SKS 290F B6U 195 V16 Electrical Characteristics Symbol Conditions min Electrical Data Maximum DC current TAMBIENT = 35°C ; No overload ID Maximum AC voltage (+/-10%) VAC DC Bus voltage VBUS Maximum stack power PTOTAL Stack power loss (TAMBIENT = 35°C) PLOSS Environnmental Data Symbol Diode Module stack Fan Data Three phase uncontrolled rectifier Type VFAN fFAN IFAN PFAN Ordering No. 08785124 Description SKS 290F B6U 195 V16 min Unit A VAC VDC kW W typ max Unit 1 000 kg m 11090806.01.A ~ 6,9 IP00 2 SEMIKRON fan designation Fan voltage Fan frequency Fan maximum input current Fan power Stack Protection Symbol Features max 290 500 670 195 Mechanical Data SEMIKRON document number.revision.version Drawing Approximate total weight Weight Installation altitude without derating Altitude IEC 60529 Protection Pollution degree EN 50178 SEMISTACK® CLASSICS - B6U Preliminary data Conditions typ SKF 3-230-01 VAC Hz A W 230 50/60 0.12/0.10 15/14 Conditions min typ max Unit RC Circuit Isolated power stacks SKKD 162/16 Heatsink P3/265 Forced air cooling RC circuit included Thermo trip included Type R C RC in parallel with bridge rectifier Resistance (11W) Bimetal Thermal Trip Switching temperature over which thermal trip is open TS ITC MAX Typical Applications Maximum permissible current at 240VAC at 30VDC 1/2 RC15B 68 0.1 Ohm µF 90 1 3 °C A A Power supplies Rectifier for AC/DC motor control Remarks This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee, expressed or implied, is made regarding delivery, performance or suitability. B6U © by SEMIKRON Rev. 0 - 11.10.2012 1 SKS 290F B6U 195 V16 Dimensions This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev. 0 - 11.10.2012 2