CWR11 MIL-PRF-55365/8

METRIC
MIL-PRF-55365/8J
5 September 2014
SUPERSEDING
MIL-PRF-55365/8H
26 January 2011
PERFORMANCE SPECIFICATION SHEET
CAPACITORS, CHIP, FIXED, TANTALUM, POLARIZED
ESTABLISHED RELIABILITY, NON-ESTABLISHED RELIABILITY AND HIGH RELIABILITY,
STYLE CWR11 (METRIC)
This specification sheet is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and MIL-PRF-55365.
FIGURE 1. Style CWR11 (molded) capacitors.
AMSC N/A
FSC 5910
MIL-PRF-55365/8J
Dimensions
Case
code
H2
(min)
H
P
±0.3 (.012)
L
W
W2
±0.1 (.004)
(see note 4)
A
1.6 ±.2
(.063 ±.008)
0.7
(.028)
3.2 ±.2
(.126 ±.008)
0.8
(.031)
1.6 ±.2
(0.063 ±.008)
1.2
(.047)
B
1.9 ±.2
(.075 ±.008)
0.7
(.028)
3.5 ±.2
(.138 ±.008)
0.8
(.031)
2.8 ±.2
(.110 ±.008)
2.2
(.087)
C
2.5 ±.3
(.098 ±.012)
1.0
(.039)
6.0 ±.3
(.236 ±.012)
1.3
(.051)
3.2 ±.3
(.126 ±.012)
2.2
(.087)
D
2.8 ±.3
(.110 ±.012)
1.0
(.039)
7.3 ±.3
(.287 ±.012)
1.3
(.051)
4.3 ±.3
(.169 ±.012)
2.4
(.094)
NOTES:
1. Dimensions are in millimeters. Inch equivalents are given in parenthesis for general information only.
2. These capacitors are designed for mounting by dip or wave soldering, reflow soldering, thermo-compression
bonding, or other conventional means.
3. The anode (+) terminal shall be indicated by a marking on the case or by bevel on anode end.
4. Applicable to solderable surfaces only. The configuration of the nonsolderable area is optional.
5. Solderable surfaces are only those surfaces designated as such. Termination edges are not considered
solderable.
6. For solder coated terminations, add an additional 0.38 mm (.015 inch) to the tolerances for “L”, “H”, “P”, and
“W 2” for each case size.
FIGURE 1. Style CWR11 (molded) capacitors - Continued.
2
MIL-PRF-55365/8J
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Termination finish: In accordance with MIL-PRF-55365.
DC rated voltage: See table I. Above +85°C, voltage derating is required (see MIL-PRF-55365).
Operating temperature range: -55°C to +125°C.
Product level designator: In accordance with MIL-PRF-55365.
DC leakage (DCL): See table I.
Capacitance: See table I.
Capacitance tolerance: ±5 percent (J), ±10 percent (K), or ±20 percent (M).
Dissipation factor (DF): See table I.
Equivalent series resistance (ESR) at 100 kHz: In accordance with MIL-PRF-55365. See table I.
Resistance to soldering heat: In accordance with MIL-PRF-55365.
Stability at low and high temperatures: In accordance with MIL-PRF-55365.
Life:
2,000 hours: In accordance with MIL-PRF-55365.
10,000 hours: In accordance with MIL-PRF-55365.
Solderability: In accordance with MIL-PRF-55365, except that following steam aging; test samples may have a
30 minute bake out at +150°C prior to solder dipping.
Marking: In accordance with MIL-PRF-55365, to be marked on top of case as follows: Print orientation is
optional.
Case code A
J
105X
Case codes B, C, and D
(+) polarity stripe, J = JAN
- capacitance in picofarad code
manufacturer's identifier
J
105
35X
(+) polarity stripe, J = JAN
- capacitance in picofarad code
- rated voltage; manufacturer's
identifier
Alternate case code A marking
X
105J
(+) polarity stripe, X = manufacturer's identifier
- capacitance in picofarad code; J = JAN
At the option of the manufacturer, the lot date code may be marked on the top of the case for any case code.
3
MIL-PRF-55365/8J
TABLE I. Style CWR11 characteristics.
