ROHM EDZ4.3B_2

EDZ4.3B
Diodes
Zener diode
EDZ4.3B
zApplications
Constant voltage control
zDimensions (Unit : mm)
㩷
㪇㪅㪏㫧㪇㪅㪇㪌
zLand size figure (Unit : mm)
㪇㪅㪈㪉㫧㪇㪅㪇㪌
㪇㪅㪍
㪇㪅㪏
㪈㪅㪍㫧㪇㪅㪈
㪈㪅㪉㫧㪇㪅㪇㪌
㪈㪅㪎
zFeatures
1) 2-pin ultra mini-mold type for high-density
mounting (EMD2).
2) High reliability.
3) Can be mounted automatically, using chip
mounter.
䌅㪤㪛㪉
zStructure
㪇㪅㪊㫧㪇㪅㪇㪌
zConstruction
Silicon epitaxial planar
㪇㪅㪍㫧㪇㪅㪈
㪩㪦㪟㪤㩷㪑㩷㪜㪤㪛㪉
㪡㪜㪛㪜㪚㩷㪑㪪㪦㪛㪄㪌㪉㪊
㪡㪜㪠㪫㪘㩷㪑㩷㪪㪚㪄㪎㪐
㪤㪸㫉㫂 㪜㪯㪅㩷㩷㪜㪛㪱㪊㪅㪍㪙
zTaping specifications (Unit : mm)
㪇㪅㪉㫧㪇㪅㪇㪌
㪉㪅㪇㫧㪇㪅㪇㪌
㱢㪈㪅㪌㫧㪇㪅㪇㪌
㪈㪅㪉㪍㫧㪇㪅㪇㪌
㩷㩷㩷㩷㪇
㪊㪅㪌㫧㪇㪅㪇㪌
㪇㪅㪍
㪉㪅㪋㪌㫧㪇㪅㪈
㪈㪅㪊㫧㪇㪅㪇㪍
㩷㩷㩷㪇
㪏㪅㪇㫧㪇㪅㪈㪌
㪈㪅㪎㪌㫧㪇㪅㪈
㪋㪅㪇㫧㪇㪅㪈
㪇㪅㪉
㱢㪇㪅㪌
㪇㪅㪐㪌㫧㪇㪅㪇㪍
㩷㩷㩷㩷㩷㩷㩷㩷㩷㪇
㪋㪅㪇㫧㪇㪅㪈
ⓨ䊘䉬䉾䊃
Empty poc ket
㪉㪅㪇㫧㪇㪅㪇㪌
㪇㪅㪎㪍㫧㪇㪅㪇㪌
zAbsolute maximum ratings (Ta=25qC)
Parameter
Power dissipation
Junction temperature
Storage temperature
Operating temperature
Symbol
P
Tj
Tstg
Topr
Limits
150
150
-55 to +150
-55 to +150
Unit
mW
㷄
㷄
㷄
Rev.D
1/4
EDZ4.3B
Diodes
zElectrical characteristics (Ta=25qC)
Symbol
TYP.
Zener voltage䋺Vz(V)
Operating
Rising operating
resistance䋺Zz(㱅㪀 resistance䋺Zz(㱅㪀
Reverse current䋺
IR(uA㪀
MIN.
MAX.
Iz(mA)
MAX. Iz(mA) MAX. Iz(mA)
MAX.
VR(V)
EDZ 3.6B 3.600
3.845
5.0
100
5.0
1000
10.0
1.0
1.0
EDZ 3.9B 3.890
4.160
5.0
100
5.0
1000
5.0
1.0
1.0
EDZ 4.3B 4.170
5.0
5.0
5.0
4.430
100
1000
1.0
1.0
EDZ 4.7B 4.550
5.0
5.0
2.0
4.750
100
800
0.5
1.0
EDZ 5.1B 4.980
5.0
5.0
2.0
5.200
80
500
0.5
1.5
EDZ 5.6B 5.490
5.0
5.0
1.0
5.730
60
200
0.5
2.5
EDZ 6.2B 6.060
5.0
5.0
1.0
6.330
60
100
0.5
3.0
EDZ 6.8B 6.650
5.0
5.0
0.5
6.930
40
60
0.5
3.5
EDZ 7.5B 7.280
5.0
5.0
0.5
7.600
30
60
0.5
4.0
EDZ 8.2B 8.020
5.0
5.0
0.5
8.360
30
60
0.5
5.0
EDZ 9.1B 8.850
5.0
5.0
0.5
9.230
30
60
0.5
6.0
EDZ 10B
5.0
5.0
0.1
9.770
10.210
30
60
0.5
7.0
EDZ 11B 10.760
5.0
5.0
0.1
11.220
30
60
0.5
8.0
EDZ 12B 11.740
5.0
5.0
0.1
12.240
30
80
0.5
9.0
EDZ 13B 12.910
5.0
5.0
0.1
13.490
37
80
0.5
10.0
EDZ 15B 14.340
5.0
5.0
0.1
14.980
42
80
0.5
11.0
EDZ 16B 15.850
5.0
5.0
0.1
16.510
50
80
0.5
12.0
EDZ 18B 17.560
5.0
5.0
0.1
18.350
65
80
0.5
13.0
EDZ 20B 19.520
5.0
85
5.0
0.1
20.390
100
0.5
15.0
EDZ 22B 21.540
5.0
5.0
0.1
㪈㪇㪇
22.470
100
0.5
17.0
EDZ 24B 23.720
5.0
5.0
0.1
㪈㪉㪇
24.780
120
0.5
19.0
EDZ 27B 26.190
2.0
2.0
0.1
㪈㪌㪇
27.530
150
0.5
21.0
EDZ 30B 29.190
2.0
2.0
0.1
㪉㪇㪇
30.690
200
0.5
23.0
EDZ 33B 32.150
2.0
2.0
0.1
㪉㪌㪇
33.790
250
0.5
25.0
36.870
300
0.5
27.0
EDZ 36B 35.070
2.0
2.0
0.1
㪊㪇㪇
(ϧ)The zener voltage(Vz) is measured 40ms after power is supplied.
