M310x Series Datasheet

M310x Series
5x7 mm, 3.3/2.5/1.8 Volt,
LVPECL/LVDS/CML, VCXO
Product Features
 Featuring QiK ChipTM Technology
 From order to ship in 2 weeks
 Superior Jitter Performance (less than 0.25 ps RMS,
12 kHz - 20 MHz)
 APR from ±50 to ±300ppm over industrial temperature range
 SAW replacement performance
 Frequencies from 150 MHz to 1.4 GHz
QiK Chip™
Product Description
The M310x series of VCXO’s is designed with a hermetically sealed high precision AT cut quartz crystal,
combined with our QiK ChipTM technology. This combination provides an industry setting 0.35 ps RMS jitter
performance and excellent Phase Noise for your demanding circuit. The M310x is available in LVPECL, LVDS,
or CML output and can be built to a variety of power requirements, 3.3, 2.5, and 1.8V. Tight thermal stability
performance, broad frequency range, in a small 5x7 mm package, and the ability to build and provide product
in approximately 2 weeks, gives the designer a quick, solid foundation to build a solution with.
Product Applications
 Telecommunications such as SONET / SDH /
DWDM / FEC / SERDES / OC-3 thru OC-192
 Wireless base stations / WLAN / Gigabit Ethernet
 xDSL, Network Communications
 Avionic Flight Controls
 Military Communications
 Clock and Data Recovery
 Low Jitter Clock Generation
Product Ordering Information
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Revision: 11-5-10
M310x Series
5x7 mm, 3.3/2.5/1.8 Volt,
LVPECL/LVDS/CML, VCXO
Electrical Specifications
Performance Characteristics
PARAMETER
Frequency Range
Operating Temperature
Storage Temperature
Frequency Stability
Aging
1st Year
Thereafter (per year)
Pullability/APR
Gain Transfer Function
Symbol
F
TA
TS
∆F/F
Control Voltage
Vc
Linearity
Modulation Bandwidth
Input Impedance
Supply Voltage
fm
Zin
Vcc
Input Current
Load
Icc
Min.
Typ.
Max.
50
1400
(See ordering information)
-55
+125
±25
Units
MHz
-3
+3
-1
+1
(See ordering information)
90
135
180
0.18
0.90
1.62
0.25
1.25
2.25
0.30
1.65
3.0
1
5
10
500k
1M
1.71
1.8
1.89
2.375
2.5
2.625
3.135
3.3
3.465
125
ppm
ppm
45
Output Skew
Differential Voltage
Vod
Vod
Common Mode
Output Voltage
Vcm
Logic “1” Level
Voh
Logic “0” Level
Rise/Fall Time
Enable Function
Vol
Tr/Tf
Start up Time
Phase Jitter
@ 622.08 MHz
Environmental
°C
ppm
ppm/V
ppm/V
ppm/V
V
V
V
%
KHz
Ohms
V
V
V
mA
Mechanical Shock
Vibration
Max Soldering Conditions
Hermeticity
Solderability
φJ
250
0.7
20
15
20
350
0.95
1.2
Vcc 1.02
55
%
450
1.20
ps
ps
ps
mV
Vpp
V
LVDS
V
LVPECL
Vcc -1.63
V
0.23
0.35
ns
80% Vcc min or N/C: Output active
0.5V max: Output disables to high-Z
0.5V max or N/C: Output active
80% Vcc min: Output disables to high-Z
10
ms
0.25
See Note 2
For ±50 ppm APR
For ±100 ppm APR
For ±200 ppm APR
@ 1.8V Vcc
@ 2.5V Vcc
@ 3.3V Vcc
Positive Monotonic
-3 dB bandwidth
@ DC
LVDS/CML
LVPECL/LVDS/CML
See Note 3
LVPECL Waveform
LVDS/CML Waveform
LVPECL: Vdd-1.3 V
LVDS: 1.25 V
LVPECL
CML
LVDS
LVDS
CML
50 Ohms to (Vcc –2) Vdc
100 Ohm differential load
Symmetry (Duty Cycle)
Condition/Notes
See Note 1
ps RMS
LVPECL
@ 20/80% LVPECL, LVDS, CML
Output Option G
Output Option M
Integrated 12 kHz – 20 MHz
Per MIL-STD-202, Method 213, Condition C
Per MIL-STD-202, Method 201 & 204
See solder profile, Figure 1
Per MIL-STD-202, Method 112 (1 x 10-8 atm cc/s of helium)
Per MIL-STD-883, Method 203
Note 1: Contact factory for standard frequency availability over 945 MHz.
Note 2: APR specification is inclusive of initial tolerance, deviation over temperature, shock, vibration, supply voltage, and aging
for one year at 50°C mean ambient temperature.
Note 3: See Load Circuit Diagram in this Datasheet. Consult factory with nonstandard output load requirements.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M310x Series
5x7 mm, 3.3/2.5/1.8 Volt,
LVPECL/LVDS/CML, VCXO
Phase Noise Plot
Output Waveform
Output Waveform: LVDS/CML/PECL
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M310x Series
5x7 mm, 3.3/2.5/1.8 Volt,
LVPECL/LVDS/CML, VCXO
Product Dimension & Pinout Information
6 Pad Standard Option
9 Pad Option
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M310x Series
5x7 mm, 3.3/2.5/1.8 Volt,
LVPECL/LVDS/CML, VCXO
Handling Information
Although protection circuitry has been designed into the M310x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industrywide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is
widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was
obtained using these circuit parameters.
Quality Parameters
Part Marking Guide
Line 1: Model Number
Line 2: Frequency
Line 3: Date Code
Line 4: Pin 1 Indicator / MtronPTI
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
5
M310x Series
5x7 mm, 3.3/2.5/1.8 Volt,
LVPECL/LVDS/CML, VCXO
Tape & Reel Specifications
(all measurements
are in mm)
M310x
A
B
C
D
E
F
G
H
I
J
K
L
6.51
9.29
1.5
7.5
2.8
4
8/12
16
180-330
13
21
60-100
Standard Tape and Reel: 100 parts per reel
Maximum Soldering Conditions
Solder Conditions
Note: Exceeding these limits may damage the device.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
6
M310x Series
5x7 mm, 3.3/2.5/1.8 Volt,
LVPECL/LVDS/CML, VCXO
Typical Test Circuit & Load Circuit Diagrams
Product Revision Table
Date
7/20/07
Revision
A
PCN Number Details of Revision
10118
IC Revision to improve phase noise and electrical performance
For custom products or additional specifications contact our sales team at
800.762.8800 (toll free) or 605.665.9321
For more information on this product visit the MtronPTI website at
www.mtronpti.com
7