Model # BX9727 Available as: RF/Microwave Amplifier Features • High Output Power: +27 dBm • High Gain: 22 dB • Hermetic Laser Welded Housing • Environmental Screening Available Technical Specifications TYPICAL Ta = +25 ºC MIN/MAX Ta = -55ºC to +85 ºC 700 to 2700 MHz 700 – 2700 MHz Gain (dB) 22 20.5 Min. Power @ 1 dB Comp. (dBm) +27 +26 Min. Reverse Isolation (dB) -45 In Out Characteristic Typical Intermodulation Performance at 25 ºC Second Order Harmonic Intercept Point: +62 dBm (Typ.) Second Order Two Tone Intercept Point: +58 dBm (Typ.) -- Third Order Two Tone Intercept Point: +40 dBm (Typ.) 1.5:1 2.0:1 Max. Note: Measured midband 1.5:1 2.0:1 Max. Noise Figure (dB) 2.5 4.0 Max. Absolute Maximum (No Damage) Ratings Power Vdc +12 +12 Operating Temperature -55ºC to +100 ºC mA 280 300 Max. Storage Temperature -62ºC to +125ºC Case Temperature +125 ºC DC Voltage +15 Volts Continuous RF Input Power +13 dBm Short Term RF Input Power 200 Milliwatts (1 Minute Max.) Maximum Peak Power 0.5 Watt (3 µsec Max.) Frequency VSWR 1) Typical values are measured at 25°C, but not guaranteed. 2) Care should always be taken to effectively ground the case of each unit. 3) Package outlines drawings below for reference only. Mechanical & Electrical Parameter Specification Specification Temperatures (Min/Max) -55°C to +85°C Housing Size 1.58” L x 0.82” W x 0.44” H Housing Drawing H1L Package RF Connectors SMA Female Replaceable Connectors Rev Date: 14/29/2015 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BX9727 Typical Performance Graphs Rev Date: 4/29/2015 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BX9727 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Rev Date: 4/29/2015 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]