(Ϩ)The operating resistances(Zz,Zzk) are measured by superimposing a minute alternating current
on the regulated current(Iz)
zType No.
TYPE
EDZ̛3.6B
EDZ̛3.9B
EDZ̛4.3B
EDZ̛4.7B
EDZ̛5.1B
EDZ̛5.6B
EDZ̛6.2B
EDZ̛6.8B
EDZ̛7.5B
EDZ̛8.2B
EDZ̛9.1B
EDZ̛10B
EDZ̛11B
㪫㪰㪧㪜䇭㪥㪦㪅
㪍㪉
㪎㪉
㪏㪉
㪐㪉
㪘㪉
㪚㪉
㪜㪉
㪝㪉
㪟㪉
㪡㪉
㪣㪉
㪇㪌
㪈㪌
TYPE
EDZ̛12B
EDZ̛13B
EDZ̛15B
EDZ̛16B
EDZ̛18B
EDZ̛20B
EDZ̛22B
EDZ̛24B
EDZ̛27B
EDZ̛30B
EDZ̛33B
EDZ̛36B
㪫㪰㪧㪜䇭㪥㪦㪅
㪉㪌
㪊㪌
㪋㪌
㪌㪌
㪍㪌
㪎㪌
㪏㪌
㪐㪌
㪘㪌
㪚㪌
㪜㪌
㪝㪌
̛
Rev.D
2/4
EDZ4.3B
Diodes
zElectrical characteristic curves (Ta=25qC)
㪈㪇
㪇㪅㪈
㪋㪅㪎
㪌㪅㪈
㪇㪅㪇㪈 㪋㪅㪊
㪍㪅㪉
㪈㪇
㪍㪅㪏
㪊㪅㪐
㪈㪈 㪈㪉
㪈㪊
㪎㪅㪌
㪌㪅㪍
㪈㪌
㪈㪍
㪉㪇
㪈㪏
㪏㪅㪉 㪐㪅㪈
㪊㪅㪍
㪉㪋
㪉㪉
㪉㪎
㪊㪍
㪊㪊
㪊㪇
㪇㪅㪇㪇㪈
㪇
㪌
㪈㪇
㪈㪌
㪉㪇
㪉㪌
㪊㪇
㪊㪌
㪋㪇
㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀
㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪈㪇㪇㪇㪇
㪈㪋㪇
㪩㪜㪭㪜㪩㪪㪜㩷㩷㩷㪪㪬㪩㪞㪜㩷㪤㪘㪯㪠㪤㪬㪤
㪧㪦㪮㪜㪩㪑㪧㪩㪪㪤㩿㪮㪀
㪧㪦㪮㪜㪩㩷㪛㪠㪪㪪㪠㪧㪘㪫㪠㪦㪥㪑㪧㪻㩿㫄㪮㪀
㪈㪍㪇
㪧㪩㪪㪤
㪈㪇㪇㪇
㪈㪉㪇
㪈㪇㪇
㪏㪇
㪍㪇
㪋㪇
㪉㪇
㪇
㪉㪌
㪌㪇
㪎㪌
㪈㪇㪇
㪈㪉㪌
㪈㪌㪇
㪈㪇
㪈
㪘㪤㪙㪠㪜㪥㪫㩷㪫㪜㪤㪧㪜㪩㪘㪫㪬㪩㪜㪑㪫㪸㩿㷄㪀
㪧㪻㪄㪫㪸䇭㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪇㪅㪈
㪈
㪈㪇
㪈㪇㪇
㪇㪅㪇㪏
㪊㪇
㪇㪅㪇㪍
㪉㪌
㪇㪅㪇㪋
㪉㪇
㪇㪅㪇㪉
㪈㪌
㪇
㪈㪇
㪄㪇㪅㪇㪉
㪄㪇㪅㪇㪋
㪌
㪄㪇㪅㪇㪍
㪇
㪄㪌
㪄㪇㪅㪇㪏
㪋㪇
㪈㪇㪇㪇
㪫㪩㪘㪥㪪㪠㪜㪥㪫
㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀
㪊㪌
㪫㪜㪤㪧㪅㪚㪦㪜㪝㪝㪠㪚㪠㪜㪥㪚㪜㪑㱏㫑㩿㫄㪭㪆㷄㪀
㪋㪇
㪇㪅㪈
㪈㪇
㪉㪇
㪊㪇
㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㫑㩿㪭㪀
㱏㫑㪄㪭㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪇㪅㪇㪈
㪫㪠㪤㪜㪑㫋㩿㫄㫊㪀
㪧㪩㪪㪤㪄㪫㪠㪤㪜㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪇㪅㪈㪉
㪇
㫋
㪈㪇㪇
㪇㪅㪈
㪇㪅㪇㪇㪈
㪇
㪫㪜㪤㪧㪅㪚㪦㪜㪝㪝㪠㪚㪠㪜㪥㪚㪜㪑㱏㫑㩿䋦㪆㷄㪀
㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀
㪈
㪩㫋㪿㩿㫁㪄㪸㪀
㪈㪇㪇
㪩㫋㪿㩿㫁㪄㪺㪀
㪈㪇
㪤㫆㫌㫅㫋㪼㪻㩷㫆㫅㩷㪼㫇㫆㫏㫐㩷㪹㫆㪸㫉㪻
㪠㪤㪔㪈㪇㫄㪘
㪈
㪈㫄㫊
㪠㪝㪔㪈㪇㪇㫄㪘
㫋㫀㫄㪼
㪊㪇㪇㫌㫊
㪇㪅㪈
㪇㪅㪇㪇㪈
㪇㪅㪇㪈
㪇㪅㪈
㪈
㪈㪇
㪈㪇㪇
㪫㪠㪤㪜㪑㫋㩿㫊㪀
㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪈㪇㪇㪇
Rev.D
3/4
EDZ4.3B
Diodes
㪈㪇㪇
㪈㪇
㪫㪸㪔㪈㪉㪌㷄
