1N6626-1N6631 ULTRA FAST RECTIFIERS High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Rating Value Junction temperature -65° to 150°C Storage temperature -65° to 175°C Peak forward surge current @ 25°C (1) 1N6626-1N6630 75A 1N6631 60A (2) Average rectified forward current @ TL = 75°C 1N6626-1N6628 2.3A 1N6629-1N6631 1.8A (3) Average rectified forward current at TA = 25°C 1N6626-1N6628 1.75A 1N6629-1N6631 1.40A Thermal resistance L = 0.375” 22°C/W Capacitance at VR = 10V 40pF Solder temperature 260°C for 10 s maximum Note 1: Test pulse = 8.3 ms, half-sine wave. Note 2: Derate linearly at 1.0%/°C for T L > 75°. Note 3: Derate linearly at 0.80%/°C for TA > 25°C. This is typical for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where T J(max) is not exceeded. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Working peak reverse voltage Minimum breakdown voltage Maximum reverse current Max forward voltage Part number VRWM VR IR @ VRWM IR = 50μA V F @ IF Maximum reverse recovery time Maximum reverse recovery time (low current) (1) (high current)(2) trr TA=25°C TA=150°C trr Peak Recovery Current (2) Maximum forward Recovery Voltage IRM (rec) VFRM IF = 2A IF = 0.5A 100A/μS tr = 12ns V V V@A V@A μA μA ns ns A V 1N6626 200 220 [email protected] [email protected] 2.0 500 30 45 3.5 8 1N6627 400 440 [email protected] [email protected] 2.0 500 30 45 3.5 8 1N6628 600 660 [email protected] [email protected] 2.0 500 30 45 3.5 8 1N6629 800 880 [email protected] [email protected] 2.0 500 50 60 4.2 12 1N6630 900 990 [email protected] [email protected] 2.0 500 50 60 4.2 12 1N6631 1000 1100 [email protected] [email protected] 4.0 600 60 80 5.0 20 Note 1: Low Current Reverse Recovery Time Test Conditions I F = 0.5A, IRM = 1.0A, IR(REC) = 0.25A. Note 2: High Current Reverse Recovery Time Test Conditions I F = 2.0A, 100A/µs, MIL-STD-750, METHOD 4031, CONDITION D. Rev. 20131216 High-reliability discrete products and engineering services since 1977 1N6626-1N6631 ULTRA FAST RECTIFIERS MECHANICAL CHARACTERISTICS Case: Digi J Marking: Body painted, Alpha-numeric Polarity: Cathode band Rev. 20131216 High-reliability discrete products and engineering services since 1977 1N6626-1N6631 ULTRA FAST RECTIFIERS Rev. 20131216