M2700/M2701 Series SPECIFICATION FOR 5.0x7.0mm CMOS SMT OSCILLATOR FEATURES APPLICATIONS CMOS Output Low RMS Jitter Performance 12 kHz to 20 MHz (1 ps max, 156.25 MHz) RoHS 6/6 Compliant Base station controllers Ethernet Test and Measurement Ordering Information: Temperature Range Product Family (Supply Voltage Option) Code 6 2 M2700 (3.3V) M2701 (2.5V) Value -20 °C to +70 °C -40 °C to +85 °C Example: M270024TCN 100.000000 MHz M2700 2 Stability Code 3 4 6 8 Enable/Disable Value ±100 ppm ±50 ppm ±25 ppm ±20 ppm Code T Logic Type Value Enable High (pad 1) 4 Code C T Value CMOS 45/55 Package/Lead Configuration Code N C Value Leadless Frequency MHz XXX.XXXXXX N 100.000000 LVPECL Electrical Specifications: Parameter Frequency of Operation Symbol FO Min. 10 Typ. Max. 250 Units MHz Conditions Frequency Stability Frequency Stability Aging F/F See ordering information +3 -3 ppm 1st year RF Output Output Type Output Load Symmetry (duty cycle) Logic Level “0” Logic Level “1” Rise/Fall Time Start-up Time CMOS Compatible 15 pF CMOS load 45 VOL VOH TR/TF TSU 55 10% Vdd 90% Vdd 5 10 70% VCC or N/C Enable Logic (Pad 1) Disable Logic (Pad 1) 30% VCC % V V ns ms Ref. to 50% Vdd V Output Enabled V Output Disabled to high-Z 10% Vdd to 90% Vdd Tambient = +25°C Supply Voltage & Power Consumption Operating Voltage VCC Supply Current ICC 3.135 2.375 3.300 2.500 3.465 2.625 60 V V mA (M2700) (M2701) Revision 0 01/31/16 Page 1 of 5 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. M2700/M2701 Series SPECIFICATION FOR 5.0x7.0mm CMOS SMT OSCILLATOR Environmental & Packaging Requirements: Storage Temperature Mechanical Shock Vibration Aging Humidity Thermal Cycle Hermeticity Moisture Sensitivity Level Solderability Max. Soldering Conditions Pad Termination Package Type -55°C to 125°C Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 ms) Per MIL-STD-202, Method 204D, Condition C (10 g’s, 55 – 2000 Hz) +85°C ±3°C, 720H (No BIAS) +40°C ±2°CX90~95%, 96H (NO BIAS) Per MIL-STD-883, Method 1010, Condition B (-55 °C to +125 °C, 10 cycles) Per MIL-STD-202, Method 112 (1 x 10-8 atm cc/s of Helium) MSL1 Per EIAJ-STD-002, Method 208 See solder profile, Figure 1 Gold, 1 µm maximum thickness 6-pad 5.0 X 7.0 mm leadless ceramic. RoHS compliant. Typical CMOS Test Circuit & Load Circuit Diagrams: Page 2 of 5 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. M2700/M2701 Series SPECIFICATION FOR 5.0x7.0mm CMOS SMT OSCILLATOR Marking, Pin Out: Pad 1 2 3 4 5 6 Function Enable/Disable No Connection Ground Output No Connection +VCC Line 1 Line 2 Line 3 Part Marking [part designation] FFFMFFFF M yy ww vv M F yy ww vv Legend MtronPTI Frequency Year Work Week Factory code Dimensions: Page 3 of 5 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. M2700/M2701 Series SPECIFICATION FOR 5.0x7.0mm CMOS SMT OSCILLATOR Output Waveform: Soldering Conditions: Figure 1 Figure 1 Page 4 of 5 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. M2700/M2701 Series SPECIFICATION FOR 5.0x7.0mm CMOS SMT OSCILLATOR Tape and Reel Specifications: Tape and Reel Specifications A B C D 5.32 7.28 1.5 7.5 E 2.2 F 4 G 8 H 16 J 178 K 13.5 L 24.8 M 80 Page 5 of 5 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI.