English Datasheet

400A AC/DC Clamp-on Adaptor + NCV
AC/DC Current measurements to 400A
With built-in non-contact AC voltage detector
• Fits virtually any MultiMeter with standard
shrouded banana plug sockets
• Built-in non-contact voltage detector with LED alert
• 1.2" (30mm) clamp jaw
• Measures AC/DC Current in two ranges:
0 to 40A (10mV per Amp output) and
0 to 400A (1mV per Amp output)
• ±2.5% basic accuracy
• DC zero adjust
• Dims: 5.8 x 2.3 x 1.3" (146 x 60 x 32mm)
Weight: 8oz (226g)
• Complete with built-in 3.8ft (1.1m) cable with
banana plugs and two AAA batteries
Converts your MultiMeter into a 400A AC/DC Clamp Meter
Ordering Information:
CA250 ..........400A AC/DC Clamp-on Adaptor + NCV
Specifications subject to change without notice.
6/23/09 - R1
Copyright © 2009 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.