Part or
identifying number
(PIN)
1/
CWR11C-225 - - CWR11C-475 - - CWR11C-685 - - CWR11C-106 - - CWR11C-156 - - CWR11C-336 - - CWR11C-686 - - CWR11C-107 - - CWR11D-155 - - CWR11D-225 - - CWR11D-335 - - CWR11D-475 - - CWR11D-685 - - CWR11D-106 - - CWR11D-156 - - CWR11D-226 - - CWR11D-476 - - CWR11D-686 - - CWR11F-105 - - CWR11F-155 - - CWR11F-225 - - CWR11F-335 - - CWR11F-475 - - CWR11F-685 - - CWR11F-156 - - CWR11F-336 - - CWR11F-476 - - CWR11H-684 - - CWR11H-105 - - CWR11H-155 - - CWR11H-225 - - CWR11H-335 - - CWR11H-475 - - CWR11H-106 - - CWR11H-226 - - CWR11H-336 - - CWR11J-474 - - CWR11J-684 - - CWR11J-105 - - CWR11J-155 - - CWR11J-225 - - CWR11J-335 - - CWR11J-475 - - CWR11J-685 - - CWR11J-156 - - CWR11J-226 - - -
DC rated
voltage
(+85°C)
Cap.
(nom)
Volts
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
10
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
15
15
20
20
20
20
20
20
20
20
20
20
µF
2.2
4.7
6.8
10.0
15.0
33.0
68.0
100.0
1.5
2.2
3.3
4.7
6.8
10.0
15.0
22.0
47.0
68.0
1.0
1.5
2.2
3.3
4.7
6.8
15.0
33.0
47.0
0.68
1.0
1.5
2.2
3.3
4.7
10.0
22.0
33.0
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
15.0
22.0
DC Leakage
(max)
+25°C
+85°C
+125°C
µA
0.5
0.5
0.5
0.5
0.6
1.3
2.7
4.0
0.5
0.5
0.5
0.5
0.5
0.6
0.9
1.4
2.8
4.3
0.5
0.5
0.5
0.5
0.5
0.7
1.5
3.3
4.7
0.5
0.5
0.5
0.5
0.5
0.7
1.6
3.3
5.3
0.5
0.5
0.5
0.5
0.5
0.7
1.0
1.4
3.0
4.4
µA
5.0
5.0
5.0
5.0
6.0
13.0
27.0
40.0
5.0
5.0
5.0
5.0
5.0
6.0
9.0
14.0
28.0
43.0
5.0
5.0
5.0
5.0
5.0
7.0
15.0
33.0
47.0
5.0
5.0
5.0
5.0
5.0
7.0
16.0
33.0
53.0
5.0
5.0
5.0
5.0
5.0
7.0
10.0
14.0
30.0
44.0
µA
6.0
6.0
6.0
6.0
7.2
15.6
32.4
48.0
6
6
6
6
6
7.2
10.8
16.8
33.6
51.6
6.0
6.0
6.0
6.0
6.0
8.4
18.0
39.6
56.4
6.0
6.0
6.0
6.0
6.0
8.4
19.2
39.6
63.6
6.0
6.0
6.0
6.0
6.0
8.4
12.0
16.8
36.0
52.8
See footnote at end of table.
4
Dissipation factor
(max)
+85°C
+25°C
-55°C
+125°C
%
%
%
6
9
9
6
9
9
6
9
9
6
9
9
6
9
9
6
9
9
6
9
9
8
12
12
6
9
9
6
6
9
6
9
9
6
9
9
6
6
9
6
9
9
6
6
9
6
9
9
6
6
9
6
9
9
4
6
6
6
6
9
6
9
9
6
9
9
6
9
9
6
9
9
6
6
9
6
9
9
6
9
9
4
6
6
4
6
6
6
9
9
6
9
9
6
8
9
6
9
9
6
8
9
6
8
9
6
9
9
4
6
6
4
6
6
4
6
6
6
9
9
6
8
9
6
9
9
6
8
9
6
9
9
6
8
9
6
9
9
Max
ESR 100 Case
kHz
size
+25°C
Ohms
8.0
A
8.0
A
5.5
B
4.0
B
3.5
B
2.2
C
1.1
D
0.9
D
8.0
A
8.0
A
8.0
A
5.5
B
4.5
B
3.5
B
3.0
C
2.2
C
1.1
D
0.9
D
10.0
A
8.0
A
8.0
A
5.5
B
4.5
B
3.5
B
2.5
C
1.1
D
0.9
D
12.0
A
10.0
A
8.0
A
5.5
B
5.0
B
4.0
B
2.5
C
1.1
D
0.9
D
14.0
A
12.0
A
10.0
A
6.0
B
5.0
B
4.0
B
3.0
C
2.4
C
1.1
D
0.9
D
MIL-PRF-55365/8J
TABLE I. Style CWR11 characteristics - Continued.