㪫㪸㪔㪉㪌㷄
㪫㪸㪔㪄㪉㪌㷄
㪇㪅㪈
㪽㪔㪈㪤㪟䌺
㪽㪔㪈㪤㪟䌺
㪇㪅㪇㪈
㪫㪸㪔㪎㪌㷄
㪈
㪇㪅㪈
㪫㪸㪔㪉㪌㷄
㪇㪅㪇㪈
㪫㪸㪔㪄㪉㪌㷄
㪇㪅㪇㪇㪈
㪇㪅㪇㪇㪇㪈
㪈㪇㪇
㪇㪅㪇㪇㪇㪇㪈
㪇㪅㪇㪇㪈
㪇
㪈
㪉
㪊
㪋
㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㫑㩿㪭㪀
㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪇
㪋㪅㪊
㪋㪅㪉
㪘㪭㪜㪑㪋㪅㪉㪏㪭
㪋㪅㪈
㪋
㪭㫑㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪇㪅㪏
㪫㪸㪔㪉㪌㷄
㪭㪩㪔㪈㪅㪇㪭
㫅㪔㪊㪇㫇㪺㫊
㪇㪅㪎
㪇㪅㪍
㪇㪅㪌
㪇㪅㪋
㪇㪅㪊
㪘㪭㪜㪑㪇㪅㪇㪐㪎㪐㫅㪘
㪇㪅㪉
㪈㪐㪇
㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥
㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀
㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀
㪋㪅㪋
㪇㪅㪉
㪇㪅㪋
㪇㪅㪍
㪇㪅㪏
㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀
㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪈
㪉㪇㪇
㪈
㪇㪅㪐
㪫㪸㪔㪉㪌㷄
㪠㪱㪔㪌㫄㪘
㫅㪔㪊㪇㫇㪺㫊
㪈㪇
㪈
㪇 㪇㪅㪈 㪇㪅㪉 㪇㪅㪊 㪇㪅㪋 㪇㪅㪌 㪇㪅㪍 㪇㪅㪎 㪇㪅㪏 㪇㪅㪐 㪈
㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀
㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪌
㪋㪅㪌
㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀
㪈㪇㪇㪇
㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥
㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀
㪈
㪫㪸㪔㪈㪉㪌㷄
㪈㪇
㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀
㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀
㪫㪸㪔㪎㪌㷄
㪈㪎㪇
㪈㪍㪇
㪈㪌㪇
㪈㪋㪇
㪘㪭㪜㪑㪈㪍㪌㪅㪍㫇㪝
㪈㪊㪇
㪈㪉㪇
㪇㪅㪈
㪈㪈㪇
㪇
㪈㪇㪇
㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪫㪸㪔㪉㪌㷄
㪽㪔㪈㪤㪟㫑
㪭㪩㪔㪇㪭
㫅㪔㪈㪇㫇㪺㫊
㪈㪏㪇
㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪛㪰㪥㪘㪤㪠㪚㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪱㫑㩿㱅㪀
㪈㪇㪇㪇㪇
㪈㪇㪇㪇
㪈㪇㪇
㪈㪇
㪇㪅㪈
㪈
㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀
㪱㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪈㪇
Rev.D
4/4
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : [email protected] rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0