.7 Cond. B
100°C to 0°C; Water-to-Water; 15 cycles
Electrostatic Discharge
MIL-STD-883, Mtd 3015 Class II
2 KV to 4 KV Threshold
Solderability
Hermeticity
MIL-STD-883, Mtd 2022.2
MIL-STD-883, Mtd 1014.8, Cond. A1
Solder dip; Meniscograph Criteria
Mass spectro. 2 x 10-8 atmos. CC/sec He
Resistance to Soldering
Lead Integrity
MIL-STD-202, Mtd 210D, Cond. J
235°C; 30 seconds
MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress
Marking Permanence
Life Test
MIL-STD-883, Mtd 2015.8
MIL-STD-883, Mtd 1005.6
Resistance to solvents
125°C, powered, 1000 hours minimum
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
2553 N. Edgington Street, Franklin Park, IL 60131
Phone: 847.451.1000 Fax: 847.451.7585
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
800-888-1499 or www.champtech.com
2
Revision: 03-­01-­07
Similar pages