Model # WN3125 Available as: Standard RF/Microwave Amplifier WN3125, 10 Pin 0.625” Sq. Surface Mount (SG4 Package) BX3125, SMA Connectorized Housing (H1L Housing) Features • Low Noise Figure: 2.7 dB • Wide 2 – 150 MHz Bandwidth • Environmental Screening Available • Unconditionally Stable • No External Circuitry Needed Typical Intermodulation Performance at 25 ºC • RoHS Compliant (Model WN3125LF) Technical Specifications Characteristic TYPICAL Ta = +25 ºC MIN/MAX Ta = -55ºC to +85 ºC Frequency 2 – 150 MHz 2 – 150 MHz Gain (dB) 22 20.5 Min. Power @ 1 dB Comp. (dBm) +26 +24 Min. Reverse Isolation (dB) -28 -- In 1.5:1 2.0:1 Max. Out 1.25:1 2.01 Max. Noise Figure (dB)* 2.9 4.0 Max. Power Vdc +15 +15 mA 145 160 Max. VSWR Second Order Harmonic Intercept Point: +70 dBm (Typ.) Second Order Two Tone Intercept Point: +65 dBm (Typ.) Third Order Two Tone Intercept Point: +42 dBm (Typ.) Note: Measured at 100 MHz at 25C. Absolute Maximum (No Damage) Ratings 1) Care should always be taken to effectively ground the case of each unit 2) Typical values are measured at 25°C, but not guaranteed. 3) Package drawings below are for reference only. *Noise Figure: 10-150 MHz Operating Temperature -55ºC to +100 ºC Storage Temperature -62ºC to +125ºC Case Temperature +125 ºC DC Voltage +18 Volts Continuous RF Input Power +13 dBm Rev Date: 1/22/2014 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # WN3125 Technical Performance Rev Date: 9/21/2015 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # WN3125 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. 1) Outlines drawings below are for reference only. Rev Date: 9/21/2015 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]