Part or
identifying number
(PIN)
1/
CWR11K-334 - - CWR11K-474 - - CWR11K-684 - - CWR11K-105 - - CWR11K-155 - - CWR11K-225 - - CWR11K-335 - - CWR11K-475 - - CWR11K-685 - - CWR11K-106 - - CWR11K-156 - - CWR11M-104 - - CWR11M-154 - - CWR11M-224 - - CWR11M-334 - - CWR11M-474 - - CWR11M-684 - - CWR11M-105 - - CWR11M-155 - - CWR11M-225 - - CWR11M-335 - - CWR11M-475 - - CWR11M-685 - - CWR11N-104 - - CWR11N-154 - - CWR11N-224 - - CWR11N-334 - - CWR11N-474 - - CWR11N-684 - - CWR11N-105 - - CWR11N-155 - - CWR11N-225 - - CWR11N-335 - - CWR11N-475 - - -
DC rated
voltage
(+85°C)
Cap.
(nom)
Volts
25
25
25
25
25
25
25
25
25
25
25
35
35
35
35
35
35
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
µF
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10.0
15.0
0.10
0.15
.22
.33
.47
.68
1.0
1.5
2.2
3.3
4.7
6.8
.10
.15
.22
.33
.47
.68
1.0
1.5
2.2
3.3
4.7
DC Leakage
(max)
+25°C
+85°C
+125°C
µA
0.5
0.5
0.5
0.5
0.5
0.6
0.9
1.2
1.7
2.5
3.8
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
1.2
1.7
2.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
1.1
1.7
2.4
µA
5.0
5.0
5.0
5.0
5.0
6.0
9.0
12.0
17.0
25.0
38.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
8.0
12.0
17.0
24.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
8.0
11.0
17.0
24.0
µA
6.0
6.0
6.0
6.0
6.0
7.2
10.8
14.4
20.4
30.0
45.6
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
9.6
14.4
20.4
28.8
12
6.0
6.0
6.0
6.0
6.0
6.0
9.6
13.2
20.4
28.8
Dissipation factor
(max)
+85°C
+25°C
-55°C
+125°C
%
%
%
4
6
6
4
6
6
4
6
6
4
6
6
6
8
9
6
9
9
6
8
9
6
9
9
6
9
9
6
8
9
6
9
9
4
6
6
4
6
6
4
6
6
4
6
6
4
6
6
4
6
6
4
6
6
6
8
9
6
8
9
6
8
9
6
8
9
6
9
9
6
8
8
4
6
6
4
6
6
4
6
6
4
6
6
4
6
6
4
6
6
6
8
9
6
8
9
6
9
9
6
9
9
Max
ESR 100 Case
kHz
size
+25°C
Ohms
15.0
A
14.0
A
7.5
B
6.5
B
6.5
B
3.5
C
3.5
C
2.5
C
1.4
D
1.2
D
1.0
D
24.0
A
21.0
A
18.0
A
15.0
A
10.0
B
8.0
B
6.5
B
4.5
C
3.5
C
2.5
C
1.5
D
1.3
D
22.0
A
17.0
B
14.0
B
12.0
B
8.0
C
7.0
C
6.0
C
4.0
D
2.5
D
2.0
D
1.5
D
1/ Complete PIN shall include additional symbols to indicate termination finish, capacitance tolerance, product
level, and, if applicable, surge current option letter. If optional surge current is not required, the last "-"
shall be deleted.
5
MIL-PRF-55365/8J
Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where
changes from the previous issue were made. This was done as a convenience only and the Government
assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to
evaluate the requirements of this document based on the entire content irrespective of the marginal notations and
relationship to the last previous issue.
Custodians:
Army - CR
Navy - EC
Air Force - 85
DLA - CC
Preparing activity:
Army - CR
Review activities:
Army - AR, MI
Navy - AS, MC, OS, SH
Air Force - 19, 99
NASA – NA
(Project 5910-2014-022)
Agent:
DLA - CC
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities change, you should verify the currency of the information above using the
ASSIST Online database at https://assist.dla.mil/.
6