AVX Tantalum Division Surface Mount Military/Aerospace Products PART NUMBERING, TEST & PACKAGING OPTIONS Part Numbering: AVX part numbers have 19 character fields. Standard characters are used to denote AVX series, case size, capacitance code, capacitance tolerance, voltage code and standard / Low ESR designator. Test Designators: The following table is a cross-reference between AVX and MIL designators for the various termination, test and inspection options available: Symbol Parameter ^ Termination Finish # Lot inspection Conformance Level ++ Surge Current Test (also used for custom requiements) @ Voltage Conditioning (Reliability) Grade * Capacitance Tolerance 0 AVX SCD Designator Condition Hot Solder Dip Solder Fused Solder Plated Gold Matte Sn MIL QPL (JAN brand) DSCC Dwg Lab/SCD/SRC9000 Standard No Surge 10 Cycles Ambient 10 Cycles -55ºC & +85ºC 10 Cycles -55ºC & +85ºC Pre-Weibull Non ER B Weibull C Weibull D Weibull ±5% ±10% ±20% 0 = N/A 9 = SRC9000 Designator MIL C K H B – – – – – Z A B C A B C D J K M N/A N/A AVX 8 0 H 9 7 M D L S 00 23 24 45 Z B C D J K M 0 9 Packaging Designators: Due to the wide range of mounting processes that can be used for these products, there are many packaging options including bulk, tape / reel and waffle pack. Full dimensional information and packaging quantities are available in the packaging section (Applications Guide). Custom packaging is available for some product series (e.g. non-modular reel quantities, inverted in waffle (for wire bonding), special bar coding requirements, etc.). Please contact factory for custom requirements. Symbol Parameter Bulk Tape & Reel Waffle Pack 113015 Condition Bulk Bulk - ESD Packaging 4" Reel 7" Reel 13" Reel Waffle Pack Waffle - ESD Packaging Designator MIL Default – /TR4 /TR7 /TR13 /W – AVX B K X R S W L 7