M31x Series Multiple Frequency VCXO Datasheet

M31x Series Multiple Frequency VCXO
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Product Features
•
•
•
•
•
•
•
Multiple Output Frequencies (2, 3, or 4) - Selectable
QiK ChipTM Technology
Superior jitter performance (less than 0.25 ps RMS,
12 kHz - 20 MHz)
APR from ±50 to ±300 ppm over industrial temperature range
SAW replacement - better performance
Frequencies from 50 MHz - 1.4 GHz (LVDS/LVPECL/CML)
Frequencies from 10 MHz to 150 MHz (HCMOS)
QiK Chip™
Product Description
The multiple frequency VCXO utilizes MtronPTI’s Qik ChipTM technology to provide a very low jitter clock for all
output frequencies. The M31x is available with up to 4 different frequency outputs from 10MHz through 1.4
GHz. Unlike traditional VCXO’s where multiple crystals are required for each frequency, the M31x utilizes a
rock solid fundamental 3rd overtone crystal and the Qik ChipTM IC to provide the wide range of output frequencies. Using this design approach, the M31x provides exceptional performance in frequency stability, jitter,
phase noise and long term reliability.
Product Applications
•
•
•
•
•
Global/Regional selection
Forward Error Correction (FEC) / Selectable Functionality applications
Telecommunications such as SONET / SDH / DWDM / FEC / SERDES
/ OC-3 thru OC-192
1-2-4-10 Gigabit Fibre Channel
Wireless base stations / WLAN / Gigabit Ethernet
•
•
•
•
•
•
xDSL, Network Communications
Avionic flight controls
Military Communications
Clock and data recovery
Low jitter clock generation
Frequency margining
Product Ordering Information
M3120Sxxx, M3121Sxxx, M3122Sxxx
M3130Sxxx, M3131Sxxx, M3132Sxxx
M3140Sxxx, M3141Sxxx, M3142Sxxx
Contact factory for datasheets.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Revision: 09-09-10
M31x Series Multiple Frequency VCXO
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Performance Characteristics
PARAMETER
Frequency Range
Symbol
F
Min.
Electrical Specifications
50
10
Operating Temperature
Storage Temperature
Frequency Stability
Aging
1st Year
Thereafter (per year)
Pullability/APR
Gain Transfer Function
TA
TS
∆F/F
Control Voltage
Vc
0.18
0.25
0.30
Linearity
Modulation Bandwidth
Input Impedance
Supply Voltage
fm
Zin
Vcc
10
500k
1.71
2.375
3.135
Input Current
Icc
-55
Typ.
Max.
Units
1400
MHz
150
MHz
-20°C to +70°C or -40°C to +85°C
+125
°C
ppm
±25
-3
-1
+3
ppm
+1
ppm
See Ordering Information
90
ppm/V
135
ppm/V
180
Ppm/V
0.90
1.62
V
1.25
2.25
V
1.65
3.0
V
1
5
%
KHz
1M
Ohms
1.8
1.89
V
2.5
2.625
V
3.3
3.465
V
125
mA
80
mA
50 Ohms to (Vcc –2) Vdc
100 Ohm differential load
15
pF
45
55
%
450
1.20
ps
ps
ps
mV
Vpp
V
LVDS
V
LVPECL
HCMOS
LVPECL
HCMOS
@ 20/80% LVPECL, LVDS, CML
Ref. 10%-90% Vdd HCMOS
Output Skew
Differential Voltage
Common Mode
Output Voltage
Logic “1” Level
Vod
Vod
250
0.7
Vcm
20
15
20
350
0.95
1.2
Voh
Vcc -1.02
90% Vdd
Logic “0” Level
Vol
Rise/Fall Time
Tr/Tf
Vcc -1.63
V
10% Vdd
0.23
0.35
ns
6.0
ns
80% Vcc min or N/C: Output active
0.5V max: Output disables to high-Z
0.5V max or N/C: Output active
80% Vcc min: Output disables to high-Z
See Truth Table
10
ms
10
ms
φJ
φJ
0.50
1.0
ps RMS
ps RMS
Customer Specified (Pad 2)
Customer Specified (Pad 2)
To within ± 1 ppm of frequency
Integrated 12 kHz – 20 MHz
HCMOS (12kHz – 20 MHz)
Environmental
Enable Function
Option G
Enable Function
Option M
Frequency Selection
Settling Time
Start up Time
Phase Jitter
@ 622.08 MHz
@ 125 MHz
See Note 2
For ± 50 ppm APR
For ± 100 ppm APR
For ± 200 ppm APR
@ 1.8V Vcc
@ 2.5V Vcc
@ 3.3V Vcc
Positive Monotonic
-3 dB bandwidth
@ DC
LVPECL/LVDS/CML
HCMOS
See Note 3
LVPECL Waveform
LVDS/CML Waveform
CMOS Waveform
LVPECL: Vdd – 1.3 V
LVDS: 1.25 V
LVPECL
CML
LVDS
LVDS
CML
Load
Symmetry (Duty Cycle)
Condition/Notes
See Note 1
LVPECL/LVDS/CML
HCMOS
Customer Specified
Mechanical Shock
Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 mS duration, ½ sinewave)
Vibration
Per MIL-STD-202, Method 201 & 204 (10 g’s from 10-2000 Hz)
Hermeticity
Per MIL-STD-202, Method 112, (1x10-8 atm. cc/s of Helium)
Thermal Cycle
Per MIL-STD-883, Method 1010, Condition B (-55°C to +125°C, 15 min. dwell, 10 cycles)
Solderability
Per EIAJ-STD-002
Max. Soldering Cond.
See solder profile, Figure 1
Note 1: Contact factory for standard frequency availability over 945 MHz.
Note 2: APR specification is inclusive of initial tolerance, deviation over temperature, shock, vibration, supply voltage, and aging
for one year at 50°C mean ambient temperature.
Note 3: See Load Circuit Diagram in this Datasheet. Consult factory with nonstandard output load requirements.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M31x Series Multiple Frequency VCXO
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Phase Noise Plot
Output Waveform
Output Waveform: LVDS / CML / LVPECL
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M31x Series Multiple Frequency VCXO
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Product Dimension & Pinout Information
DENOTES PIN 1
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M31x Series Multiple Frequency VCXO
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Handling Information
Although protection circuitry has been designed into the M31x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industrywide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is
widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was
obtained using these circuit parameters.
Quality Parameters
Part Marking Guide
Line 1: Model Number
Line 2: Frequency
Line 3: Date Code
Line 4: Pin 1 Indicator / MtronPTI
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
5
M31x Series Multiple Frequency VCXO
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Tape & Reel Specifications
(all measurements
are in mm)
M31x
A
B
C
D
E
F
G
H
I
J
K
L
6.51
9.29
1.5
7.5
2.8
4
8/12
16
180-330
13
21
60-100
Standard Tape and Reel: 1000 parts per reel
Maximum Soldering Conditions
Solder Conditions
Note: Exceeding these limits may damage the device.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
6
M31x Series Multiple Frequency VCXO
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Typical Test Circuit & Load Circuit Diagrams
Product Revision Table
Date
7/20/07
Revision
A
PCN Number Details of Revision
10118
IC Revision to improve phase noise and electrical performance
For custom products or additional specifications contact our sales team at
800.762.8800 (toll free) or 605.665.9321
For more information on this product visit the MtronPTI website at
www.mtronpti.com
7